Aurora copier failure co2 1 1

The failure CO2 1 1 of Aurora copier refers to a common failure code of this type of copier in operation. This code is usually accompanied by some information on the display screen, such as "error code CO2 1 1", "ink absorber failure", "ink cartridge lost" and so on. Its appearance may cause the copier to fail to work normally, and it is impossible to copy or print documents. Next, let's introduce the cause and solution of this fault.

1. Ink cartridge problem. The failure of CO2 1 1 is often related to the ink cartridge in the copier. If the ink cartridge is not installed correctly or the toner is not replenished, it is likely to cause failure.

Solution: Check whether the ink cartridge is installed correctly. If necessary, you can try to open it and reinstall or replace the broken ink cartridge.

2. Toner cartridge problem. If the machine detects that the toner cartridge is insufficient, the failure of CO2 1 1 will occur.

Solution: Check whether the toner in the toner cartridge is too low or exhausted. If it is, it needs to be supplemented.

The ink absorber is out of order. The ink absorber is located in the so-called "cartridge holder" in the copier and is used to clean the ink in the ink cartridge. Failure of this component will lead to failure of CO2 1 1.

Solution: refer to the instruction manual, turn on the copier and determine whether the ink absorption device can be cleaned or reset. If you can't solve the problem, you can contact the maintenance personnel for further treatment.

In a word, the above are the main reasons and several solutions of "CO2 1 1 failure of Aurora copier". Remember, please read the instructions carefully before trying any corrective measures to avoid causing more damage or damage.

If you need further help, you can also contact the manufacturer or the after-sales service department to ask related questions.