Commitment letter of safety in production 1 For personal safety and health, for the stable development of the enterprise, strictly abide by relevant systems, and in line with the principle of putting prevention first and safety first, we hereby make the following commitments to ensure safety in production, come to work happily and go home happily.
First, we must strictly abide by relevant national laws and regulations. Before work, you must check whether all kinds of protective equipment, tools and instruments are good and reliable. Before operating the circuit, we must check the electricity with an electronic probe.
Second, we must understand and master the structure, performance, safety operation procedures and other related safety systems of our electrical equipment, and strictly implement them.
3. Be responsible for managing the quantity, dynamics and status of electrical equipment and lines within the specified range: obey the leadership of the group leader (monitor) and the command of the audience management personnel, complete the maintenance and installation tasks of electrical equipment and lines within the specified range in time, and be on call.
Four, according to the plan and arrangement, maintenance and installation work on time, tools, materials and spare parts must be prepared before work. When working, you must strictly abide by the operating rules and the system of stopping power transmission to ensure safe operation. Do a good job in debugging and acceptance of maintenance or installation equipment.
Five, strict labor discipline, make full use of working hours, shall not be absent without leave during work, do not do private or work-related things.
Six, electrician on duty must stick to their posts, strictly abide by the system of succession, and make a good record of succession.
Seven, strictly implement the relevant rules and regulations, it is strictly prohibited to live work, work after power failure.
To hang a power outage sign, the initial lock should be locked and the power generation work should be done well.
Eight, when climbing a ladder, should first check whether the ladder is safe and reliable, placed at an appropriate angle, pay attention to non-slip.
Nine, aerial work, it is forbidden to throw things, seat belts should be tied to the poles and fixed parts.
Ten, in case of a thunderstorm, windy weather, it is strictly prohibited to work on high-altitude lines. This letter of commitment is made in duplicate, one for filing and the other for keeping by the promisor.
Commitment: Department to which the post belongs: Department Head (signature):
date month year
Commitment to safety in production 2 As the legal representative (actual controller and main person in charge of operation) of an enterprise (unit) and the first person in charge of safety in production, I solemnly promise to do a good job in safety in production in this unit from 20xx to 20xx as follows:
First, strictly abide by laws and regulations.
Strictly abide by the national and provincial laws, regulations, principles and policies related to production safety, firmly establish the concept of scientific development and safe development, enhance the "bottom line thinking" and "red line consciousness", correctly handle the relationship between safety and production, and consciously do not produce safely. Effectively implement the main responsibility of the legal person, strictly manage safety, and strive to avoid fatal accidents and major property losses.
Two, conscientiously do a good job in the standardization of production safety, and strive to improve the level of intrinsic safety of enterprises.
1. Continue to deepen the construction of "three systems", and further formulate, modify and improve various responsibility systems, rules and regulations and operating procedures in accordance with the requirements of laws, regulations and industry standards and in combination with the actual situation of enterprises.
2, according to the provisions of the "production safety law", earnestly fulfill the responsibility of the first person responsible for production safety, and resolutely overcome the phenomenon of "three violations"; According to the provisions, set up safety production management institutions, equipped with full-time management personnel; At least once a month, I will preside over a special meeting on production safety, and study and solve the important problems of production safety in this enterprise in time.
3. Strengthen the identification and supervision of major hazard sources, set up necessary protective facilities according to regulations, and implement regulatory measures and regulatory responsibilities.
4, often in-depth front-line organizations to carry out hidden dangers investigation, urge all departments to seriously implement the hidden dangers investigation and management system, continue to carry out hidden dangers investigation and management work, implement hidden dangers investigation responsibility, and achieve "five implementations" for the hidden dangers identified.
5. Strictly implement the "three simultaneities" regulations, continuously ensure that the safety facilities are in good condition and up to standard, and ensure the investment of safety production funds.
