A registered surveyor has passed the exam. If you want to take the consulting engineer exam, can you be exempted from taking 2 courses?
The
A registered surveyor has passed the exam. If you want to take the consulting engineer exam, can you be exempted from taking 2 courses?
The "qualification certificate of engineering technology" mentioned in Item (2) of Article 6 of the Implementation Measures refers to the qualification certificate of engineering technology established by the People's Armed Forces Department in conjunction with relevant business departments, including first-class architects, first-class builders, electrical engineers, first-class structural engineers, urban planners, cost engineers, supervision engineers, equipment supervisors, tenderers and investment and construction project managers.
Those who have obtained the above qualification certificate and have been engaged in engineering consulting business for 8 years can be exempted from taking part in some subjects and only take the exams of "Project Decision Analysis and Evaluation" and "Modern Consulting Methods and Practices". Surveying and mapping division should belong to, but it depends on the registration announcement of each province. If you have a degree in Beijing, you can also be exempted from the test. This information comes from Luyou Education.
What are the conditions for cost engineers to be exempted from examination?
Before the Interim Provisions on the Qualification System of Cost Engineers (1996) No.77 was issued (that is, before the end of1996), those who have been employed in senior professional and technical positions and meet one of the following conditions may be exempted from the two subjects of "Related Knowledge of Engineering Cost Management" and "Construction Engineering Technology and Measurement":
(1) 1970 (inclusive) Graduated from engineering or engineering economics, and worked in engineering cost business for 15 years.
(2) Graduated from engineering or engineering economics before 1970 (inclusive) and engaged in engineering cost business for 20 years.
(3) 1970 (inclusive) has obtained technical secondary school education in engineering or engineering economics, and has been engaged in engineering cost business for 25 years.
Conditions for Cost Engineer's Application (Unified Examination)
China citizens who abide by the law and meet one of the following conditions may apply to take the qualification examination for cost engineers:
1, engaged in engineering cost business for 5 years after graduation from engineering cost college; After graduating from engineering or engineering economics, I have been engaged in engineering cost business for 6 years.
2. Bachelor degree in engineering cost, engaged in engineering cost business for 4 years; After graduating from engineering or engineering economics, he has been engaged in engineering cost business for 5 years.
3. After graduating from the second bachelor's degree or postgraduate class in the above major and obtaining a master's degree, he has been engaged in engineering cost business for 3 years.
4. After obtaining the above-mentioned professional doctorate, he has been engaged in engineering cost business for 2 years.
(2) Extended reading for the condition of exemption for surveyors:
According to the requirements of the application conditions, in addition to the engineering cost major, the major that meets the application conditions is engineering or engineering economics. So what major belongs to engineering or engineering economics? Compiled the current "Comparative Table of New and Old Specialty in Undergraduate Specialty Catalogue of Ordinary Colleges and Universities" by the Ministry of Education.
* * * involves 45 majors in 18 category, including "civil engineering, surveying and mapping, water conservancy, transportation, energy and power, geology and minerals, materials, electrical information, machinery, management science and engineering, bioengineering, chemical engineering and pharmacy, and engineering mechanics", among which 100 major is in this major and there are 9 similar majors.
1, divided into first-class cost engineers and second-class cost engineers.
The professional qualification certificate of cost engineer (Grade I) is valid nationwide.
The professional qualification certificate of cost engineer (Grade II) is valid in the administrative area in principle.
2. Professional title appraisal
Professional and technical personnel have obtained the professional qualifications of first-class cost engineer and second-class cost engineer, which can be recognized as having the title of engineer and assistant engineer, and can be used as a condition to declare a higher-level title.
3. Add two majors: traffic engineering and water conservancy engineering.
The Ministry of Housing and Urban-Rural Development is responsible for civil engineering and installation; The transportation engineering major is the responsibility of the Ministry of Transport; The Ministry of Water Resources is responsible for water conservancy engineering. Candidates can choose one according to the actual work needs when registering.
4. Examination arrangement
The national unified outline, unified proposition and unified organization examination system shall be implemented for the professional qualification of first-class cost engineers; The national unified outline shall be implemented for the professional qualification of Grade II cost engineers, and the examination system shall be independently put forward and organized by all provinces, autonomous regions and municipalities directly under the Central Government.
