First of all, answer your question about used cars. To buy a second-hand car in Jingmen, I suggest you go to "Jingmen Paper Crane Second-hand Car Shop", where the vehicle resources are rich and the reputation is good.
20 13 Matters needing attention in the third exam of new subjects
1, subject 3 test mileage requirements:
The test mileage of large and medium-sized buses shall not be less than 20km, including10km during the day and 5km at night. The test mileage of tractors, city buses and large trucks shall not be less than10km, of which the test mileage shall not be less than 5km during the day and 3km at night. The test mileage of small cars, small automatic cars, low-speed trucks and small automatic buses for the disabled is not less than 3 kilometers, and no less than 20% of vehicles are selected for night test; If you don't take the night show, you have to take the simulated night show lighting test.
For large buses, tractors, city buses, medium-sized buses and large trucks, the traffic administrative department of the provincial public security organ shall increase the content of driving tests for complex roads such as mountains, tunnels and steep slopes according to the actual situation. For other vehicles that are allowed to drive, the traffic management department of the provincial public security organ may increase the examination content according to the actual situation.
2, subject three exam operation requirements:
1. Getting ready: Go around the car, observe the appearance and surrounding environment of the car, and make sure it is safe. Observe the traffic in the rear before opening the door.
2. Start: Before starting, check whether the door is fully closed, adjust the seat and rearview mirror, fasten the seat belt, check the parking brake and gear, and start the engine. Check the instrument, observe the inside and outside rearview mirrors, observe the traffic situation in the rear, turn on the turn signal, put in gear, release the parking brake and start. The starting process is smooth, no hurry, no backward sliding and no flameout.
3. Straight-line driving: reasonably control the speed according to the road conditions, use the gear correctly, keep straight-line driving, keep a proper distance from the car, observe the inside and outside rearview mirrors in time during driving, and keep your eyes away from the driving direction for no more than 2s.
4. Shift operation: According to the road conditions and vehicle speed, the shift is reasonable, and the shift is timely and smooth.
5. Lane change: Before changing lanes, turn on the turn signal correctly, observe the traffic situation on the rear road through the inside and outside rearview mirrors, change lanes after confirming safety, and turn off the turn signal after changing lanes. When changing lanes, judge the safe distance of vehicles, control the driving speed, and do not interfere with the normal driving of other vehicles.
6. Pull over: Turn on the right turn signal and observe the rear and right traffic conditions through the inside and outside rearview mirrors. Slow down, turn right and stop smoothly. Tighten the parking brake and turn off the turn signal. After parking, the car body is within 30cm from the right edge line of the road or the edge of the sidewalk.
7. Go straight through the intersection, turn left at the intersection, turn right at the intersection: observe the traffic situation reasonably, slow down or stop, choose the relevant lane according to the driving direction of the vehicle, use the turn signal correctly, and adopt the correct operation method according to different intersections to pass the intersection safely.
8. Crossing the crosswalk: slow down, observe the traffic conditions on both sides, and after confirming the safety, reasonably control the speed to pass. In case of pedestrians, stop and make way.
9. Passing through the school area: slow down to less than 30km/h in advance, observe the situation, be polite and courteous, and ensure safe passage. In case students cross the road, they should stop to make way.
10, passing through the bus station: slow down in advance, observe the dynamics of bus entering and leaving the station and passengers getting on and off, and pay special attention to whether there are pedestrians crossing the road in front of the bus in the same direction or behind the bus in the opposite direction.
1 1. Meeting: correctly judge the meeting place. When the passing car is in danger, control the speed, avoid in advance, adjust the meeting place, and keep a safe distance from the other car when passing.
12. Overtaking: Before overtaking, keep a safe following distance from the overtaken car. Observe the traffic situation on the left side, turn on the left turn signal, choose a reasonable opportunity, honk the horn or alternately use the far and near lights to overtake the left side. When overtaking, the side head should observe the dynamics of being overtaken and keep a safe lateral distance. Turn on the right turn signal after overtaking, and gradually drive back to the original lane and turn off the turn signal without affecting the normal driving of the overtaken.
13, U-turn: reduce the speed, observe the traffic situation, correctly choose the place and time of U-turn, and turn around after giving the U-turn signal. When turning around, it will not hinder the normal passage of other vehicles and pedestrians.
14. Driving at night: Turn on the headlights before starting. Use lights correctly when driving. High beam is used for roads with no lighting and poor lighting; Use low beam lights when overtaking, turning at intersections and following cars at close range on a well-lit road. When overtaking, passing through sharp bends, slopes, arch bridges, crosswalks or intersections without traffic lights, you should alternately use far and near lights to signal.
Hope to adopt, thank you!