Basic indicators are divided into four categories:
① The red indicator light represents a warning, and the owner should check the fault before driving.
(2) Yellow indicators play an early warning role and need to be dealt with as soon as possible.
(3) The blue indicator light plays a warning role, such as whether to turn on the high beam at a suitable road section.
④ The green indicator light is a function light, such as width indicator, turn indicator and low beam indicator.
The following is a schematic diagram of Mercedes-Benz C2 60L indicator light (the number corresponds to the schematic diagram).
4, cleaning liquid level
This means that it is time to fill the glass water storage tank with glass water.
5. Brake friction plate
If the friction plate wear is lower than the standard requirements and the braking effect becomes worse, it should be replaced in time. Please note that the friction plate on one shaft should be replaced at the same time.
19. Steering locking system
There is something wrong with the steering system, and the steering wheel won't turn. Don't tow the vehicle at this time, it will cause danger.
2 1. Tire inflation pressure monitoring system
If the tire pressure is too high or too low, this fault light will light up. Of course, it is also possible that the information was not re-entered after the tire change.
3 1. Electromechanical parking brake
When the indicator light is on, it means that the handbrake is put in place, and it will go out automatically after it is put down. The indicator light flashes continuously, indicating that the braking force is not enough to stop the vehicle from moving.
32. Battery capacity
The battery is low, but sometimes it can be charged while driving. If it doesn't disappear for a while, it needs to be repaired.
cooling system
In addition to the lack of coolant, the cooling fan may also fail.
49. Anti-lock braking system
The fault light is on, indicating that the anti-lock braking failed at this time. Problems with the electronic differential system E DS will also cause the fault light to light up. At this time, pressing the brake pedal at high speed may lead to uncontrollable behaviors such as side slip.
Fuel stock
When the fault light is on, it means that there is not much oil. When the fuel is sufficient, it will light up, indicating that the fuel system is faulty.
57. Engine oil level
The oil pressure is too low or the oil quantity is insufficient.
60. Electronic Control Driving Stability System (ESP)
Flashes during normal operation, lights up during failure, and lights up when the function is turned off. At this point, extreme operation may lead to risks such as tail flick.
62. Exhaust gas monitoring system
It may be that the engine failure leads to insufficient combustion and fails to meet the national emission standards.
@20 19