The first-class cost engineer professional qualification examination is held once a year, and the examination results are managed in a rolling way, with a cycle of 4 years.
Secondary cost engineer occupation qualification examination not less than once a year, the specific examination date is determined by all localities; The assessment results are managed in a rolling way, with a period of two years.
5. Registration and practice
Implement the management system of registered practice. Personnel who have obtained the professional qualification certificate of cost engineer and engaged in engineering cost-related work can engage in engineering cost work in the name of registered cost engineer after registration.
A registered cost engineer should hold a registration certificate and a practicing seal when practicing.
Scope of practice: first-class registered cost engineer, including project cost management and consultation in the whole process of construction projects; The second-class registered cost engineer assists the first-class registered cost engineer to carry out related work and can independently carry out specific work.
6. The effectiveness of the certificate obtained before remains unchanged.
Before the promulgation of these Provisions, the qualification certificates of national construction project cost personnel, highway and water transport project cost personnel and water conservancy project cost engineers have the same effect.
(3) Are individual subjects valid? Validity period of registered surveyor qualification examination results.
According to Article 4 of the Implementation Measures for the Qualification Examination of Registered Surveyors, those who take all (3) subject examinations of the qualification edition of registered surveyors must take all (3) subject examinations and pass them within one examination year before they can obtain the qualification certificate of registered surveyors.
According to Article 5 of the Measures for the Implementation of registered surveyors Qualification Examination, those who met the registration requirements of registered surveyors Qualification Examination before June 5438+February 3/KLOC-0, 2005 and were rated as professional and technical positions of senior engineers can be exempted from the comprehensive ability of surveying and mapping, and only take the examination of surveying and mapping management and laws and regulations and surveying and mapping case analysis. In an examination year, only by passing the above two subjects can you obtain the qualification certificate of registered surveyor. On this basis, the examination results of registered surveyors are managed without rolling. You must pass all three subjects or the other two subjects at one time to obtain the qualification certificate of registered surveyor.
"Boss" registered surveyor has passed the exam and wants to take the consulting engineer exam. Can it be exempted?
The following are the exemption conditions for consulting engineers:
Candidates who meet the exemption conditions will only take the exams of Project Decision Analysis and Evaluation and Modern Consulting Method and Practice. The assessment results are managed in a rolling way, with a period of two years. Candidates can obtain the professional qualification certificate of consulting engineer (investment) by passing the subject examination for two consecutive examination years.
First, the "main finisher" of the award-winning project mentioned in Item (1) of Article 6 of the Implementation Measures refers to the person who is included in the national excellent engineering design and excellent engineering survey gold and silver selected by China Engineering Consulting Association and attached with the award certificate or award list.
The above-mentioned personnel can be exempted from taking part in some subjects and only take the exams of "Project Decision Analysis and Evaluation" and "Modern Consulting Method and Practice".
2. The "qualification certificate of engineering technology" mentioned in Item (2) of Article 6 of the Implementation Measures refers to the qualification certificate of engineering technology established by Ministry of Human Resources and Social Security in conjunction with relevant competent departments, including: first-class architect, first-class constructor, electrical engineer, first-class structural engineer, urban planner, cost engineer, supervision engineer, equipment supervisor, tenderer and investment construction project manager.
Those who have obtained the above qualification certificate and have been engaged in engineering consulting business for 8 years can be exempted from taking part in some subjects and only take the exams of "Project Decision Analysis and Evaluation" and "Modern Consulting Methods and Practices".
Wu's education is not full-time. Can I take the registered surveyor exam?
As long as the academic qualifications are recognized by the state, you can take the exam whether you are full-time or on-the-job.
According to the qualification examination of registered surveyors issued by China Personnel Examination Network and the announcement of 20 18 registered surveyors examination issued by various provinces, the conditions for applying for 20 18 registered surveyors are still divided into general examination conditions and exemption examination conditions. General inspection conditions are as follows:
(a) China citizens who abide by national laws and regulations, abide by professional ethics, and meet one of the following conditions may apply to take the qualification examination for registered surveyors:
1, obtained a junior college degree in surveying and mapping, and worked in surveying and mapping business for 6 years. What if you don't have enough education?
2. Obtain a bachelor's degree in surveying and mapping, and have been engaged in surveying and mapping business for 4 years.