6. Strictly implement the relevant regulations on occupational health, ensure that the working environment meets the requirements of laws, regulations and industry standards, provide necessary protective measures for injured employees, carry out physical examination according to regulations, truthfully inform workers of the occupational hazard factors, testing and physical examination results, establish and improve occupational health files and occupational health monitoring files, and ensure that no occupational cases occur.
7, the implementation of the relevant provisions of the safety training, complete the annual training task, without training or examination unqualified don't arrange mount guard, seriously carry out safety production publicity and education, typical accident warning education activities.
8, in accordance with the relevant provisions and requirements, formulate and improve the emergency rescue plan, equipped with the necessary personnel and equipment, at least once a year to organize a full participation in emergency rescue drills.
9. Consolidate the achievements of "standardization of production safety", carry out a self-assessment of standardization of production safety once a year, and improve the standardization level and grade year by year.
Three. Committed to the following key tasks.
1. Strictly implement the Work Specification for Safety Routine Inspection of Passenger Cars Operating in Passenger Stations and the Work Specification for Exit Inspection of Passenger Cars Operating in Passenger Stations, and ensure the implementation of the "three no-entry, six no-exit" system, "three products" blocking, routine vehicle safety inspection and exit inspection procedures and specific measures;
2. Strengthen fire safety management, conduct fire prevention education once every quarter, conduct fire drills once every six months, and conduct a special fire prevention rectification for the fire pipe network, fire alarm equipment, lightning protection facilities and fire equipment of this unit every six months to enhance the ability to prevent fire accidents;
3. Strictly manage the leased premises, sign a safety agreement once a year, organize the safety education and training of the person in charge of the lessee once every six months, and conduct a safety inspection of electricity and fire-fighting equipment once a month to eliminate hidden dangers in time;
4. Conduct a self-assessment against standardized evaluation indicators every year, and report the self-assessment results to the industry safety supervision department.
Four, to the public commitment, publicity, accept the supervision of social and safety supervision departments and enterprise employees.
Conduct a safety debriefing to the industry safety supervision department at the end of each year; Make a safety report to the workers' congress every six months. Failing to fulfill the terms of commitment, voluntarily accepting the sanctions of disciplinary measures for dishonesty and the upper limit punishment stipulated by relevant laws; In the event of a fatal accident, take the initiative to suspend production or business for rectification in part or in whole, so as to achieve "four misses"; I voluntarily accept the relevant punishment of the government.
Commitment period:
Signature of undertaking enterprise (unit): signature of legal representative:
Signature of actual controller:
Signature of main person in charge of operation:
20xx year month day
The security department is the company's security department and the functional department responsible for the company's security work. The employees of the security department are mainly responsible for the security of the hotel, maintaining the public order inside the site and ensuring the property and personal safety of the company and its personnel. Therefore, in order to clarify the responsibilities of employees in the security department, this commitment letter for safety production is formulated:
A, study hard, strictly abide by the rules and regulations, abide by labor discipline, not illegal, directly responsible for the safety and environmental protection construction of this position;
Second, strictly implement the handover system, carefully record the handover situation and handle the handover procedures.
Third, strict procedures for goods access and release. Put an end to the loss of goods and vehicles caused by lax control.
4. When the vehicle is in the factory area at night, the security personnel earnestly carry out the inspection task to prevent the vehicle or personnel from being stolen, and timely treat the behavior that damages the interests of the company as damage.
Five, to dress neatly and stick to their posts, shall not leave, channeling post, often patrol, check the area of responsibility, in a timely manner to find unsafe hidden dangers. .
Six, the security guard of the fire center should check the normal operation of the fire fighting equipment in the company every day. When it is found that fire control facilities and equipment can not operate normally or are abnormal, it shall report to the department head in writing in time.
Seven, patrol security personnel, correct analysis, judgment and handling of various emergencies, in accordance with the provisions of the site to conduct a thorough inspection, to prevent theft, murder, fire and other accidents.
Eight, theft or fire in the factory, security personnel rushed to the scene in time after receiving the alarm, to prevent the accident from expanding.
