Self-inspection report on production safety hazards of enterprises 1
20__ Deyang Fengchuntang Pharmaceutical Co., Ltd. Annual Safety Inspection Report Recently, major accidents occurred in Ansheng production all over the country, which sounded the alarm for our company's safety production work. In combination with the spirit of thoroughly implementing the "County-wide Work Conference on Work Safety" of the county party committee and government, we should earnestly do a good job in work safety and effectively prevent and resolutely curb accidents. The company should check the implementation of safety responsibilities and systems, safety publicity, education and training, the implementation of safety responsibilities and hidden dangers, and the formulation and drills of emergency plans in accordance with the relevant requirements of safety production. The specific contents of the self-examination are as follows:
First, strengthen organizational leadership and further improve the management level of production safety.
Our company has set up a leading group for safety production self-inspection with Chairman Li Yong as the team leader, Manager Wei Liu as the deputy team leader, and department heads as members. And fully and seriously study the implementation plan to ensure the authenticity of the self-inspection and ensure that it is responsible for the company. Unified leadership, unified arrangement, unified deployment and implementation. To study and decide to solve the problems existing in the investigation and rectification of production hidden dangers and coordinate the rectification work. Conduct a comprehensive and detailed investigation and rectification of all hazards of the company, as well as drug production, inspection and storage.
Second, the inspection focus:
1. Warehouse: the environment for storing raw materials and finished products;
2. Quality Department: Chemicals and drugs that may be confused should be stored in different regions; The public security department should strengthen the monitoring and management of dangerous chemical reagents and put them on record.
3. Production workshop: Operators conduct standardized operation and management according to GMP requirements.
4. Office building: responsible for carefully checking the power cord, fire hose, fire fighting equipment, fire escape, etc.
Third, check the content.
The person in charge of each department organizes the personnel of this department to conduct self-examination and hidden danger investigation, and check the implementation of each link, post and safety measures.
Fully implement the safety production standards of pharmaceutical industry, standardize and improve safety management, and improve the production level of enterprises; Improve various safety rules and regulations and requirements, and find out the hidden dangers such as the implementation of post responsibilities, infrastructure, technical indicators, environmental conditions and prevention and control measures. Specifically, it includes the following contents:
Implementation of the responsibility system for production safety: the person in charge of the enterprise and the person in charge of safety sign the responsibility book, and the person in charge of safety signs the responsibility book with the implementer to ensure that the responsibility is implemented to everyone.
Enforcement of safety production laws and regulations: according to relevant laws and GMP requirements, implement safety measures of various departments. In production, inspection and storage, alarm and fire fighting equipment should be equipped, and anti-static and explosion-proof devices must be installed in key parts of the equipment.
Investigation and rectification of hidden dangers: monitor and respond to major hazards, important equipment and links, and establish investigation and rectification of hidden dangers. Flammable raw materials and packaging materials shall be recorded.
Four. Implementation of safety system and responsibility
The company's safety production management system is completely filed, all systems are sound, the emergency plan is complete, the drill is feasible, the assessment effect of various operating procedures is good, and cadres and workers at all levels consciously abide by the contents of the systems and procedures, and there is no violation.
The person in charge of each team has a strong sense of safety in production, conscientiously implements the ideas of "prevention first" and "everyone is responsible for safety in production", and employees earnestly perform their respective safety responsibilities in their posts, which provides a strong guarantee for the implementation of various measures for safety in production.
Five, continue to increase publicity and education, and enhance the awareness of workers' safety in production.
According to the overall arrangement of the superior leaders, the company organized various forms of missionary activities. First, through the convening of safety production meetings and other forms, in-depth legal education, publicity and study of the "Safety Production Law" and other laws and regulations. The second is to enrich the forms of publicity activities, organize employees to carry out safety knowledge education, participate in fire safety drills, and publicize all kinds of safety knowledge and safety regulations by billboards, banners and slogans. So that the majority of employees have a profound understanding of safety, safety has a wide range of concerns, greatly improving the safety awareness of all employees.