3. Obtained a double bachelor's degree including surveying and mapping major or graduated from the postgraduate class of surveying and mapping major, and engaged in surveying and mapping business for 3 years.
4. Obtain a master's degree in surveying and mapping, and have been engaged in surveying and mapping business for 2 years.
5. Obtained a doctor's degree in surveying and mapping, engaged in surveying and mapping business 1 year.
6 to obtain other professional degrees or degrees in science and engineering, engaged in surveying and mapping business increased by 2 years.
Conditions for Exempting Foreign Languages from Examinations with the Title "Lu"
1. Returned students who have obtained a master's degree or above recognized by the national education administrative department;
2. Those who have passed the National Foreign Language Proficiency Test (WSK) or the National Foreign Language Proficiency Test (BFT) organized by the state and have been a visiting scholar or trained abroad for more than one year;
3. When applying for the qualification of deputy senior professional and technical positions, the scores of foreign language test for professional titles have reached the national general standard or obtained a certificate of conformity, and those who need to take the same level test again when applying for senior positions;
4. Persons who independently publish foreign monographs and translations;
5. Persons who have obtained doctoral degrees;
6. Young and middle-aged experts who are selected as national candidates for the "Hundred Million Talents Project" and enjoy the special allowance of the State Council or the province, and have made outstanding contributions to the country or the province;
7. He has won more than the third prize of science and technology award, teaching achievement award and social science achievement award at or above the provincial level since he took up his present job, and has at least one main finisher, or an independent finisher or the first finisher who has obtained more than two national patents (including at least one invention patent);
8. Personnel engaged in professional and technical work with China characteristics and national traditions, such as clinical Chinese medicine (limited to doctors and pharmacists), ethnic medicine (limited to doctors and pharmacists), arts and crafts, ancient books collation, and archaeology in historical period;
9. Those who have obtained a college degree or above in foreign language major and are engaged in foreign language professional work have a second foreign language requirement for applying for professional and technical post qualifications;
10, the personnel who declare the qualifications of various series of junior professional and technical posts;
1 1, * * *, personnel who have been sent to Xinjiang or have been sent to work abroad for more than one year, and apply for professional and technical post qualifications during their work in Xinjiang or abroad. 1, engaged in professional and technical work in grass-roots units below the township level, and declared the qualifications for deputy senior and intermediate professional and technical positions;
2. Those who have been engaged in agriculture, forestry, water conservancy, mining, surveying and mapping, exploration, railway construction, highway construction and other professional and technical work in the field for more than 15 years, or who have worked in the field for more than 10 years, apply for the qualification of deputy senior professional and technical positions;
3. Those who have reached the age of 50 and have been engaged in professional and technical work 15 years or more apply for the qualification of deputy senior professional and technical posts or those who have been engaged in professional and technical work 10 years or more apply for the qualification of intermediate professional and technical posts.
Canadian registered surveyors want to register in China. What are the exemption items, or do they need to take the exam from scratch?
Interim Provisions on the System of Registered Surveyors
Chapter VI Supplementary Provisions
Article 39
………………
Measures for the administration of foreign professionals' application for taking the registered surveyors Qualification Examination, application for registration and practice shall be formulated separately.
Are there any exemption subjects in the registration conditions of registered surveyors?
There are no exemption subjects.
According to the spirit of the document notice issued by the Ministry of Personnel and the General Administration of Quality Supervision, Inspection and Quarantine (No.40 [2006] of the People's Republic of China) on printing and distributing the Interim Provisions on the System of Registered Metrologists, the Implementation Measures for the Qualification Examination of Registered Metrologists, and the Determination Measures for the Qualification Examination of Registered Metrologists, registered metrologists will be given a unified national examination from 20 1 1. According to the spirit of the Notice of Ministry of Human Resources and Social Security, General Administration of Market Supervision, on Printing and Distributing the Provisions on the Professional Qualification System of Registered Metrologists and the Implementation Measures for the Professional Qualification Examination of Registered Metrologists (J.J.M. [2065 438+09] 197), the original qualification examination for registered metrologists was adjusted to the professional qualification examination for registered metrologists.
