Most indicators fall into four categories:
(1) The bright red indicator light represents a warning, so you should stop driving first and carry out maintenance.
(2) The light yellow indicator light warns the car buyers to deal with the matching problem as soon as possible.
(3) The dark blue indicator suggests that car buyers should pay attention to hazards, such as whether turning on the high beam will lead to glare of the opposite car.
(4) Emerald indicators are multifunctional lighting effects, such as proximity lights, width indicators and direction indicators.
The following is a detailed description of mercedes benz c-class indicator light (serial number matching diagram).
4. Clean the level gauge
The indicator light is on, which means it's time to add cleaning liquid to the window or headlight cleaning equipment.
5, brake system friction plate
It means that the friction plate is seriously damaged and invalid. It must be noted that the friction plates on one shaft should be removed and replaced together.
19, steering lock system software
There is a functional problem in the steering system of the car, and the car can't turn at this time. At the same time, there is no need for a trailer, which has the risk of safety accidents.
2 1, tire inflation working pressure video monitoring system
No matter whether the working pressure of the tire is high or low, this fault light will light up. Naturally, it is possible that the information content was not recorded again after the tire change.
3 1, electric pedal parking brake
Monitor whether the brake is in place in time, and the indicator light goes out after the brake is released. If the indicator light keeps flashing, it means that the brakes are not in place in time.
32, battery power consumption
The battery is too low, you can try to charge it again. If the light doesn't fade, you should repair it on time.
48, refrigeration system
In addition to the lack of refrigerant, it is also possible that the fan is out of order.
49. Anti-lock braking system
When the ABS fault light is on, the anti-lock braking system is invalid or invalid. When the electronic differential system fails, it will also cause the fault light to light up. At this time, stepping on the brake pedal quickly is likely to lead to uncontrollable personal behaviors such as sideslip.
53. Total gasoline and diesel oil
When the mark lights up for the first time, it means that there are about 8L left in gasoline and diesel. If there is a problem with the gasoline and diesel system software, it will also cause the fault light to light up.
57. Engine oil quantity
One is that the oil pressure is too low, and the other is that the oil level of the car is not enough.
60, motor control driving smooth system software (ESP)
Everything flashes during normal operation, lights up when it fails, and lights up when it is closed. At this time, extreme practice is likely to cause risks such as drift.
62, organic waste gas video monitoring system
It may be that the automobile engine failure leads to insufficient ignition and fails to meet the environmental protection standards in China.