Manufacturing technology of resin sculpture
I. Preparatory work
Prepare a rod scale (5 kg scale), seasoning bucket (or plastic basin), bibimbap (or bamboo chopsticks) and small spoon (plastic, aluminum or porcelain spoon).
Second, mixed materials.
According to the size of the mold and the number of products produced, the unsaturated resin is weighed, poured into the seasoning barrel, and then the curing agent is added according to the ratio of accelerator. First, add curing agent to unsaturated resin, fully stir, then add accelerator, then dilute, and then add materials according to the required color (the amount of pigment can be increased or decreased according to different varieties until it reaches the required level). Generally, a large amount of pigments can be used. ) When adding the pigment, dissolve the pigment with resin, stir it inside, and pour it into a bucket for full stirring. Add the bottom material after stirring, and add it to the required degree while stirring. (The prepared mixed slurry should be thick, so that it can flow slowly after being scooped up with a spoon. )
Third, reverse mold.
The mold should be square and flat, and the inner surface of the mold should be cleaned up before pouring. When pouring, pour the slurry with a small spoon, not pour it. Pour from the highest point and let it flow naturally, so that bubbles can be squeezed out, otherwise there will be pores after the finished product. Be careful not to overflow the periphery of the mold when pouring it into the mold. After pouring out the periphery, it should be cleaned and removed immediately, otherwise it needs to be processed and polished after molding. The slurry can be solidified after being poured into the mold for 1-2 hours, and can be demoulded after being solidified.
I believe that through the introduction of Bian Xiao, everyone has already understood the production process of resin carving. The content of resin carving is very flexible, from people, animals to flowers and plants, as long as you can think of the image, resin carving can be done. In terms of color, resin handicrafts also have a relatively large span, such as imitation crystal and agate. Therefore, the plasticity of resin sculpture is actually great, and there is still a lot of room for development. I believe that resin handicrafts will be widely used in the future home improvement industry.
Tubatu Online provides you with "every decoration quotation, 1-4 local decoration companies, 3 sets of decoration design schemes" and the decoration pit avoidance strategy for free! Click this link:/Zhu Ye /zxbj-cszy.php? to8to _ from = SEO _ zhidao _ m _ jiare & amp； Wb, you can get it for free ~