Article 40 of the Copyright Law: Producer of audio and video recordings? Whoever uses another person's work to make a sound recording or video recording product shall obtain the permission of the copyright owner and pay remuneration.
Please give a speech by foreign celebrities! : en8848 ../action-tag-tagname-American100 voice.
Can I only record my original songs in the studio? Can I find them online? How much does it usually cost to record a song in a recording studio? The effect is very good, and you have to learn the specific operation yourself. I used this software to record songs before, which can affect my voice and remove noise. I don't recommend going to a professional recording studio. Expensive and troublesome. Using this software can also facilitate my regular recording and adjustment in the future. You can't go to the recording studio every time you want to record a song.
I have connected you with the specific download address and usage method before, and wish you success.
:shui.3322./99/03 1.htm
Can Mianyang's recording studio record original songs written by itself? It depends on the professional level. Lowest 10 yuan. In that case, the quality will be different from that of CD. There used to be a recording studio in our county, I know a little ~ ~ but if there is any good recording studio, please introduce it to me. I want to find a job like this ~'
What was the original song recorded with? It's okay, big brother. There are many softwares, such as cooledit, sonar, calf and fruit, but there are many softwares. As for usage, you can search online. Many tutorials are very simple. Learn by yourself.
Adding your own recording to a song with cool edit pro is very simple and should be obvious at a glance.
The recording studio production cost of original songs can be cheap or valuable, and there are cheap practices and expensive practices. Of course, the final result of the two will be far from each other.
If it's cheap, just find a private studio, and the recording fee can be discussed. Some small studios also charge hundreds of dollars. You're a musician of your own, so if you count it all, I think the cost should be controlled within 5000. Even if you can record hard, you can't exceed this number. Maybe 1 0,000 yuan will get it all done. It all depends on what kind of shed or studio you are looking for.
Not to mention expensive, the birth of a good song is not capped in cost.
The original song of Shijiazhuang Studio must be Qingbai culture. They are the first studio in Shijiazhuang to release an album! Baidu music "First Love", "Waiting", "Tears" and so on are all made by them.
How to avoid copyright disputes when recording original songs in the recording studio? Under normal circumstances, there is no copyright at all.
Disputes, you pay, he records, have nothing to do with copyright. Oh, my friend, it is common sense to write his name in post-production, but on the other hand, if you pay, he receives this recording, at most, it is the right of signature, and other things have nothing to do with him. Note (as for how to avoid copyright disputes, there is no payment for the manuscript or the works you jointly produced. If it is a fire, there will be problems.
How about Maya 44 sound card for recording original songs: shuziyinpin.blog. 163. /blog/static/533432 172008225 1729425/
"MAYA44 V3" professional recording sound card (preferred for recording studio, with microphone amplifier and phantom power supply)
Introduction to MAYA44 V3
Maya44v3, a 24-bit /96 kHz audio interface with 4 inputs and 4 outputs, is a complete solution for high-index multi-track digital hard disk recording. Maya44v3 has incredibly powerful and rich features. Maya44v3, with its powerful function and reasonable price, satisfies beginners who have just set foot in computer digital audio production, DJs who use pc sound system and professional music producers.
With the popularization and wide application of computer technology, digital audio system has become the mainstream trend of music production industry. With maya44v3, you can easily set up your own dtmp (Desktop Music Production).
System. Maya44v3 will be the core of your dtmp system, providing you with the professional sound quality of the recording studio. Maya44v3 also helps you step into the field of professional digital audio production.
Mentor and friend.
Maya44v3 inherits all the advantages of the old maya44. The improved AD/DA conversion is all upgraded to 24 bit/96 kHz, and the internal mixer is strengthened.
(direcire virtual connection) function, and the software control interface is optimized, so that the liquid level meter reading is more accurate. The new maya44v3 provides the expansion of mi/ODI/o daughter card.
The exhibition supports the addition of additional digital input and midi interface. Maya44v3 has a 120mw super earphone amplifier and a stable ice controller chip design. Maya44v3 is now
The most valuable digital audio interface in desktop music production system today.
characteristic
1. Analog 4-in 4-out interface
2.24-bit /96 khz Ad conversion and da conversion
3. Full duplex recording and playback
4.s/pdif coaxial and light digital output
5. Direct monitoring hardware input with zero delay.
6. Built-in 4-channel digital mixer
7. Microphone preamplifier with+12v phantom power supply
8. 125mw 320hm headphone amplification
9. Including the e-wdm driver supporting ASIO/MME/WDM/GSIF/Dire Cire3,0.
10.Mi/ODI/O daughter cards can be purchased separately, and digital audio and midi interfaces are added.
Electronic WDM driver and DirectWIRE
Audiotrak's e-wdm driver
Full driver compatibility, supporting all professional music production software.
