Architectural design: The computer room must have a dust-proof, moisture-proof, lightning-proof, anti-static, flame-retardant, insulation, heat insulation and noise reduction physical environment, complete anti-theft facilities to avoid the interference of strong magnetic fields, and be located in the middle floor of the building for easy management and wiring. Avoid being located on the top floor, basement and the lower floor of water equipment.
Floor selection: it is best to choose the location of the central computer room on the second or third floor of the whole building. This helps to prevent moisture and water, to carry large equipment, and to protect safety. At the same time, due to the high equipment density in the computer room, minicomputers, servers and large storage devices are often placed in a centralized way, so the bearing capacity of the floor where the center is located needs special design, and its bearing capacity should meet the relevant requirements.
Door and window design: In order to reduce the heat exchange between the computer room and the surrounding environment, the important equipment and buildings with high heat value in the core area can be kept without windows and other passages, so that the computer room is in a relatively closed space. When the system is running normally, the ventilation system in the central computer room makes the interior of the computer room in a relatively positive pressure environment, which is beneficial to dust prevention and moisture prevention. Pay attention to the size of the largest equipment in the central computer room scheme, and design the width of doors and other passages accordingly.
Computer room decoration: the indoor decoration works of the central computer room mainly include: ceiling, partition wall, doors, windows, wall decoration, ground, raised floor, etc. According to the specific situation of the computer room, the layout should be reasonable, and the entrance and exit of integrated wiring should be reserved. In order to prevent dust and save energy, windowless structure is usually adopted. The raised floor should have a suitable overhead height to provide enough space for various pipelines. Decorative materials should have good fire resistance to ensure fire safety.
The above information is for reference only. For more accurate information, please consult Bai Rui.