How to Disassemble and Assemble Laiquan Fast Water Purifier

All products are installed in the same way, including pre-filtration and fine filtration, and should be installed under the cabinet. Those without cabinets need to drill holes in the wall with an impact drill. The general products are tap water or the previous faucet, which is used to wash vegetables and brush, and then a hose is installed for the water purifier. This faucet can borrow the hole of soap dispenser, otherwise it needs to be re-drilled and installed. The front end of the pre-filter needs to be connected to the original water pipe and the original faucet water pipe with a tee. The output end of the water purifier pipe is connected to the pe pipe and the front end of the pre-filter. The output end of the pre-filter is connected to the input end of the fine filter, and the output end of the fine filter is connected to the faucet. Pay attention to the installation direction of the filter cartridge when installing, and be sure not to install it backwards. Flush the pipeline after water is supplied, and the faucet of the water purifier can be used in five or six minutes.