Nine, actively participate in various safety and environmental protection activities, post technical training, improve safety.
Ten, environmental awareness and skills; Don't collude with idle people and sewing machines in the factory for personal gain.
This letter of commitment is made in duplicate, one for filing and the other for keeping by the promisor.
Commitment: Department of the position:
Head of department (signature):
date month year
Commitment to Safety in Production Chapter IV While we are committed to developing production, we firmly establish the concept of giving priority to environmental protection, consciously assume social morality and responsibility, and abide by environmental laws and regulations. The enterprise solemnly promises:
First, strengthen environmental publicity and education and training, improve the environmental awareness of enterprise cadres and workers, set up full-time (part-time) environmental protection institutions, equipped with full-time environmental protection personnel.
Second, strictly implement the environmental impact assessment and the "three simultaneities" system, actively dismantle production devices that do not meet the approved scale of environmental impact assessment, start with eliminating backward production capacity and upgrading technology and process, reduce pollutant discharge, ensure that pollution control facilities match production capacity, and discharge pollutants stably up to standard.
Three, the establishment of standardized sewage outlets, the implementation of sunshine sewage. Actively carry out self-inspection, do not steal or leak, if there is illegal smuggling, take the initiative to accept various penalties including the content of suspension of production and rectification. In case of any of the following illegal acts, take the initiative to take the following measures for rectification, and if an excessive discharge is found within one year, take the initiative to rectify within a time limit; Twice, suspend production for three months; Three times, turn it off by itself.
Four, abide by the sewage permit system, strictly control the total amount of sewage, pay sewage charges and other fees payable according to law on time. Do a good job in credit card pollution discharge and strictly control the total amount of pollution discharge; Understand the difficulty of small water environment capacity in our town, unconditionally obey the dispatch of environmental protection department and stop production in time.
Verb (abbreviation of verb) strengthens emergency management and maintains security and stability. Formulate and implement emergency plans for pollution accidents and organize emergency drills on a regular basis. In case of pollution accidents and mass incidents, in addition to taking corresponding responsibilities, they are willing to take the initiative to accept punishment, and actively cooperate with relevant departments to deal with the aftermath of the accident and eliminate the impact to the maximum extent.
Sixth, establish a long-term mechanism that can stand the test. We should always do a good job in environmental protection and form a long-term management mechanism that can withstand any form of inspection by environmental protection departments at all levels. Those investigated and dealt with by the environmental protection department at a higher level shall be suspended for three months.
This is our solemn commitment to the society, please supervise it from all walks of life.
Commitment unit: legal representative:
Tel: Address:
Chapter V Commitment Letter on Work Safety In order to implement the national and superior laws and regulations on work safety, further implement the company's main responsibility for work safety, prevent and reduce all kinds of accidents, and ensure the stability of the company's work safety situation, this department solemnly promises as follows:
1. Under the leadership of the company's legal person and safety system supervisor, be fully responsible for the promotion and management of the company's commitment to safety production, ensure the company's safety work, and continuously improve the management level.
Second, the company's "three systems" will be implemented at all levels and positions, and will be seriously implemented in practical work. Establish, improve and strictly implement the responsibility system for production safety, conscientiously implement "one post and two responsibilities" and strengthen grassroots and basic work.
Third, fulfill the obligation of safe production. Implement the safety production policy, actively implement the main responsibility of the department for safety production, establish a safety management organization, and equip safety management personnel according to regulations. Accept the supervision and management of the government and the safety management department, and effectively implement the responsibility for safety work to all posts and responsible persons.
The fourth is to formulate a system of rewards and punishments for production safety and accountability, and reward groups and individuals who have made outstanding contributions to production safety. Those who violate the production safety system and operating rules and cause accidents will be punished in hell to pay and handed over to judicial organs.
5. Assist the production and transportation department to collect road information through road inspection control points, and provide safety guarantee for the company's vehicles during transportation.
Six, detection of energy and power equipment daily use and maintenance management.