Through various forms (warning signs, billboards, slogans, etc. ), clear the hazards and preventive measures existing in the employee's post, and clear the rescue measures when the hazards occur. Train employees to master the emergency handling skills of small industrial injuries and keep the injuries to a minimum. Enable employees to skillfully use labor health protection articles, reduce occupational hazards and prevent the occurrence of occupational diseases. So that employees can correctly and skillfully take self-help and mutual rescue measures in sudden accidents.
VI. Implementation of safety responsibilities and rectification of hidden dangers
Maintenance records of equipment, pipelines, safety protection devices and protective facilities such as platforms, ladders, guardrails and supports are complete and effective. The surfaces of equipment and pipelines shall be clean, free from damage, cracks and leakage, and all valves and instruments shall be normal. All kinds of fire safety facilities are complete, qualified and effective, and the operators are required to wear labor protection articles.
The installation and maintenance of electrical equipment should be operated by electricians. Non-electricians are not allowed to decorate electrical equipment and lines. Accident-prone electrical equipment should be managed by special personnel, and the responsibility should be implemented to people. Electricians can be equipped with labor protection articles according to regulations, operate according to operating procedures, and regularly check the lines and all electrical equipment. All high-pressure dangerous places are equipped with protective facilities and warning signs. Non-electrician operators are strictly prohibited from entering the guardrail of the distribution room or electrical equipment, pulling and hanging it privately, and approaching high-voltage dangerous places.
In view of the weak links and possible problems, conduct a comprehensive investigation seriously, focusing on checking whether the safety system is implemented, whether the safety measures are in place, whether the safety protection facilities and equipment are complete and intact, and whether the hidden dangers are rectified.
Seven, emergency plan formulation and exercise.
In order to prevent unexpected accidents, the company conducts at least 1 time study on the emergency plan for its employees every year, and on the basis of the study, simulates the fire drill of sudden fire according to the particularity of the company's production. During the drill, the ability of employees to deal with emergencies, the investigation and handling of emergencies and the self-protection measures of personnel were emphatically investigated. Through on-site emergency plan drills, the safety awareness of employees and managers will be improved, so that employees can clearly understand the importance of safe production, enhance their ability to respond to emergencies, gradually improve and perfect emergency rescue plans, and improve emergency handling and on-site rescue skills. Our company has found no major safety hazards through the self-inspection of safety production, but it will never take it lightly. We will conduct regular and irregular inspections on safety production to ensure that no accidents will occur during the Spring Festival.
Self-inspection report on hidden dangers of production safety in enterprises II
In accordance with the requirements of the Notice on Concentrated Special Actions for Safety Inspection and Rectification, we will carry out self-examination and self-correction activities for enterprise safety production. The leaders of our company attach great importance to it, actively organize relevant personnel to do a good job in organizing and launching, and seriously carry out self-examination and self-correction, leaving no dead ends. In view of the existing problems and weak links, according to the principle of fixed personnel, fixed time, fixed measures and fixed funds, the rectification plan is formulated, and the rectification measures are implemented to prevent accidents. The self-inspection situation is summarized as follows:
First, strengthen management and clarify responsibilities.
In order to effectively strengthen the leadership of our company's safety production work, the company has adjusted and enriched the company's safety production work leading group, striving for clear goals, implementation of responsibilities, and work in place to prevent problems before they happen.
Second, detailed measures, put in place
Fully implement the policy of "safety first, prevention first" and the spirit of documents related to safety production of divisions and regiments, adhere to management according to law, strengthen supervision, strictly check, urge rectification, eliminate hidden dangers and control accidents. Focus on supervision, put an end to general safety accidents, put an end to serious safety accidents, and ensure the safety of employees' lives and property.
Third, whether the work content and measures are appropriate.
1. Strengthen the publicity and education of safety knowledge, and strive to improve the safety awareness of all employees in the company. Conscientiously carry out publicity and education on safety production laws, regulations and policies, advocate and do a good job in safety culture construction, and enhance employees' awareness of safety production. In accordance with the relevant requirements, our enterprise actively sends personnel to participate in the safety training and retraining organized by the higher authorities, earnestly pays special attention to the training of employees' knowledge and skills of safety in production, and strives to ensure that the certificate-holding rate of special operations personnel and employees reaches 100%.
