A logistics company engaged in chemical transportation logistics personnel, must master the relevant chemical knowledge, understand the physical and chemical properties of the chemicals they often carry. Before transportation, you should ask about the physical and chemical properties of the goods, such as the specific gravity, flash point, toxicity and expansion coefficient of the products. In summer, the car should be equipped with shed poles and arbor, and it should be ventilated to avoid light, especially to prevent direct sunlight. In addition, you should bring a few sealing rings on the lid, one or two wet sacks, a small amount of sand, a special wrench and a dry powder fire extinguisher in case of emergency.
Second, when loading, the logistics personnel of the logistics company must be careful. The loading of bottled chemicals seems simple, but in fact it is very particular, and the loading should be even and balanced. All kinds of chemicals can't be mixed, so as to avoid chemical reaction after leakage. There should be no gap between barrels, and the gap should be filled with waste paper board or woven bag. No matter what kind of chemical products are transported, tarpaulins should be covered to prevent cigarette butts from flying off during the traffic meeting. The exhaust pipe of the vehicle should be equipped with a flame arrester, and the carriage should be covered with a layer of straw mat or reed mat to avoid slipping during driving.
Third, in the process of transportation, we should drive smoothly and safely. Drivers of logistics companies transporting chemicals should be skilled and do not smoke. When driving, use the emergency brake as little as possible to keep the goods stable.
Four, check whether there is any chemical leakage on the way. Due to the bump and vibration of the vehicle during driving, it is often easy to cause packaging damage and chemical leakage. Therefore, logistics personnel should regularly check whether the lid of the bucket overflows. Let's check whether the filler between the iron drums has fallen off and whether there is leakage around the bottom of the carriage. It is worth reminding that in the hot season, the liquid will expand, so when replacing the sealing ring, it should be opened slowly, and then opened after the gas is released, so as to avoid the emergency liquid spraying on it and hurting people.
Fifth, the driving route and time should be chosen properly. When transporting chemicals, you should choose the trunk line with smooth roads and choose the appropriate time according to the characteristics of the goods.
Six, after long-distance transportation, the outer packaging has a certain degree of damage, especially when unloading. Most chemical products are toxic and corrosive, and it is easy to pollute the environment if you don't pay attention, especially liquid products, which are easy to pollute land and water. After long-distance transportation, the outer packaging is damaged to some extent, especially when unloading. Where there is no dedicated platform, a springboard or batten should be laid, and the bucket should be slowly landed with a rope, or the waste tire should be used to pad the ground. And inform the owner that the dangerous goods should be put on hold for a period of time, and then used after the performance is stable. It is worth reminding that if there are traces of water leakage in the carriage, don't rush to clean it. Clean it with sawdust or sand, let it dry and evaporate, and then rinse it with water away from water to avoid polluting the environment.