Seven, in order to ensure the personal safety and health of employees, according to the relevant provisions of the state, formulate personal protective equipment, health care allowance payment standards, and urge the relevant departments to timely distribute and check the use of personal protective equipment in accordance with the provisions.
Eight, organize the company's safety inspection, put forward rectification opinions on the hidden dangers of accidents found in the inspection, assist and urge relevant departments to implement hidden dangers rectification measures, track hidden dangers rectification, conduct safety inspection on the production site, help solve related safety problems, and correct violations.
Nine, formulate emergency rescue plans, set up emergency rescue organizations, supervise and inspect the implementation and maintenance of emergency rescue personnel, equipment and equipment, and organize rescue drills regularly. When an accident occurs, immediately organize rescue, and be responsible for finding out the cause of the accident and taking preventive measures. Accident investigation and handling should adhere to the principle of "four don't let go" and establish the company's safety accident files.
Ten, investigate and deal with personal injury, fire, explosion, traffic, environmental pollution, poisoning and major, malignant attempted accidents, organize work-related injury identification, responsible for work-related injury identification.
XI. Prevent all kinds of fires, strengthen fire safety management, and ensure the personal and property safety of the company. Manage the safety and fire-fighting equipment and facilities of the department, do a good job of inspection and maintenance, keep flexible and easy to use, and train employees to use all kinds of fire-fighting equipment correctly.
Twelve, to ensure that the safety exits and evacuation routes are unimpeded, and no obstacles are set on the evacuation routes. Formulate the company's emergency plan for fire fighting and evacuation, and seriously rectify fire hazards.
Thirteen. Organize regular safety activities and safety production meetings, implement the company's safety production decisions, solve relevant safety problems, and promote safe production and civilized production.
The above promises to accept the supervision of company employees and society. In the event of a liability accident, the person in charge of the department should bear the corresponding legal responsibility and accept the corresponding punishment.
Unit (seal):
Legal representative of the Company: the person in charge of production safety of the department:
Commitment letter for safe production Article 6 In order to implement the national and superior laws and regulations on safe production, further implement the company's main responsibility for safe production, prevent and reduce all kinds of accidents, and ensure the stability of the company's safe production situation, this department solemnly promises as follows:
First, implement the company's "three systems" at all levels and in all positions, and conscientiously implement them in practical work. Establish, improve and strictly implement the responsibility system for production safety, conscientiously implement "one post and two responsibilities" and strengthen grassroots and basic work.
Second, fulfill the obligation of safe production. Implement the safety production policy, actively implement the main responsibility of the department for safety production, establish a safety management organization, and equip safety management personnel according to regulations. Accept the supervision and management of the government and the safety management department, and effectively implement the responsibility for safety work to all posts and responsible persons.
Three, unified coordination and management of contractors and tenants of production safety work, and signed a safety agreement with the relevant units.
Fourth, ensure the personal safety and health of employees, provide labor protection articles that meet the standards, and supervise, remind and educate employees to wear labor protection articles.
Five, cooperate with the safety inspection, do a good job of safety production and accident hidden danger investigation within the scope, solve the existing problems in time, and complete the safety technical measures plan and accident hidden danger rectification project on schedule.
Six, improve the safety quality of employees, regularly carry out safety education for employees, learn the company's instructions, regulations and safety regulations on safety production, and master the post operation procedures.
Seven, implement the company's production safety accident emergency plan system, and cooperate with the safety management department to carry out the implementation and drills of the accident emergency plan.
Eight, prevent all kinds of fires, strengthen fire safety management, to ensure the personal and property safety of the company. Manage the safety fire-fighting equipment and facilities of the department, do a good job in inspection and maintenance, keep flexible and easy to use, train employees to use all kinds of fire-fighting equipment correctly, and strengthen the safety of fire and electricity use.
Nine, to ensure the safety exit and evacuation routes unimpeded, do not set obstacles on the evacuation routes. Formulate emergency plans for internal fire fighting and evacuation, and seriously rectify fire hazards.