2. Strengthen safety responsibility management and establish and improve various rules and regulations. The first person responsible for the safety work of this unit is the person directly responsible for the safety production work of this unit, and must earnestly perform their duties, strengthen supervision and inspection, eliminate all kinds of safety hazards in time, and prevent all kinds of safety accidents. First, earnestly implement the responsibility book for target management of safety production signed with the company, so as to have posts, positions and responsibilities. Second, the company's production safety leading group regularly organizes personnel to inspect and supervise the implementation of various departments and register the situation as the scoring basis for the year-end comprehensive assessment. Third, all units should formulate and improve various safety production rules and regulations according to their own reality, and strictly implement them, put an end to the phenomenon of "three violations", and earnestly ensure that safety production has rules to follow.
3. Conduct a comprehensive safety inspection. The enterprise safety production leading group organizes a comprehensive safety production inspection every quarter, urges the workshop to formulate rectification measures, implements funds, arranges special personnel to supervise the rectification, and records the hidden dangers investigation and rectification; Each workshop and safety responsible unit shall organize a safety inspection once a month, find hidden dangers, formulate measures, designate special personnel, make rectification within a time limit, and report the situation to the enterprise safety production leading group in time.
Four, the existing problems and deficiencies and rectification
A, shall not use homemade hook.
Second, it is not allowed to connect welding hooks (mainly on the gates and columns on the first floor).
The third is the local deformation of the escalator on the second floor of the workshop.
Four, wood motor nylon rod should be replaced.
Five, the sorting area is messy, and the silicon bags should be placed in the machine repair workshop and collected and used quantitatively every day.
Six, distribution box piled up sundry.
Seven, don't wear goggles, overalls, masks when stopping the furnace.
Five, in view of the above problems, in the next step, we should strengthen measures, urge the workshop to rectify on time, review on time, track the rectification, ensure the rectification in place, and put forward the following points:
First, put the silicon bag into the machine repair shop and collect it for use every day. Ensure that the finishing area is not messy.
Secondly, the nylon rod of the wood-beating motor and the workshop escalator should be inspected, maintained and replaced regularly by the mechanic.
3. The installation and maintenance of electrical equipment should be operated by electricians, and the lines and all electrical equipment should be checked regularly.
Four, the workshop transformer room circuit needs electrician to check regularly, to ensure that the circuit is clean and tidy.
5. The power distribution cabinet on the second floor of the workshop needs to be replaced and locked.
Six, strengthen the understanding of the importance of wearing goggles, overalls and masks, and establish a sense of safety in production. Conscientiously implement the responsibility system for production safety.
Seven, it is forbidden to shop welding and hanging, to ensure the specification of the workshop.
Under the self-examination and self-correction of "cracking down on illegal activities" and "investigating hidden dangers", our company attaches great importance to further improving the safety hidden dangers of enterprises and employees, which have been effectively eliminated. The workshop has been rectified quickly according to the rectification opinions put forward, and the whole self-examination and self-correction work has achieved good results.
3. The enterprise production safety hidden danger inspection report
According to the general requirements of the district party committee, district government and Nanning sub-district office for work safety in the past 20 years, Jinniu Community has always adhered to the working principle of "people-oriented, safety first, prevention first and comprehensive management", further implemented the responsibility for work safety, strengthened safety supervision, paid close attention to the investigation and management of hidden dangers, actively carried out various work of work safety, and realized the basic stability of the work safety situation in its jurisdiction. The 20__ year work safety inspection report is as follows:
(1) Strengthen organizational leadership and improve system construction.
In order to conscientiously implement the spirit and requirements of Nanning Sub-district Office on work safety, Jinniu Community established a leading group on work safety, established and improved various rules and regulations on work safety, and fully implemented the supervision responsibility of Nanning Sub-district on work safety.
(2) Hold regular safety meetings and make all work arrangements.
According to the requirements of the special goal of Nanning street safety work throughout the year, the community will decide every month
Hold regular meetings on production safety in time, timely convey the spirit and requirements of the higher-level meeting, analyze and study the current situation of community production safety, carefully analyze emergency response, report safety accidents, formulate targeted solutions according to specific conditions and implement them immediately.
(3) Strengthen information submission and establish a standardized management system.
