First, waxing the floor can decontaminate and polish, increase beauty, prevent insects, prevent moisture and crack, and prolong the service life of the floor, which is a necessary measure for floor maintenance. However, if the floor is waxed improperly, it will cause whitening, ring marks and discoloration, which is counterproductive. So we must pay attention to the following matters when waxing the floor.
1. Waxing in sunny days.
If the humidity is too high, waxing in rainy days will produce white turbidity. When the room temperature is below 5 degrees, the floor wax will harden. Before waxing, don't wipe the floor with a rag containing chemicals, which will lead to poor adhesion of wax on the floor.
2. Remove the garbage and dirt on the floor surface.
Use a vacuum cleaner to remove rubbish and dust from the floor surface. Wipe the stains on the floor with diluted neutral detergent. Stains that are difficult to remove can be wiped with acceptable water. In order to prevent the detergent from accumulating in the groove, the dishcloth soaked with detergent should be wrung out as much as possible. Floor wax remover will cause the floor to be dirty and swollen, so it must not be used.
3. Wipe with a wringing rag.
Wipe with a rag that has been wrung hard. The floor surface, especially the groove part, should be carefully wiped, and no detergent can be left. Such as residual detergent and moisture, will lead to whitening and edema of the surface.
Step 4 dry completely
Before waxing, the water on the floor surface and groove is completely dry. According to different seasons, the time required also varies, but it takes more than half a day. If it is not fully dried, the floor wax will not closely adhere to the floor surface, which will affect the appearance and cause whitening.
Second, the waxing method
1. Shake the container filled with floor wax, and stir thoroughly and evenly.
2. Before waxing the whole floor of the room, try it locally in an inconspicuous place such as the corner of the room to confirm whether there is any abnormality.
3. In order to prevent floor wax from polluting the skirting line of walls and furniture, cover the above parts with adhesive tape.
4. Fully dip the floor wax with a clean rag without dripping. Don't pour floor wax directly on the floor, otherwise it will produce stains and ring marks.
5. Don't dilute the floor wax with water.
6. Waxing tools can be waxed with a special mop, with simple operation and ideal effect.
Note: Don't walk on the floor before the floor wax is dry. Drying usually takes 30 minutes to 1 hour. If any coating is missing, please make up the coating. If waxing is used twice, the second coating should be carried out after the first complete drying. Waxing once every 6 months can keep the floor beautiful for a long time.
Fairview park floor decoration answer, I hope I can help you.