What are the design requirements for wooden case packaging?

The packing in wooden cases should meet the requirements of science, economy, firmness, beauty and marketability. Under normal storage, transportation, loading and unloading conditions, the products shall be guaranteed not to rust, damage or lose due to poor packing in wooden cases for at least one year from the delivery date of the manufacturer. Special requirements shall be implemented according to the agreement between the buyer and the wooden box factory. On the premise of pursuing environmental protection, the design of wooden cases in Baoding mostly considers the traditional functions of wooden cases, that is, safe and convenient transportation, developing new highlights, such as convenient transportation, convenient disassembly, repeated use, saving volume and reducing packaging costs. Generally speaking, the wooden case packaging chain provides high-quality wooden case packaging design scheme and high-quality wooden case packaging method. The internal dimensions of the length and width of the frame wooden case shall be ensured to be 50 8 mm larger than the maximum length and width dimensions of the packaged product respectively, and the internal dimensions of the height shall be ensured to be 50 8 mm larger than the maximum height dimension of the packaged product. For wooden box beams that cannot be stacked during storage and transportation, the cross-sectional dimensions are shown in Table 2. Only two beams of this cross-sectional size are needed, which are respectively placed at the positions where the steel wire rope may pass, and small beams with cross-sectional area not less than 1/3 are respectively arranged at about 200 mm around each beam. ..