Jinniu community strictly abides by the duty system of daily and major holidays and responds to emergencies in time. In the process of safety inspection and review, make inspection records, report safety work reports regularly, and submit safety work information in time. Earnestly implement the main responsibility of production safety, and carry out community in the area in April and October.
In order to crack down on the illegal production, sale, storage and illegal discharge of fireworks and firecrackers, a comprehensive investigation was carried out on the places where fireworks and firecrackers may be illegally produced and stored within the jurisdiction, and the licensing conditions and storage conditions of fireworks and firecrackers operators were carefully inspected. The potential safety hazard was eliminated in time. At the same time, a comprehensive inspection was carried out on the industrial sites such as buildings, dangerous chemicals and special equipment within the jurisdiction. Among them, hotels 1 15, 39 hidden dangers, 36 on-site rectification, 3 rectification within a time limit, 39 entertainment places, 25 hidden dangers, 3 rectification within a time limit, 35 restaurants, 9 hidden dangers, 2 rectification within a time limit, 2 passenger stations, 2 rectification within a time limit, 6 auto repair shops and 2 hidden dangers. Rectification within a time limit 1 home, found 2 ironwood processing enterprises, closed for rectification 1 home, inflammable and explosive 1 1 home, found 7 hidden dangers, rectified 5 on the spot, rectified 2 within a time limit, found 4 hidden dangers, and rectified 1 home within a time limit.
Through the development and implementation of safety production work, the potential safety hazards in the jurisdiction were discovered and eliminated in time, the occurrence of safety accidents was effectively prevented, the main responsibility of safety production in all production and business units in the jurisdiction was further implemented, and the realization of annual safety production objectives and tasks and economic work objectives and tasks was effectively guaranteed.
4. The enterprise production safety hidden danger inspection report
According to the spirit of document Yu [20 _] No.8 of Yufeng District Safety Production Committee, community leaders attached great importance to it and carefully organized and planned the May 1 holiday and the safety inspection activities in May. The safety production activities were carried out smoothly and no safety production accidents occurred.
1.On April 12, the community held a special meeting on safety in production. Comrade Huang You, deputy director in charge of safety production, preached the main points of safety production in Yufeng District in 2008, emphasized the great significance of signing the responsibility book for safety production and fire safety, and made specific arrangements. Gao Jingfu, community director, and Jiang Hong, who is in charge of safety work in Wu Liting Sub-district Office, also spoke at the meeting respectively, further emphasizing the importance of safety production. After the meeting, eight production enterprises under their jurisdiction signed a responsibility letter for production safety and fire safety, and delivered the signed responsibility letter to the community summary sub-district office on April 24.
2. On April 25th, at the joint meeting of family planning, safety inspection and patriotic health work held by 18 resident community units and district directors, Huang You, deputy director of the community, read out the document "Yu' An Zi [] No.8" of Yufeng District Safety Production Committee again, as well as the work plan of May Day and safety inspection, and issued relevant documents and materials, which further aroused,
The third is to organize community workers to conduct two major inspections.
On April 30th, 1 year, Gao Jingfu, director of the community, personally led the inspection team to conduct safety inspection on eight production enterprises in the area under his jurisdiction, recorded the on-site inspection of safety production, and immediately asked the enterprises to rectify if any potential safety hazard was found. Wen, deputy director of the community, and Li, deputy secretary of the community party Committee, respectively led the inspection team to conduct a major inspection of the health and fire safety of the living quarters, and put forward requirements for immediate rectification of environmental health problems and fire hazards.
2. On May 19, a 3-member inspection team composed of Huang You, deputy director, conducted routine safety inspection on the production enterprises in the area again, and inspected the implementation of the work plan arranged by the community in May one by one. If deficiencies are found, rectification is required within a time limit.
Fourth, according to the key contents of the safety inspection conducted by the Yufeng District Safety Committee in May, the leaders of subordinate units in the jurisdiction can attach great importance to it and carry out their duties, and the safety production forms a routine system once a month, once a day and once a time. In the whole inspection activity in May, the outstanding special contents are as follows:
1, Wuling Liuji marked traffic route signs on the main motor vehicle trunk roads in residential areas before May Day, which played an important role in warning the safety of motor vehicles and pedestrians.
