This prompt usually appears after the front cover is opened, and then the electronic dipstick will have this prompt. The trip computer thinks it can refuel, and the electronic dipstick needs to be re-read. It takes 2 to 3 minutes to start the engine, and then the display information will come out after 2 to 3 minutes of engine shutdown.
Extended data:
Precautions for automobile fuel gauge:
1, don't wait for the alarm light to come on.
Because the gasoline pump is in the oil tank, it depends on gasoline for heat dissipation and lubrication. Too little oil will not be conducive to the normal operation of the oil pump and reduce its service life.
2. It is not recommended to fill it up when refueling.
Because gasoline expands when heated, the high temperature in summer volatilizes into gasoline vapor, which needs space to accommodate. If there is no room for too much, gasoline vapor and even liquid gasoline will enter the carbon tank for storage, and when the carbon tank is full, it will escape into the air, which is not only a waste but also pollutes the environment.
3. Indication deviation
After changing the battery or gasoline filter every day, or even after parking for one night, when the vehicle starts again, it may be noticed that the indicator of the fuel gauge is lower than the previously displayed position, which is considered as a fault. In fact, it is a normal phenomenon, because when the oil pump is working, there is negative pressure in the oil tank, and the corresponding oil tank volume decreases and the oil level is on the high side. In addition, the temperature has a thermal effect on gasoline, so it naturally shows a high level. When the temperature drops, the fuel tank opens, the pressure is released, and the oil level drops accordingly, so it is normal to display deviation. But the deviation will not exceed one pointer width.