I. Implementing department
Ministry of Human Resources and Social Security State Administration of Market Supervision
Second, the topic introduction
The first-class registered surveyor qualification examination consists of three subjects: measurement laws and regulations and comprehensive knowledge, measurement data processing and measurement professional practice, and measurement professional case analysis. The professional qualification examination for secondary registered surveyors consists of two subjects: "Measurement laws and regulations and comprehensive knowledge" and "Measurement professional practice and case analysis". Among them, "case analysis of metrology specialty" is the subjective topic; Other subjects are objective subjects.
Third, the registration conditions
Any citizen of People's Republic of China (PRC) who abides by the Constitution, laws and regulations of People's Republic of China (PRC), abides by professional ethics, is honest and trustworthy, and is engaged in metrological technical work, and meets the registration requirements of the professional qualification examination for registered metrological engineers, may apply for taking the corresponding level of the examination for registered metrological engineers.
Registration conditions for the first-level registration measurement vocational qualification examination:
(a) to obtain a college degree in science and engineering, and to have worked for 6 years, including 4 years in metrological technology;
(two) to obtain a bachelor's degree in science or engineering, and to work for 4 years, including 3 years in metrology technology;
(3) Having obtained a bachelor's degree in science or engineering or graduated from a postgraduate class, and having worked for 3 years, including 2 years in metrology technology;
(four) master's degree in science or engineering, working for 2 years, including measurement technology 1 year;
(five) to obtain a doctorate in science or engineering, engaged in measurement technology for 1 year;
(6) Those who have obtained corresponding academic qualifications and degrees in other disciplines will have their working years and minimum working years in metrology increased by 1 year.
Registration conditions for the professional qualification examination for Class II registered surveyors:
Have obtained technical secondary school education or degree or above, and have been engaged in measurement technology for at least 1 year.
Four. Registration method and notification commitment system
Those who meet the requirements of the professional qualification examination for registered metrology engineers can register for the examination in China Personnel Examination Network (cpta.cn) within the specified time. The registration of the professional qualification examination for registered metrology engineers is subject to the notification and commitment system for registration certification matters. Applicants must promise to meet the registration conditions, the information provided at the time of registration is true, accurate, complete and effective, and they are willing to bear the responsibility of false promises. The qualification examination department (institution) shall handle relevant matters for the applicant according to his promise. Examination institutions strengthen post-event supervision and deal with false promises and violations.
Before registering, you must register, upload photos, etc. When registering, you must carefully read and know the registration instructions, as well as the provisions of the relevant vocational qualification system and the examination implementation measures on the examination registration conditions, truthfully fill in my relevant information, sign the professional and technical personnel qualification examination registration commitment letter within the specified time, submit the registration information, and pay online. Please refer to the relevant notices of various provinces (autonomous regions and municipalities) for specific arrangements for registration.
Verb (abbreviation for verb) grade and certificate management
Those who have taken the professional qualification examination for Class I registered surveyors have passed the examinations in all subjects for three consecutive examination years. Those who participated in the professional qualification examination for Class II registered surveyors passed the examinations in all subjects for two consecutive examination years. In principle, the examination results will be published on the websites of China Personnel Examination Network (cpta.cn) and the personnel examination institutions of all provinces (autonomous regions and municipalities) within two months after the end of the examination.
Those who have passed the professional qualification examination for registered metrology shall be awarded the professional qualification certificate for registered metrology by the human resources and social security departments of all provinces, autonomous regions and municipalities directly under the Central Government. The certificate is uniformly printed by Ministry of Human Resources and Social Security, and the General Administration of Market Supervision and Ministry of Human Resources and Social Security use the same seal, which is valid throughout the country.
Sixth, the handling of violations of discipline and discipline.
Candidates who deliberately conceal the real situation, provide false promises or have disciplinary actions shall be dealt with in accordance with the Provisions on Handling Disciplinary Actions in Professional and Technical Personnel Qualification Examination (Ministry of Human Resources and Social Security 3 1 Order), and those suspected of committing crimes shall be transferred to judicial organs for handling.
Seven. register
The state applies registration management to registered metrological technicians who perform metrological verification tasks in legal metrological verification institutions and technical institutions authorized by market supervision departments. Personnel who have obtained the professional qualification certificate of registered metrological engineer must obtain the registration certificate of registered metrological engineer before carrying out corresponding metrological verification activities.
Eight. any other business
Residents of Hongkong, Macau and Taiwan Province Province who meet the registration requirements for the examination may apply for taking the professional qualification examination for registered metrology engineers.