2. On the main road in front of Lieutenant Colonel 24, the school places safety signs on the main road three times every morning, noon and evening to control motor vehicles to avoid or pass slowly to prevent safety accidents.
3. Xinyuan Kindergarten Center has formulated emergency plans for fire prevention, food poisoning prevention and hijacking prevention, and conducted an educational fire prevention, air defense and escape drill (with video materials) before May Day.
4. Axle Auto Parts Co., Ltd., Luowei Electric Power Co., Ltd. and Yitong Foam Co., Ltd. have specially issued safety production bulletins, which further enhanced employees' safety awareness.
In the safety inspection activity in May, Yitong Foam Plastic Co., Ltd. made detailed plans and arrangements from organization to responsibility implementation and on-site implementation, which made the whole activity unique from beginning to end.
6. Liuji Factory conducted special safety education and training for 122 new employees and temporary workers.
7. The eight production enterprises that signed safety production and fire safety all wrote safety inspection summaries as required.
Five, the safety inspection activities, the leaders of all units attached great importance to, so that the inspection work smoothly, no safety accidents. Of course, there are also some units that do not pay enough attention to safety inspection and their safety thoughts are not strict enough. It is necessary to continue to carry out safety education in the future.
5. Enterprise safety production hidden danger self-inspection report
In order to effectively strengthen the management of production safety and construction, and resolutely curb the occurrence of construction safety accidents, we organized a special self-inspection of production safety, and combined with the actual situation of the project, carried out a special safety inspection and self-inspection of the project department, mixing station and construction teams, eliminating the existing unstable safety hazards. The details are as follows:
I. Purpose of the investigation
Through investigation, the potential safety hazards and weak links of safety management in the construction site are found in time, and effective measures are taken to eliminate potential accidents and solve problems in safety management, so as to effectively improve the level of safety production in the construction site, resolutely curb the frequent occurrence of construction safety accidents and prevent the occurrence of safety accidents.
Second, organize and lead.
The project department has set up a leading group for the investigation of hidden dangers in production safety with the work safety office as its main task: _ _ deputy head: _ _ member: _ _ person.
Third, the investigation work arrangement
The investigation work mainly focuses on the following aspects:
(a), safety education for workers, to inspect the scene, to find out the situation is summarized, and notify the team rectification.
(2) Conduct comprehensive and centralized investigation, establish a ledger for investigation and rectification of potential safety hazards, carry out rectification according to the principle of "three determinations" and conduct re-examination.
(3), supervise the hidden dangers that have been found out, ensure that the rectification does not go through the motions, establish a ledger for the newly discovered hidden dangers, and follow up the implementation.
Fourth, the content of the investigation
According to the laws, regulations and standards related to safety production, conduct a comprehensive investigation on the construction site, and combine the relevant requirements of the Regulations on the Investigation and Management of Safety Accidents in Xinjiang Uygur Autonomous Region and the characteristics of many safety accidents that have occurred this year to achieve the unity of entity and behavior. It is necessary to find out the hidden dangers of on-site entities and point out the problems existing in safety management, focusing on the investigation:
1. Safe behavior:
(1) Strengthen the issuance of safety production licenses and the assessment and implementation of safety responsibilities;
(2) Further improve the safety management organization and equip full-time safety management personnel: conduct "three-level safety education" for employees. Strengthen the publicity and popularization of fire safety knowledge and the construction of amateur fire brigade; Designated personnel shall check the fire at the site every day and record it.
(3) Check the implementation of major safety management responsibility systems such as safety responsibility system, safety technical disclosure, safety inspection, and rectification of potential safety hazards.
(4) Strengthen the implementation of safe and civilized construction.
(5) Improve the preventive monitoring measures and emergency plans for major hazard sources on the construction site;
(6) Supervision and inspection of safety protection articles, safety protection facilities and special operations personnel with certificates.
2. Field entities
Check the implementation of relevant national safety codes and standards, mainly including the following contents:
(1) Whether the environmental conditions, configuration and use management of fire-fighting facilities in key places such as canteens, staff dormitories and warehouses of materials and equipment meet the requirements of fire safety, and whether the fire-fighting persons and fire-fighting measures are implemented. (Summary of Teachers' Continuing Education)
(2) Safety status of construction machinery and vehicles.
