Note: this product can be used with water according to the proportion. No other materials are allowed! Before construction, the firmness, verticality and flatness of the base surface shall be confirmed; This product is suitable for use in the environment of 5℃-35℃ and relative humidity of 30%-85%. It is forbidden to add water and stir the dried mucilage before use. Tile glue should be used within 2 hours according to weather conditions; After the tile glue is scraped to the base surface, it must be pasted within the drying time; After the ceramic tile is pasted, it must be adjusted within the adjustment time to avoid affecting the strength; Check the mucilage layer on the back of the brick in time to ensure that there is no empty drum phenomenon, and the thickness of the mucilage layer is about half of the height of the used toothed screwdriver; Excess tile glue during construction should be removed before hardening; Do not mix dry mucilage with water before use. After bricklaying, the next joint filling can only be carried out after the mortar is completely dry. When the shop is stuck, there must be a gap ≥2mm between the tiles. When laying walls, pay attention to temporary fixing measures.
Want to know more about tile glue, recommend consulting Keshun home waterproofing. Keshun household waterproofing has the production capacity layout of the top ten production bases in China and the rapid response logistics service system. Covering the national market through dealer channels, e-commerce channels and home improvement channels. , providing one-stop home improvement accessories solutions for thousands of households. View future waterproof market bonus