I. Registration system
Article 1 In order to standardize the registration management of Grade II construction engineers in Guizhou Province, these implementation measures are formulated in accordance with the Administrative Licensing Law of People's Republic of China (PRC) and the Regulations on the Administration of Registered Construction Engineers (Order No.20). Ministry of Construction 153) and other laws, regulations and rules.
Article 2 These Measures shall apply to the registration, supervision and administration of two construction division.
Article 3 The Construction Department of Guizhou Province (hereinafter referred to as the Provincial Construction Department) is the second-level construction engineer registration management institution, responsible for the examination and approval and daily management of the second-level construction engineer registration.
Second, the application for registration
Article 4 Before applying for registration, the applicant must be employed by a unit with one or more qualifications of construction, survey, design, supervision, bidding agency and cost consultation, and sign an employment contract with the practicing unit according to law. The applicant shall, in accordance with the requirements of the Catalogue of Application Materials for the Registration of Secondary Construction Engineers, truthfully provide relevant application materials to the employing unit and be responsible for the authenticity of its contents, and apply for registration to the Provincial Construction Department through the employing unit.
Article 5 The application for registration shall be made by combining online declaration and written declaration. Applicants should fill in the form on the website of the Construction Department of Guizhou Province (website: //www.gzjs.gov.cn), and an application form to be printed will be automatically generated after the online application is successful.
Article 6 Registration is divided into initial registration, renewal registration, change registration, new registration, cancellation registration and re-registration.
If the registration certificate and practicing seal are lost or defaced, the registered architect may apply for a replacement or renewal.
Article 7 Initial registration
Within 3 years from the date of issuance of the qualification certificate, the applicant may apply for initial registration.
Overdue applicants should provide the corresponding professional continuing education certificate, and the learning content should comply with the relevant provisions of the Ministry of Construction and the Provincial Department of Construction on the continuing education of secondary construction engineers.
The initial registration is valid for 3 years.
When applying for initial registration, the applicant shall submit the following materials:
(1) application form for initial registration of second-level constructor (attached table1);
(two) qualification certificate, academic certificate and identity certificate;
(three) the employment contract signed by the applicant and the employing unit;
(four) overdue application for initial registration, it shall provide proof materials that meet the requirements of continuing education.
The above application materials are all originals and photocopies (A4 paper), and the parts (2), (3) and (4) (photocopies) are bound as attachment materials, and the application form is not bound with attachment materials.
The employer will submit the application summary of the second-level construction engineer registration (Table 2) and the applicant's application form and material attachments to the Provincial Construction Department.
Article 8 Renewal of registration
If it is necessary to continue practicing after the expiration of the registration period, it shall apply for renewal of registration in accordance with the provisions of the Regulations on the Administration of Registered Architects 30 days before the expiration of the registration period. The renewal of registration is valid for 3 years.
To apply for renewal of registration, the applicant shall submit the following materials:
(1) Application Form for Registration Renewal of Class II Architect (Annex 5)
(2) Registration certificate and practicing seal;
(three) the employment contract signed by the applicant and the employing unit;
(four) the applicant meets the requirements of continuing education within the validity period of registration.
The application form and the number of copies of materials shall be handled according to the initial registration requirements.
The renewal of registration in the registration certificate shall be stamped with the seal of the Provincial Construction Department.
Article 9 Change of registration
Within the validity period of registration, in any of the following circumstances, it shall apply for change of registration in time. After the change of registration, the validity period of the original registration certificate remains unchanged.
1, change the internship unit;
2. The name of the practicing unit changes;
3. The name of the registered architect changes;
4. Other matters that need to be changed in registration occur.
To apply for registration of change, the applicant shall submit the following materials:
(1) Application Form for Change of Registration of Class II Construction Engineer (Annex 6);
(2) The original registration certificate and practicing seal;
(three) to change the practice unit, it shall provide the employment contract signed by the applicant and the new employer and the certificate of work change (the termination of the employment contract with the original employer and the retirement certificate of the retirees);
(4) If the name of the applicant's practice unit changes, it shall provide the notice of approval of the industrial and commercial department and the business license of the enterprise as a legal person before and after the change.
(five) if the name of the registered construction engineer changes, it shall provide the changed identity card or the identity certificate issued by the household registration management department of the public security organ.
The number of application materials provided according to the initial registration requirements.
Article 10 Registration of Supplementary Items
A registered architect who has obtained the corresponding professional qualification certificate may apply for additional registration. Late applicants are required to provide proof of all continuing education hours during the latest registration period of this major. After the additional registration is granted, the validity period of the original professional registration remains unchanged.
To apply for additional registration, the applicant shall submit the following materials:
(1) application form for registration of additional projects of secondary constructor (Annex 7);
(2) Professional qualification certificate;
(three) additional professional continuing education requirements of the certification materials;
(four) the original registration certificate and practicing seal.