Mainly in accordance with the relevant provisions of the notice of the Executive Board to carry out the investigation, use management and registration of construction safety hazards, including:
Check the technical parameters and daily maintenance of construction machinery vehicles;
Check the implementation of the initial registration and use registration system of construction machinery vehicles, and prohibit the use of construction machinery vehicles that are not registered according to regulations in the construction site;
Check the safety management of construction machinery and vehicles in use, put an end to illegal command and operation, and ensure safety:
(3) Safety management of dangerous projects. Whether the safety technology and safety protection measures are put in place.
(4) Equipment and use of "three treasures" protective articles (safety helmet, safety belt and safety net).
(5) The safety status of temporary electricity utilization and hidden dangers in production safety. Whether the temporary power lines on the construction site are set according to the specification requirements, and whether the temporary power management meets the relevant regulations.
(6) Check the work of "Safe Production Month" carried out in the early stage of the construction site.
Verb (abbreviation for verb) check results
(1) The inspectors will decisively deal with the potential safety hazards or problems found, and issue a "rectification notice" in a timely manner in strict accordance with relevant regulations when problems are found. Those who fail to make rectification within the time limit or fail to pass the examination after rectification will be stopped and punished.
(two) in the process of investigation, highlight the key points, strengthen supervision, strengthen supervision and inspection of key areas, key parts and key links, and combine the investigation and rectification of hidden dangers with daily safety production management.
(three) found hidden dangers, rectification within a time limit, review and acceptance; At the same time, in accordance with the principle of "who checks, who is responsible", the major hidden dangers are supervised and tracked, and the safety supervision duties are earnestly performed.
Work requirements of intransitive verbs
(a) the project department to strengthen the management of production safety, increase safety investment, promote safety technical transformation, consolidate the foundation of safety management, improve the standardization management level of construction safety quality; At the same time, it is necessary to formulate measures, implement responsibilities, and conscientiously do a good job in self-examination and inspection of potential safety hazards. For major security risks, we should implement the "five implementations" of remediation responsibilities, remediation measures, remediation funds, remediation deadlines and emergency plans one by one; In the process of investigation, the project manager and chief supervision engineer must be in place, record the self-inspection results and work conditions, and actively cooperate with the higher authorities to check the hidden dangers of production safety and summarize five compositions.
(two) all relevant units and departments should implement the system of rewards and punishments for production safety, and report the rewards to all aspects of production safety in a serious, solid and effective way. If the investigation is not in place, the concealment is not reported, and the rectification is not thorough, especially if the investigation and rectification of hidden dangers are not in place, dereliction of duty and omission of major safety hazards have serious consequences, the responsibility of relevant personnel should be seriously investigated according to law.
(3) Fill in the safety hazard investigation and management form in time, and file the safety hazard supervision and safety hazard rectification report.
Six self-inspection reports on hidden dangers in production safety of enterprises.
In order to conscientiously implement the spirit of the Special Action Plan for the Investigation and Management of Safety Hidden Dangers issued by the Transportation Bureau, fully implement the company's responsibility system for production safety, strengthen the unified leadership of the company's production safety work and the investigation and management of safety hidden dangers, and effectively improve the company's production safety level, the company has done a lot of meticulous work.
First, strengthen passenger safety rectification work. During the special rectification action, the company centralized safety management personnel to conduct centralized inspection on all operating buses. More than 10 vehicles with unsafe factors should be stopped immediately for maintenance, and road inspection should be strengthened. Check the illegal behaviors such as speeding and fatigue driving on the road, criticize and educate the three cars found speeding on the spot, and conduct a comprehensive inspection of the fire extinguishers on board, which greatly reduces the accident rate.
The second is to strengthen the fire safety work of all departments of the company. During the special rectification action, the company inspected the factory, garage, stores, long-distance passenger stations and other places one by one, focusing on whether the safe passage was smooth and the fire-fighting facilities were in good condition, which effectively improved the company's ability to defend against fires.