X actively participate in safety learning activities and safety production meetings organized by the company, and regularly report safety work to the safety production management department.
The above promises to accept the supervision of company employees and society. In the event of a liability accident, the person in charge of the department should bear the corresponding legal responsibility and accept the corresponding punishment.
Unit (seal):
Legal representative of the Company: the person in charge of production safety of the department:
20xx year month day
Commitment letter for safe production 7 XXXXX:
According to the Law of People's Republic of China (PRC) on Work Safety, the legal representative (actual controller) of each unit and the first person responsible for work safety are fully responsible for the work safety of this enterprise. In order to implement the spirit of the Notice of the General Office on Forwarding the Provincial Safety Committee on the Implementation of the Legal Representative's Commitment to Work Safety and the Legal Representative's Commitment to Work Safety System by Production and Business Units in Key Industries (Fields) in the province, we will conscientiously implement the national and provincial laws, regulations, standards and policy requirements on work safety, earnestly implement the responsibility of safety management and the main responsibility of work safety in each coal mine, and strive to do a good job in work safety in this enterprise (unit) to reduce and eliminate production safety accidents.
First, strictly abide by national and provincial laws, regulations and various safety rules and regulations, adhere to the principle of "safety first, prevention first, comprehensive management", conscientiously implement the responsibility system for production safety of personnel at all levels, and put an end to all kinds of safety accidents.
Second, in accordance with the deployment of the provincial offices, we will earnestly organize and carry out the "year of implementation of the main responsibility for safety production in coal mine enterprises", fully implement the safety management responsibility and safety main responsibility of each coal mine, and make it planned, arranged, inspected and implemented.
The third is to strengthen the assessment of safety objectives, formulate the work priorities and measures to achieve the company's annual safety production objectives, and track and check the implementation.
Fourth, fully perform the duties of the legal representative of the enterprise as the first person responsible for safety production, establish and improve the safety production management organization according to law, improve the safety production management system, and equip enough safety management personnel to ensure that the safety organization plays its functional role and the safety production management personnel perform safety management duties, so as to standardize and standardize the safety production management.
Five, conscientiously implement the responsibility system for safety management inspection and guarantee, to the coal mine safety management agencies and "five-person safety supervision team", the implementation of safety supervision and inspection responsibilities. Take coal mine merger, reorganization and integration as the focus of recent safety work, strengthen on-site safety management, and ensure that safety management responsibilities are put in place.
Six, strictly implement the leadership system of coal mining enterprises, strengthen the organization and leadership of production safety. Team leaders, like workers, should earnestly perform their duties, strengthen on-site guidance and supervision of key parts and key links, timely solve outstanding problems encountered in on-site safety production, and earnestly strengthen on-site management.
Seven, seriously organize the implementation of the "coal mine safety and quality standardization construction" project, before the end of this year, all production mines and new, renovated mines must meet the provincial safety and quality standardization standards.
Eight, seriously organize the implementation of the "people-oriented safety training and education to improve quality" project, innovate the safety training mechanism with heart, strictly implement the main responsibility of safety training in coal enterprises, increase the intensity of safety training and education for employees, show certificates as required, and comprehensively improve the quality of all employees. Nine, strictly control the acceptance of coal mine resumption of work and production, strictly implement the principle of "who is in charge, who checks, who checks, who signs and who is responsible", conduct acceptance according to standards and procedures, do not arbitrarily simplify procedures, do not artificially lower standards, and do not delegate approval authority to ensure the quality of acceptance of resumption of work and production.
Ten, increase investment in safety, according to the provisions of the full extraction of safety fees and pay risk of mortgage, to ensure that coal mines continue to have the safety conditions stipulated by laws, regulations, rules, national standards and industry standards.
Eleven, seriously organize the investigation and management of hidden dangers, improve the investigation and management and reporting system of enterprise hidden dangers, and effectively manage major security risks. It is necessary to speed up the construction of the "six systems" for safety and avoidance in coal mines in accordance with regulations, implement the monitoring duties of major hazard sources, and implement effective supervision, monitoring and rectification of major hazard sources.