The application form and the number of copies of materials shall be handled according to the initial registration requirements.
Additional items are registered on the inner page of the registration certificate and sealed by the Provincial Construction Department.
Article 11 Cancellation of registration
Two construction division has one of the circumstances listed in article seventeenth of these measures, and the cancellation procedures shall be handled by the Provincial Construction Department.
The applicant or his practice unit shall provide the following materials:
(1) Application Form for Cancellation of Registration of Class II Construction Engineer (Annex 5);
(2) Practice qualification certificate;
(3) Proof that it meets one of the circumstances listed in Article 17 of these Measures.
The Provincial Department of Construction shall complete the cancellation of registration within 5 working days, and at the same time withdraw the registration certificate and practicing seal or declare the registration certificate and practicing seal invalid.
Article 12 Re-registration
If the second-level constructor cancels the registration or refuses to register, he may apply for re-registration after meeting the registration conditions again. Re-registration shall be handled according to the initial registration procedure, and the study certificates of all continuing education hours in the latest registration period of this major shall be provided.
To apply for re-registration, the applicant shall submit the following materials:
(1) Application Form for Re-registration of Class II Construction Engineer (Attached Table 8);
(two) qualification certificate, academic certificate and identity certificate;
(three) the employment contract signed by the applicant and the employing unit;
(four) certification materials that meet the requirements of continuing education.
The application form and the number of copies of materials shall be handled according to the initial registration requirements.
Thirteenth registration certificate, practice seal lost replacement.
If the registration certificate and practicing seal are lost, the registered construction engineer shall submit the following materials and apply to the Provincial Construction Department for a replacement.
(a) the application form for the replacement of the registration certificate and practicing seal of the second-level constructor (Table 9);
(2) identification;
(3) Loss statement published in newspapers at or above the provincial level.
Fourteenth registration certificate, practicing seal defaced, registered construction engineer can apply to the provincial construction department for a replacement. The Provincial Construction Department shall complete the replacement procedures within 20 working days, and recover the original registration certificate and practicing seal.
Fifteenth secondary construction engineer can apply for registration in the following six professional categories:
Construction engineering, highway engineering, water conservancy and hydropower engineering, municipal public works, mining engineering, electromechanical engineering.
If the major indicated in the qualification certificate is housing construction engineering or decoration engineering, it shall apply for registration according to the major of construction engineering; If the major indicated in the qualification certificate is mining engineering, apply for registration according to the major of mining engineering; If the major indicated in the qualification certificate is smelting engineering, you can sign up for a major in mining engineering or electromechanical engineering; If the major indicated in the qualification certificate is power engineering, petrochemical engineering and electromechanical installation engineering, it will be registered as electromechanical engineering.
Three. Acceptance and approval
Article 16 The Provincial Department of Construction shall accept and approve the application for registration of second-level construction engineer in accordance with the Measures for the Implementation of the Administrative License of the Ministry of Construction (J&F [2004]11No.).
Article 17 The Provincial Department of Construction shall check the completeness of the materials provided by the registration applicant and the validity of the relevant originals in accordance with the requirements of the Catalogue of Application Materials for Registration of Second-level Construction Engineers on initial registration, renewal registration, change registration, additional registration, re-registration, replacement and cancellation of registration. If there are errors in the application materials that can be corrected on the spot, the applicant is allowed to correct them on the spot. If the application materials do not meet the requirements, the applicant shall be informed at one time and a notice of notification shall be issued.
In any of the following circumstances, the applicant shall not accept or register:
(a) does not have full capacity for civil conduct;
(2) applying for registration in two or more units;
(three) does not meet the requirements of continuing education of registered architects;
(four) subject to criminal punishment, has not yet been completed;
(5) Being subjected to criminal punishment for practicing activities, and less than 5 years have passed since the date of completion of the execution of criminal punishment and the date of application for registration;
(6) Having been subjected to criminal punishment for reasons other than those mentioned in the preceding paragraph, and less than three years have passed from the date of the decision on punishment to the date of applying for registration;
(seven) the registration certificate has been revoked, and it has been less than 2 years since the date of punishment decision to the date of application for registration;
(eight) in the three years before the date of applying for registration as a project manager, a major quality and safety accident occurred in the project in charge;
(9) The employer of the applicant does not meet the requirements of the registered unit;
(10) Over 65 years of age;
(eleven) other circumstances that laws and regulations do not allow registration.
Article 18 Where the Provincial Construction Department applies for initial registration, re-registration, additional registration or cancellation of registration, it shall verify the applicant's repeated registration declaration within 10 days from the date of accepting the application, and review whether the applicant meets the registration conditions and the compliance of the application materials within 20 days after verification. Provincial Construction Department will publicize the audit opinions to the public 10 days. If there is no objection after publicity, the Provincial Construction Department shall make a written conclusion of examination and approval within 5 days, and announce the examination and approval results to the public.
