What are the characteristics of lightweight partition board?

Lightweight partition board is a new type of energy-saving wall material, which looks like a hollow floor, but there are male and female falcon grooves on both sides. During installation, the male and female falcons can be assembled simply by erecting the wooden board and coating a small amount of caulking mortar. It is composed of harmless phosphogypsum, light steel slag, fly ash and other industrial waste residues, and is cured by variable frequency steam pressure. The lightweight partition board has the advantages of light weight, high strength, multiple environmental protection, heat insulation, sound insulation, breath and humidity control, fire prevention, rapid construction and low wall cost. The weight is only one eighth of that of a solid brick wall, the strength reaches C30, the thermal conductivity is only one third of that of a solid brick wall, and the acoustic conductivity is only one quarter of that of a solid brick wall; Automatically adjust indoor air humidity, save industrial waste land, eliminate the pollution of industrial waste to air and water, save wall cost 15%-20%, and improve construction efficiency by 3-5 times. In addition, since harmless phosphogypsum is used for wet production, phosphogypsum does not need to be dehydrated and dried, so expensive equipment investment is not needed. Therefore, it can be said that the advent of lightweight partition board technology will open a new chapter in the comprehensive utilization of phosphogypsum, which has outstanding environmental protection significance. Modified lightweight partition board is a high-strength lightweight wall material made of light-burned composite cementitious materials such as magnesium oxide, magnesium chloride, silicon and calcium. By adding GX-V series magnesite modifier independently developed by Jinan, industrial waste residue such as fly ash and plant fiber such as crop straw, the inner layer is equipped with reasonable thermal insulation and sound absorption inorganic foam profiles or other thermal insulation materials, and the wallboard is made by assembly line pouring, leveling and scientific maintenance, with high degree of production automation and many specifications and varieties.