Twelve, conscientiously implement the "one ventilation and three prevention", water disaster prevention, roof management and other key links of safety precautions, resolutely put an end to ultra-potential, ultra-strength, super-capacity production, to ensure safety in production.
Thirteen, put an end to illegal production and construction, strictly implement the safety responsibilities of all parties in the construction, construction and supervision of new and expanded mines, and implement the "three simultaneities" system for coal mine construction projects. Mines that fail to meet the provincial safety and quality standardization standards and fail to pass the final acceptance shall not organize production. Ensure that the construction units engaged in construction have corresponding qualifications, and do not subcontract or subcontract.
Fourteen, strictly implement the responsibility of coal mine employment management, safeguard the rights and interests of employees, carry labor protection articles that meet the national standards or industry standards for employees, and supervise and educate them to wear and use them correctly.
Fifteen, the legal representative of the regular office meeting, study the important issues of production safety, make decisions and decisions, and organize their implementation.
Sixteen, after the mine is closed, it should be merged, reorganized and integrated, create conditions, and promptly draw the local city and county people's governments to organize the closure according to the "six standards".
17. Don't command against regulations, and don't force employees to take risks against regulations. In case of danger, organize relevant personnel to evacuate the site in time.
Eighteen, according to the law to develop emergency rescue plans for production safety accidents, and regularly organize drills, the implementation of emergency measures for operating posts.
Nineteen, according to the requirements of reporting production safety accidents, accident rescue, not late, concealment, omission of safety accidents.
Twenty, perform other duties of production safety as prescribed by laws and regulations.
As the legal representative of the enterprise and the first person responsible for production safety, I am willing to take full responsibility for production safety management. If I violate the above commitments and fail to perform the duties of safety production management, resulting in a job accident, I voluntarily understand the corresponding penalties stipulated by administrative, economic and legal regulations and bear the corresponding consequences.
Chapter VIII Commitment to Safety Work For the sake of personal safety and health and the stable development of enterprises, I voluntarily sign and abide by the following commitments in my work:
Safety responsibility
(1) Strictly abide by labor discipline, do a good job in safety inspection before and after daily work, and use labor protection articles and safety devices correctly.
(2) Repair the car and dismantle the crane in sequence. For example, when the engine is overhauled, the anchor screws and accessories should be removed first.
(3) When repairing the chassis, the frame must be padded to prevent overturning and flowing.
(4) When inflammable and explosive articles need to be used in the garage, check whether there are potential safety hazards around. When the car needs electric welding, the fuel tank should be removed first.
(5) All kinds of oil used for automobile repair shall be kept strictly and shall not be moved, and smoking is prohibited in the workplace.
(6) When two or more people cooperate, they should take care of each other, cooperate with each other and keep pace.
(7) Check whether the pressure ring is installed before tire repair. Pay attention to the barometer when inflating to prevent the air pressure from being too high; When repairing tires with fire, pay attention to the temperature of the electrocautery pliers.
(8) The test driver must have a driver's license. During the trial operation, the speed should be increased or decreased according to the use of the vehicle. It is forbidden for large and medium-sized vehicles to drive at high speed or overload or tow vehicles.
(9) Carefully disassemble the parts and strengthen the storage of the parts. Parts should be placed neatly. After the work, the equipment and tools should be scrubbed and counted, and the workplace should be cleaned.
20xx year safety production target
The mortality rate per thousand people is 0;
The serious injury rate of thousands of people is 0;
The rate of minor injuries per thousand people is 0;
The incidence of occupational diseases is 0;
Major equipment accident is 0;
Major fires and other accidents are 0.
I consciously abide by the above commitments, and I am willing to take responsibility if I violate them.
This letter of commitment shall come into effect as of the date of signing.
Organizer (signature): type of work: position
Department:
Head of department (signature):
date month year