The Provincial Department of Construction shall, within 5 days from the date of accepting the application, review whether the applicant meets the registration conditions and the compliance of the application materials when applying for renewal of registration, change of registration, replacement and replacement. The provincial construction department will publicize the audit results after summarizing 10 days. If there is no objection after publicity, the Provincial Construction Department shall make a written conclusion of examination and approval within 5 days, and announce the examination and approval results to the public.
Four. Registration certificate and practicing seal
Article 19
(1) registration certificate
The registration certificate adopts the unified style of the Ministry of Construction "People's Republic of China (PRC) National Secondary Construction Engineer Registration Certificate", which is uniformly printed by the Provincial Construction Department.
1. The registration certificate number consists of 13 digits. The meaning of each group of numbers of the registration code is:
(1), the first Chinese character is the abbreviation of Guizhou Province, "Qian";
(2), the second said registered construction engineer level, the first level is 1, the second level is 2;
(3) The third and fourth digits indicate the area code of the enterprise employed at the time of registration, such as "5 1" in Guiyang and "52" in Zunyi;
(4) The fifth and sixth digits indicate the year when the qualification certificate was obtained. Qualification certificate obtained in 2005, marked as "05";
(5) The 7th and 8th digits indicate the year of initial registration, and those registered in 2007 are "07";
(6) The number 9- 13 indicates the provincial registration serial number when the applicant initially registered. For example, the number 1 means "0000 1".
For example: Qian 25 105070000 1, which means that the registered architect is registered in Guiyang, with grade II, and obtained the qualification certificate in 2005. The first registration year was 2007, and the serial number was 0000 1.
2. After registration, the registration number cannot be changed. If the registration is renewed, changed or re-registered, the third and fourth digits of the number will change with the change of the registered city (state, place), and the digital number will still use the number at the time of initial registration.
3. The registration number of the registration certificate is the same as the practicing seal.
(two) the practice seal style is the unified style of the Ministry of construction.
1, the specific style is as follows:
2. The seal is in the form of concentric double ellipse. The specifications are: the major axis of the outer circle is 50mm, the minor axis is 36mm, the major axis of the inner circle is 36mm, and the minor axis is 22 mm The stamp color is dark blue.
3. The practicing seal shall be made according to the specifications and format of the sample seal, and marked in turn:
(1) "Professional Seal of People's Republic of China (PRC) * * * and People's Republic of China (PRC) Secondary Construction Engineer", in Song typeface, with a word height of 4 mm;
(2) The name of the seal holder, in Chinese official script, with a word height of 4 mm;
(3) Registration number and seal check code, in song typeface, 3.5mm in word height;
(4) Registered major, Song Ti, with a word height of 3 mm;
(5) The expiration date of the practicing seal is 2.5mm in terms of song style and word height;
(6) Name of the employing enterprise, in Song style, with a word height of 4 mm. 。
4. In "Qian 25 105070000 1(02)", "Qian 25 10507000 1" is the registration number, and 02 is the signature check code.
5. "20 10.09.07" in the sample stamp indicates that the effective deadline of the seal is 20 19.7.
6. Practice seal verification code
The signature check code consists of two Arabic numerals, indicating the cumulative number of reissues after the signature is lost and invalidated. At the time of initial registration, the check code is 00, 1 time is 0 1, and the maximum number of times is 99.
7. Registered professional abbreviations
Architectural engineering specialty is referred to as "architecture"; Highway engineering specialty is referred to as "highway" for short; Water conservancy and hydropower engineering specialty is referred to as "water conservancy"; Mining engineering specialty is referred to as "mining"; Mechanical and electrical engineering specialty is referred to as "electromechanical"; Municipal public works specialty is referred to as "municipal"; The abbreviations of various majors are connected by a pause, indicating that there are multiple registered majors, such as "Architecture and Highway" indicating architectural engineering and highway engineering.
(3) The registration certificate and practicing seal of Grade II constructor are valid for 3 years.
(four) the Provincial Department of Construction shall, within 20 working days from the date of announcement, issue the registration certificate of People's Republic of China (PRC) National Class II Construction Engineer and the practicing seal of Class II Construction Engineer to the applicant who has been granted registration.
Verb (short for verb) others
Twentieth secondary construction engineer after registration, when receiving the registration certificate and practicing seal, it should also return the original qualification certificates of project managers at all levels to the Provincial Construction Department.
For more information about project/service/procurement bidding, and to improve the winning rate, please click on the bottom of official website Customer Service for free consultation:/#/? source=bdzd