Digital experts moisten the soil
Number of people receiving services
2 1
The response time is 10 minute.
Ask a question
Or 1, check whether the water suction motor is faulty.
After turning on the key switch, press the water suction switch of the washing machine. If it is turned on, you can hear the sound of the contactor. If the suction motor doesn't work, it means that the suction motor of the washing machine is broken, or worse.
2. Is there any fault in the contactor of the washing machine?
Turn on the switch of the water suction motor, and there is no "bang" sound in the contactor. There is probably something wrong with the contactor. We can directly measure whether there is electricity in two columns of contactors with a multimeter. If one train has electricity and the other train has no electricity, it means that the contactor is broken. Just replace the contactor.
3. Is the fuse broken?
Open the fuse box, pull out the fuse and see if the fuse is blown. If it burns out, blow out the fuse.
4. See if the suction motor switch is applauded.
Use multimeter to measure whether the switch of water suction motor is damaged. If it is broken, replace it.
The consultation record was answered in June 2022-1 1.
Ten thousand mole washing machine shows that d0 can't work.
Kissing? Hello! This is more common! There are several possible solutions when the main power supply of the machine is not connected: Connect 2/5 of the main power supply. The electric lock is not opened or damaged. Solution: Turn on or replace the key switch. The terminals of 3/5 batteries have copper rust. Solution: Clean the copper rust at the terminal. 4/5 battery wiring is disconnected. Solution: Reconnect 5/5 batteries damaged. Solution: Replace the battery.
Or 1. Check whether the suction motor is faulty. After turning on the key switch, press the water suction switch of the washing machine. If it is turned on, you can hear the sound of the contactor, indicating that the water suction motor of the washing machine is broken or worse. 2. Is there anything wrong with the contactor of the washer? Turn on the switch of water suction motor, but I didn't hear the contactor ring. There is probably something wrong with the contactor. We can directly measure whether the two pillars of the contactor have electricity with a multimeter. If one pole has electricity and the other pole has no electricity, it means that the contactor is broken and we can replace it. 3, whether the fuse is broken, open the fuse box, pull out the insurance, see if the insurance is burnt out, if it is burnt out, it will directly worsen the insurance. 4. See if the suction motor switch is applauded. Use a multimeter to measure whether the suction motor switch is damaged. If it is broken, replace it.