Xiao Li studied "104 1" pickup truck for 30 hours. On the morning of June 19, he came to the driving school as scheduled and continued to practice the post-test project. After several practice sessions, the coach said that he played a little slowly.
Xiao Li told reporters that although he is very aware of the existing problems (such as slow driving direction, it is easy to judge the position of the wheel by the turning angle of the steering wheel, and sometimes it is easy to make mistakes and lead to rod collision). ), he also listened to the coach explain the correct method, but made a "wrong" approach as soon as he got on the bus.
Teacher Shen studied Santana and is now practicing for the post exam. When reversing the garage, because the speed is a little fast, it is impossible to adjust the position of the vehicle in time, resulting in the right rearview mirror hitting the right pole in front.
Common faults: the driving direction is too slow, the vehicle position cannot be correctly judged, and the vehicle speed is too fast.
Correction: Xiao Li's coach, Master Wang, told the reporter that when taking the exam, the students must try to be slow and play fast and clean at the same time. In addition, we must strictly abide by the principle of "crossing" to avoid "wheel rubbing", which is conducive to correctly judging the vehicle position and wheel direction at any time. Be sure to control the speed. If the speed is slow, you can adjust the position of the vehicle at any time to avoid hitting the telephone pole.
Fixed point slope
In the driving test driving range of a driving school in Beijing, the practice field of fixed-point climbing is divided into two slopes, big and small, and some practice cars practice fixed-point climbing projects here. The reporter saw that many students have different degrees of "slipping" phenomenon. Mr. Wang told reporters that he put out many fires during his first practice.
Common problems of students: the fixed-point parking is not in place, the uphill flameout, and "rolling".
Correction: two aspects should be paid attention to when starting on a fixed slope. First of all, we must grasp the parking position. According to the regulations, the distance between the front bumper of the vehicle and the designated parking line shall not exceed 50cm, otherwise 20 points will be deducted in the exam; The distance from the right side to the sideline cannot exceed 30cm, otherwise 20 points will be deducted. So it is very important to choose the right time to stop. In order to prevent flameout when climbing, it is necessary to practice oil distribution and cooperation, and at the same time grasp the opportunity to release the hand brake, and continue to supply oil slowly after releasing the hand brake. The way to prevent "skidding" is to tighten the handbrake after parking at a fixed point.
Tandem parking
In the training ground of a driving school, there is a long line of vehicles waiting for practice in the driving range with side parking. Some students are very careful in operation, and eventually there will be a left (right) or rear exit of the vehicle.
Frequently asked questions: the timing of returning to the direction is not good.
Coach correction: First, find a suitable parking spot for side parking to prepare for the next operation of reversing into the warehouse. The next step is to turn the steering wheel in time and then turn it back in time. If you find the positive direction too late, the right car body will be out of alignment, and if you find the positive wheel too early, the left car body will be out of alignment. There is another situation, that is, when reversing, the rear body is easy to go out of bounds without paying attention to judging the position of the vehicle. In the process of completing full-side parking, you should also be witty and try to slow down.
Teacher Yang has just successfully passed the pile test and started the road test practice. When it comes to the right-angle turning project, Mr. Yang always has a small problem and can't finish it smoothly. "I'm always in a hurry when I turn right. I tried to turn left and right, but the car still couldn't pass the right turn smoothly. " Mr. Yang said.
Common fault: the driver didn't grasp the best time to drive, and the speed was too fast.
Coach correction: When the right side of Santana car body is close to the outer right-angle sideline, the middle of the left and right front door triangular windows is aligned with the inner and outer right-angle lines, and the direction is left, back and right to the end, the car with the right direction can pass smoothly.
Tips for driving test:
1. Arrange scientific and reasonable study time.
Some students like to concentrate on their studies in a short time, while others need a long time to learn the whole driving process. In fact, neither method is suitable. Generally speaking, it is not appropriate to concentrate too much time in the car, so there is no process of digesting and absorbing what you have learned. If you concentrate on practicing, the effect will not be very good. If you learn to drive for too long, it is not conducive to the consolidation of what you have learned. Learning this is easy to forget that. There is no gradual process. Therefore, students should pay attention to reasonable arrangement of time.
When taking a road test, fasten your seat belt before getting on the bus.
When you really enter the exam, many small details need students' special attention, otherwise it is very likely that you will "lose big because of small things" and you will not pass the exam smoothly. When taking a road test, the first thing to remember after getting on the bus is to fasten your seat belt first. Many students failed in the final exam because they didn't wear their seat belts during the exam. I didn't realize my mistake because I was nervous. In fact, when you get on the bus, you must have the consciousness of fastening your seat belt. Even if you successfully get a driver's license, you should pay attention to leaving the driving school and driving on the road.
3. Adjust the position of rearview mirror and seat.
Whether it is a pile test or a road test, you must adjust the rearview mirror and seat of the test drive to suit your position, so that you can clearly see the two sides and back corners of the car from the rearview mirror. The distance between the seat height and the steering wheel should also be adjusted to ensure that the road ahead can be clearly seen during the inspection and the vehicle can be effectively and correctly controlled.
4. Avoid slipping into neutral.
Pay special attention to the road test and avoid taxiing in neutral. After the vehicle stops, be sure to choose neutral.
Try not to wear high heels during exams and practice.
For girls, try not to wear high heels during exams and normal exercise. Because high heels will affect the driver's feeling of stepping on the accelerator, clutching and braking in the driving process to a certain extent, and ultimately affect the practice effect and test results.
Million car purchase subsidy