Suggestions on the renovation of  Runge decorative industrial workshop.

First, the rational layout and use of functions is the primary purpose of scientific division according to the specific practical area. Generally, the workshop area is large, so the distribution of personnel and the reservation of ventilation and fire exits should be considered when dividing the use functions.

Second, the fire approval For the sake of safety, we must not ignore the installation of fire-fighting equipment. Before installing fire-fighting facilities, we need to go to the local fire station for acceptance. After the project is completed, we need to report for approval.

Generally, it takes about 10 days to complete the fire control examination and approval procedures, so it is necessary to consult the fire control company on this project before decoration.

Third, the choice of partitions In the decoration process, some areas often need to be reasonably divided into different functional areas, so it is necessary to divide them with partitions of different materials. At present, the commonly used partitions are: light steel keel gypsum board partition, stainless steel glass partition, aluminum-plastic plate tempered glass partition and pure tempered glass partition. These partitions can play the role of division, but represent different styles and prices. Among them, the light steel keel gypsum board partition wall has low cost and is often easily accepted.

Fourth, the choice of ground materials is very important, because there is a lot of wear and tear every day, try to choose some durable materials. If a ground-bearing workshop is needed, it is best to lay a layer of concrete on the original ground. For some factories that need anti-static, anti-static floor or anti-static pvc material should be laid on the ground. There is also a more wear-resistant floor material called "terrazzo floor", which is more economical and practical. However, with the emergence of new floor materials in factories, this product has not been widely used.

5. The top material is not determined by mineral wool. The sound-absorbing board and calcium silicate board are commonly used materials in factory decoration. These materials are low in price, low in ignition point and simple to manufacture, and are usually recognized by consumers. It is worth noting that no matter what kind of material is used as the top material, it needs to be mainly coordinated with fire protection facilities. Usually, the ceiling keel is made first, and then the pipeline facilities for spraying and smoke exhaust are installed in the fire fighting project, and the fire fighting facilities are carried out after all the ceiling materials are capped.