* It is used for quick video of corrosion, crack, blockage or collapse inside the pipeline with the diameter of 10 mm-600 mm.
Diagnosis.
* The inspection length is 25m and 60m, which is suitable for the inside of the power station chassis, the central hole of the steam turbine shaft and the pressure vessel.
Internal, various industrial pressure pipelines, underwater operation under pressure, etc.
* Waterproof standard IP68, pressure 5 bar. * RS02 lens adopts Swiss precision transmission mechanism, and the 47mm lens body contains three groups of motors for rotation, steering and focusing;
* The diameter of the lens is 47mm, and the front end is illuminated by 24 high-brightness LEDs, which meets the IP68 waterproof standard and can prevent 50m water depth;
* adopting 1/4 inch CCD with 480,000 pixels, which is the highest level in the field of endoscope;
* The lens can rotate 220 in radial direction and 360 in axial direction, which is suitable for seamless detection of the inspected space;
* The lens can focus clearly in the range of 0-∞, which is not available in other domestic products at present.
* Applicable detection range: 60mm-800mm.
* Suitable for inspection field: cracks, welds, corrosion and other defects on the inner surface of the pipeline can be detected by being perpendicular to the pipe wall.
Test carefully. * The lens has a diameter of 24mm and is made of stainless steel, reaching the waterproof standard of IP68, which can prevent the water depth of 30 meters.
* The front of the lens is illuminated by 12 bright LEDs.
* 1/4 inch CCD, 440000 pixels, depth of field 20mm-∞
* Applicable detection range: 25mm- 100mm.
* Common detection fields: defects on the inner surface of narrow pipelines and detection of foreign bodies inside large pipelines. * The standard test line length is 25m.
* The inside is made of GFRP (glass fiber) and the outside is made of anti-corrosion and wear-resistant sheath.
* The wire diameter is 4.5mm, and the joint with the lens adopts waterproof slip ring structure, which makes the connection easy and safe;
* The inspection line has good delivery performance, and can walk horizontally in 500mm pipeline above 15m, which other products can't do.
acquire
* The detection line is resistant to trampling and bending, and is suitable for use under complex working conditions;
* Low maintenance cost, even if it is broken, only the slip ring joint needs to be replaced. Compared with the traditional alternative optical fiber materials, the cost is much lower. * 60m detection line, made of GFRP (glass fiber) with a line diameter of 7mm.
* 120m detection line, which is made of GFRP (glass fiber) with a line diameter of 9mm;
* The detection line of 60m and above is used with industrial controller, and the detection distance can be displayed on the screen in real time.
The accuracy is 0.0 1 m;
* 60m inspection line is suitable for long-distance and large-scale inspection of header and main steam pipeline? * Use a 5.6-inch display with a resolution of 800X600; ;
* Lens control function: it can adjust illumination, focus, lens rotation, lens rotation and other functions;
* Integrated photo and playback function: defects can be found in time through one-click photo and video recording function.
Record;
* screen display adjustment: you can adjust the contrast, saturation and brightness of the screen;
* It can work continuously for more than 5 hours once fully charged;
* Equipped with accessories such as hand straps and suspenders, which are convenient for field operators to use and provide detection efficiency. * The outer diameter of the lens protective sleeve is 60mm, made of nylon, which effectively protects the RS02 lens.
Protective components;
* 12 The outer diameter of the star wheel guide rail is 100mm, and there are 12 pulleys around it, which is also made of nylon.
Made, its function 1: protect the lens and prevent wear; Function 2: Center the lens relatively, and reduce the resistance for RS02 lens *;
* Make the lens absolutely centered in different pipes, which is convenient for seamless scanning of internal surface defects;
* The specifications of the variable diameter guide rail are: 60mm-200mm, 200mm-400mm, 600mm-800mm, 800mm- 1200mm, etc. , suitable for a variety of pipelines.
* When the inner surface is very smooth, additional auxiliary light sources can be used to eliminate glare.
Image quality for detection
* as an optional component * 10 inch industrial monitoring display, the display effect is equivalent to CRT display;
* Adjust the illumination and focal length of the lens through the knob;
* control the rotation and rotation of the lens through the 3D rocker;
* Special keyboard, which can be used for screen character superposition and record recognition;
* Connect the detection line of 60m and above, and the detection distance can be displayed on the screen with an accuracy of 0.01m;
* Video recording can be performed by inserting a USB flash drive.