WCD-type curved crescent car stopper is composed of left and right brake body connecting plates, signs and other parts, which are connected with steel rails through fasteners. When the vehicle escapes and hits the car stopper, the car stopper brakes the vehicle through the arc treads of the left and right brake bodies.
WCD series crescent bumper (East) is mainly used for 43kg, 50kg and 60kg track types. Because the parked car is close to the crescent car stop in the depot, and the track slope in the depot is small or no slope, even if the car escapes, the crescent car stop is very low, so it is designed and installed at the terminal of the line. If a (middle) car escapes and hits the crescent car stop, the escaping car will be forcibly stopped.
HS-type sliding lifting crescent-shaped car arrester uses the combination of wheel block and damper to brake the escaping vehicle, that is, besides the braking function of wheel block, the damper can also provide greater braking capacity, and the kinetic energy of the escaping vehicle is consumed by friction work.
CDH-C plug-in sliding car stopper is a safety device installed at the end line of railway, which is used to prevent vehicles from hitting the car stopper when they escape. CDH-C20 car stopper is an improvement of CDH car stopper, with reasonable structure and large braking force. The arm and the brake rail are connected in a plug-in way, which is convenient for installation, maintenance and reset.