How to adjust the car handbrake if it is too loose? Can you adjust it yourself?

Take Honda as an example to explain how to adjust the handbrake. Friends who drive Honda will know that the hand brake that has been used for a long time will be lifted very high due to the wear of the brake pads. And the material of the steel wire. We know that steel wire is elastic, and it will stretch longer and longer after being stretched for a long time, so the handbrake will naturally stretch more and more loosely. How can I put down the handbrake? Generally speaking, the adjustment is not in the gearbox or under the chassis. Today, we will take Honda as an example. Honda's gear is adjusted in the gearbox. First, we can remove the glue next to the gear and see what it looks like inside. After taking it off, we can see that there is a switch inside. But if you want to adjust it, you must remove the whole plastic box and adjust the handbrake a little later.

After disassembly, we will see the complete structure of the handbrake. First, we will see two wheels. There are also two cables connecting two wheels, one wheel and one cable. The handle of this handbrake is used to pull two wires, and we can also see a screw to adjust the height of the handbrake. After adjustment, the height of the handbrake can be adjusted according to actual needs.

However, there is still a note when adjusting, and it is necessary to push the rear wheel of the car upward. In order to see if the rear wheel is turning, if the rear wheel can't turn, we must loosen this screw until the rear wheel can turn. Because if it is adjusted too much, it will easily lead to car tires locking and accidents.

Master summary: So, this is how the handbrake is adjusted at home today. I believe many drivers and friends will find it very simple! This is really simple, but every car has different parts to adjust, but don't be sad. The parts to be adjusted are the two parts just edited. When adjusting, you must pay attention to jacking up the rear wheel. Do you know about this? If you learn, you can save a lot of maintenance costs!