Jiangmen new house inspection skills?
1, look at the wall after the heavy rain. From time to time, the wall of the new house appears water seepage. Seriously, the walls under all the windows in the whole building are leaking. It is best to inspect the house before delivery and the day after heavy rain. At this time, if there are problems with the wall, it is almost inevitable. In addition to water seepage, it is whether there are cracks in the wall. Some netizens reported that there was a door-type crack in his house, and later it was known that it was the elevator cargo port left during construction, which left a future trouble because of the hasty sealing and repair treatment in the later period.
2. Check whether the wires are normal. When testing wires, besides seeing whether the wires are charged, it is mainly to see whether the wires meet the national standard quality, and then to see whether the cross-sectional area of the wires meets the requirements. Generally, the wires in the home should not be less than 2.5 square millimeters, and the wires in the air conditioner should reach 4 square millimeters. Otherwise, when using the air conditioner, it is easy to overheat and soften.
3. Check whether the kitchen and bathroom are waterproof or not. As key waterproof rooms, the kitchen and bathroom were already waterproof when delivered by the developer. Before the decoration, cement mortar should be used as a sill to block the toilet door, then plastic bags should be used to cover the sewage outlet, then tied tightly, and then water should be discharged from the toilet, about 2 cm high. Then make an appointment with the owner downstairs to check the ceiling of his bathroom for signs of water leakage after 24 hours.
How to accept a new house?
1, check whether the sewage pipe is unblocked.
The sewage pipe here refers to the sewage outlet such as balcony. At the time of acceptance, take a water container in advance, and then pour water into the sewage outlet to see if the water flow is smooth. Because in the process of engineering construction, some workers will pour some cement slag into the drainage pipe to flow away. If the cement is sticky, it will block at the elbow, which will make drainage difficult.
2. Check the indoor horizon for errors.
Checking the horizontal line is to measure the horizontal error between the indoor floor farthest from the door and the floor inside the door. Go to the hardware store to buy a small transparent water pipe, about 20 meters long, and then fill it with water. Draw a sign at the entrance of 0.5m or 1m above the ground, and adjust the water level of the water pipe to the height of this sign.
3. Check whether the floor is up to standard.
The method of checking height is simple. Measure a ruler along the inner corners of two walls. You should measure many places in the room. Generally speaking, about 2.65 meters is an acceptable range. If the house is less than 2.6 meters, then the house will be reconsidered.
When we follow Bian Xiao's house inspection skills for Jiangmen's new house? After learning the knowledge of how to accept new houses, we suddenly realized that people who buy houses in various regions are learning the knowledge of buying houses and inspecting houses. As we all know, only by mastering it can it be better applied to practice. I hope the above series of knowledge introduction can help everyone.