The third is to hold a safety production meeting and carry out education and training. In view of the fact that there are many departments, vehicles and drivers in the company, and there are great safety hazards, the company held two safety meetings in succession, conducted comprehensive safety education for them, implemented the spirit and requirements of special governance actions, and required employees to actively carry out self-inspection activities, which greatly improved the safety awareness of drivers and passengers.
Fourth, increase publicity, create a safe production atmosphere, and establish a firm safety concept for employees. On the occasion of special governance activities, the company launched a massive publicity campaign, posting slogans and hanging warning banners. In order to improve employees' awareness of safety in production and motivate employees.
Hard work pays off and special rectification actions are carried out. The company actively carried out various safety production inspections, rectified potential safety hazards, and the accident rate dropped significantly, which made the company's safety production work reach a new level.
7. Enterprise safety production hidden danger self-inspection report
According to the unified deployment and arrangement of the county safety Committee, my township has seriously carried out the investigation and management of potential safety hazards. Since the beginning of February, a special campaign to investigate and manage potential safety hazards in key industries has been carried out in the township, and positive results have been achieved. The situation is summarized as follows:
First, pay attention to ideas and make strict arrangements.
After the township safety committee issued the "Notice", the main leaders of the township attached great importance to it, and repeatedly asked the township safety supervision office to correctly understand the grim situation faced by the current safety production in our township according to the requirements of the superiors, and fully understand the importance of the city and district to deploy this special action for the investigation and management of hidden dangers. And set up a special action group for the investigation and management of hidden dangers in production safety with the township head as the team leader, and formulated an implementation plan for the special action for the investigation and management of hidden dangers in production safety in villages. The security inspection department, together with industrial and commercial offices, police stations and other township-related departments, has carried out a massive investigation and management of hidden dangers in production safety. To find out the hidden dangers in production safety, issue a notice of rectification of hidden dangers and treat them within a time limit. For major hidden dangers that need to invest a lot of money, adopt an early warning mechanism, list rectification plans and capital plans, and report them to relevant departments for study and determination of rectification plans.
Second, elaborate organization and earnest development.
In order to do this activity well, the special action group for investigation and management of hidden dangers in production safety specially held a mobilization meeting for the special action for investigation and management of hidden dangers in production safety. At the meeting, the leaders made an important speech on the special action for the investigation and management of hidden dangers in production safety, unified their ideological understanding, made clear the situation and tasks, and called on the members of the action team to earnestly perform their duties, cooperate closely, divide their work and cooperate in a unified manner, and properly handle the problems in the rectification work in time, which set off a huge upsurge in the investigation and management of hidden dangers in production safety in the whole town. In this activity, more than 30 enterprises in the township were investigated, 35 hidden dangers were found, 35 rectification instructions were issued, 2 enterprises were ordered to rectify within a time limit, and 35 hidden dangers were ordered to rectify, with a rectification completion rate of 98%.
Three, regular review, consolidate the results
Through the development of this special action to investigate the hidden dangers of production safety, we also deeply realize the great significance of production safety to enterprises, society and the country. Safety work is a major event that benefits the country and the people. To this end, we have increased safety investment and hidden dangers management, and regularly reviewed relevant enterprises or units to consolidate existing safety achievements.
In the future, we will, as always, tighten the string of safety, insist on regular self-examination and self-correction of enterprise safety production, take safety production as an important cause, form a long-term mechanism of safety production within our jurisdiction, strengthen safety education, optimize production technology, strengthen safety production management in all directions, realize enterprise safety standardization at an early date, ensure safety production, and make new and greater contributions to the healthy and orderly development of enterprises and social harmony, stability and progress.
Township safety supervision office
Articles related to the self-inspection report on hidden dangers in production safety of enterprises;
★ 20 17 safety inspection report
★ Self-inspection report of safety production inspection
★ Safety production inspection report (3)
★ 3 samples of enterprise safety self-assessment report
★ Excellent model essay selection for unit self-examination and self-correction report (2)
★ Selected model essays of standardized self-assessment report on safety production.
★ Model essay on self-inspection report of units and departments.
★ 5 sample reports on enterprise safety production rectification.
★ Summary of self-inspection report on personal safety work
★ Summary of annual safety inspection report