1. Introduction:
In order to meet the needs of the rapid development of China's non-ferrous metal materials industry, the comprehensive research and development and technological innovation capabilities of new materials, new processes and new equipment in the processing field of non-ferrous metals (especially copper, aluminum, magnesium, lead, zinc and other bulk non-ferrous metals) in China are improved, and at the same time, a sound scientific research system is formed around the "mining, selection, smelting and processing" industrial chain of Chinalco to improve the overall research and development capabilities of the group company. Luoyang Nonferrous Metals Processing Design and Research Institute, Southwest Aluminum (Group) Co., Ltd., Central South University and Northwest Nonferrous Metals Research Institute jointly initiated the establishment of Suzhou Nonferrous Metals Processing Research Institute (hereinafter referred to as Suzhou Institute). The above units basically represent the highest level of production, learning, research and design of non-ferrous metal materials and processing equipment in China at present. Through system innovation and making use of their respective advantages in technology, management and talents, we will strive to build our institute into an R&D and industrialization institution of nonferrous metal processing technology and equipment with excellent performance and international reputation in about 5 ~ 10 years. When the time is ripe, we will strive to establish the "National Research Center for Copper and Aluminum Processing Engineering" based on our institute.
Suzhou Institute is located in Suzhou Singapore Industrial Park, covering an area of 8 hectares, with a registered capital of 50 million yuan and an initial investment of 75 million yuan, which is mainly used for the construction of land, buildings and experimental equipment. The Institute is composed of research institutions such as materials, mechatronics, information, heat energy, testing, pilot test, etc. In the past two years, it plans to prepare 200 people, plus an indefinite number of visiting researchers. It is estimated that 60 people will be in place by the end of 2004 and 100 people will be added before the end of 2005. Suzhou Institute will be headed by Zhou Lian, academician of the Chinese Academy of Engineering and chairman of China Nonferrous Metal Materials Association, and Zhong Jue, academician of the Chinese Academy of Engineering and an expert in non-ferrous metallurgical equipment, will be the chief researcher. All joint ventures and cooperative units have sent scientific research backbones and recruited some social experts. The proposed personnel structure is: doctor or senior title 15%, master or deputy senior title 45%, bachelor or intermediate title 20%, junior college or junior college title 20%.
After the establishment of Suzhou Research Institute, the following topics will be studied in the near future: (1) continuous (online) melt treatment technology outside the furnace; (2) Semi-continuous casting technology; ⑶. Integration technology of process automation system for high-precision plate mill: ⑶. Processing technology of aluminum alloy plate for automobile body: 5. Processing technology of bimetallic composite strip foil: [6]. Processing technology of high-precision copper strip for integrated circuit lead frame: once. Microstructure and properties control technology of aluminum alloy extruded products: (8) new processing technology of copper and alloy pipes, bars and special-shaped materials; Tax. Production technology of special alloy wire rod: ⑽. Research on metal surface treatment technology. Among them, the basic automation technology of medium and heavy plate rolling mill has a good development foundation and is in a leading position in China, and the domestic market share of rolling mill has reached more than 80%. Other research topics are also urgently needed in the current market and production, which can basically reflect the development trend of non-ferrous metal processing technology and equipment and realize the strategic goal of replacing import and localization.
With the support and cooperation of China Aluminum Company, Suzhou Municipal Government, the leaders of the Park Management Committee and relevant departments, after nearly two years' efforts, Suzhou Institute has successfully completed the preliminary work such as industrial and commercial registration, planning and design, construction of15,000m2 main building and ancillary facilities, and ordering of key and general experimental equipment and detection and analysis instruments. It is expected to be put into operation in early September 2004.
2. Main departments:
Materials Research Institute: Facing the national strategy and the demand of enterprises for new colored materials, it conducts research on the relationship between material composition, microstructure, processing and heat treatment technology and physical and chemical properties of materials, and provides complete sets of industrialized technologies such as process regulations, mathematical models, process parameters and process methods for material production enterprises.
Electromechanical Institute: Cooperate with the research and development process of new materials, and provide complete sets of mechanical, electrical and hydraulic equipment for the pressure processing process for material production enterprises. At the same time, it provides the old enterprises with the optimization and upgrading services of the original non-ferrous metal processing equipment and its supporting automatic control system.
Information Engineering Research Institute: Based on the technological regulations and mathematical models of pressure machining, it provides process automation technologies such as parameter setting calculation results and adaptive and self-learning models for the process control of electromechanical research institute. At the same time, combined with the needs of production enterprises, the management services of enterprise three-level (production plan management) and four-level (enterprise comprehensive resource management) information systems are completed.
Research Institute of Thermal Energy and Environmental Protection: provides complete sets of technology and equipment for the production and environmental protection processes of smelting, casting and rolling, heating, heat treatment, flue gas treatment and waste liquid treatment of non-ferrous processing enterprises.
Material testing center: using advanced testing and analysis equipment, it provides testing and analysis services for the composition, organization and performance of materials and the research and development of electromechanical equipment. At the same time, it can provide related services for all walks of life.
Pilot workshop: cooperate with the research and development of new materials and their processing equipment, provide productive intermediate test means, explore and summarize reasonable process regulations, mathematical models, process parameters and process methods. At the same time, it can produce small quantities of special non-ferrous metal materials that are difficult to process in all walks of life.
3. souvenirs:
200 1:
65438+On February 6th, it signed a contract with Sino-Singapore Suzhou Industrial Park Development Co., Ltd. to transfer 80,004 square meters of land use rights.
In 2002:
On July 2 1, Luoyang Nonferrous Metal Processing Design and Research Institute issued a document to establish the preparatory office of Suzhou Nonferrous Metal Processing Research Institute.
16 September 6, the preparatory office was listed, No.3, Hufu Road, Suzhou.
On September 26th, the Economic and Trade Development Bureau of Suzhou Industrial Park issued the Approval Letter of Suzhou Research Institute (Su Fa [2002] No.80).
165438+1On October 5th, China Aluminum Company issued the Reply on the Establishment of Suzhou Institute (Chinalco Zi Zi [2002] No.265).
65438+On February 2nd, Suzhou Industrial Park Industrial and Commercial Bureau issued the business license.
In 2003:
/kloc-Complete the survey, planning and design before 0/month.
(SARS stopped work in April and May).
Complete the bidding and sign the construction contract before July.
A groundbreaking ceremony was held on August 28th, attended by leaders of Chinalco, the municipal government and shareholder units.
/kloc-signed the supply contract of general pressure processing equipment in June of 0/0.
In 2004:
In May, the main building of10.5 million square meters, such as expert building, material building, special material building and experimental workshop, was completed, and the decoration and the construction of ancillary facilities such as roads, pipe networks and weak electricity began.
On June 26th, the first general meeting of shareholders and the first board meeting were held in Luoyang. Elected Wang Jinghai as president, appointed Wang Jinghai as president, appointed Zhou Lian as honorary president and Zhao Jieyang as vice president.
4. Comprehensive evaluation method
This unit is very powerful and promising. It is a park enterprise with a fairly wide area. Its parent company is Luoyang nonferrous metal processing design and research institute and other units, and it is a consortium of many powerful enterprises. However, Suzhou Institute has quite high requirements for talent recruitment, and those below master's degree are not required. Employee welfare shall be implemented in accordance with the relevant regulations of the state and the park. Suzhou Institute is going to invest in the second phase of the project and expand office buildings and other facilities in the near future (it should be at the end of the year or early next year). If you can enter, you should be able to consider it. Not only for money, but also for their working environment and opportunities to develop themselves.