The specific steps are as follows:
1. Take out the wheel bolt wrench and traction ring from the kit in the trunk.
2. Carefully pry open the plastic cover from the front bumper cover and screw the traction ring clockwise into the threaded hole by hand.
Figure-Tighten the front traction ring
3. Insert the wheel bolt wrench into the traction ring and tighten the traction ring.
Special attention should be paid to:
● Inexperienced drivers should not try to tow other vehicles to prevent accidents.
● The traction ring must be firmly screwed into the threaded hole, otherwise the traction ring may slip out of the threaded hole during traction.
After the traction is completed, remove the traction ring in the reverse order of the above contents, and tighten the protective cover.
● The driver of the towed vehicle must turn on the danger warning light and abide by relevant local laws and regulations.
● When towing, put the shift handle in the "N" position.
● Ensure that the traction rope is always under tension.
● The traction ring must be carried with the vehicle.
● Remember that the brake booster and power steering mechanism of the towed vehicle do not work when towing! So brake in advance, but gently step on the brake pedal.