Today's software driver technology limits the sound card to transmit the audio stream to the audio hardware for processing only through the wdm driver of Microsoft. The emergence of e-wdm driver broke the tradition of "E-WDM"
Driver-centric restrictions. E-wdm driver can control the powerful resources of cpu and provide virtual sound and effect for audio stream in real time. E-wdm driver
This formula provides maya44v3 with comprehensive driver compatibility features (including supporting drivers such as wdm, asio2.0 and gsif), and can be executed in professional music software with extremely low delay.
Work.
Direct characteristics of audiotrak
Direcire is a new driving technology, which can record any audio source and distribute digital audio stream audiotrak without audio cable connection. Using various audio drivers
(such as wdm, asio, gsif, mme, etc. ), this technology can transmit audio data inside the software. Direcire can transmit audio streams at the same time without losing data.
Real-time recording from one software to another. The new direcire3.0 can record the external signal input source and the internal software signal audio stream into another software at the same time.
Professional digital recording -DTMP
Maya44v3 adopts e-wdm driving model, which provides excellent data processing performance and wider compatibility. E-wdm driver makes the recording work of multi-track digital hard disk reach the best state.
State. Maya44v3 is compatible with all kinds of popular music production software, including cakewalk/sonar, cubase, nuendo, logic, and control software such as.
Sound fe and wavelab, etc. Meanwhile, maya44
V3 is compatible with many sampling softwares, such as kontakt, sampletank, giga, logicaudio, exs24, halion, etc. And is compatible with virtual instrument software.
Body, cause, destroyer, etc.
Hardware installation
Recommendation system
Maya44v3 is not only a simple digital audio interface, but also a high-resolution digital audio device, which can process audio efficiently. Although maya44v3 can be executed in a system with inefficient processors, the system configuration has a key impact on the performance of maya44v3. We recommend a high-end system.
system requirements
1. Intel Pentium III processor or amd cpu at the same level.
2. Compatible with Intel and VIA motherboard chipsets
3. Minimum 256mb memory
4. Free pci slot
5. Microsoft Windows 98 SE/ME/2000/XP operating system.
6. Support UDMA 66/ 100 hard disk with a minimum speed of 5400 rpm.
7. Active speakers or passive speakers equipped with power amplifiers
Prepare to install hardware
Maya44v3pci card is as easy to be damaged by electric shock as other components in the computer. You should use anti-static equipment to eliminate your own static electricity to prevent static electricity from damaging the card.
Maya 44v3 is packed in an antistatic plastic bag to prevent electrostatic damage. Please do not open this bag before installing the card. Please follow the following steps to install it.
1. Turn off the computer and unplug it.
2. Open the case cover according to the computer instruction manual. Make sure there are free pci slots for installing maya44v3.
3. To prevent static electricity from damaging computer parts, please touch the computer case or something touching the ground. We suggest that you use anti-static equipment, such as anti-static wrist guard.
4. When holding maya44v3 card, please touch the marked part or edge of the card. Do not hold the motherboard or touch components.
Install PCI card
1. Found a free pci slot on the motherboard.
Where is the pci slot? Most computers have three types of slots. Pci slot is the most common one, which can be used for different devices, including sound cards and round cards.
Usually, pci slots are white. Agp slot is only used for round cards, and it is brown.
2. If there is a baffle behind the pci slot, please remove the screw or pry it open with a screwdriver.
3. Insert maya44 v3 into the pci slot and push it firmly, then install and tighten the screws.
4. Install the box cover.
Mi/ODI/O daughter card (sold separately) maya44v3 package does not contain Mi/ODI/O daughter card, which needs to be purchased separately.
Mi/ODI/O provides a coaxial input and output, an optical fiber digital input and 16 midi input and output channels.
Mi/ODI/O is used as the daughter card of maya44v3 series sound card. Simple installation, no power supply and driver installation, and no irq interrupt setting.
By adding s/pdif input/output power supply and midi interface, mi/odi/o enables you to get more functions from maya44 v3. Connect mi/odi/o to maya44 a3 as shown in the figure below.
Everything is ready!
install driver
After installing the hardware of maya44v3, it is necessary to install the driver of maya44v3. This manual describes the steps to install the driver software on the windowsxp platform. The installation steps under windows 98se, window *** e, windows 2000 and xp platforms are different.
Before installing the driver software, please put in the windows CD that may be used during the installation. Motherboards with new chips can constantly update the motherboard driver through patches provided by the motherboard or chip manufacturer.
Install in windows xp system
Download the latest version of maya44v3 driver from our website (... MediaTek ...).
The latest driver version corrects errors and updates functions.
1. Start the computer. Windows will automatically detect the newly installed hardware and the Find New Hardware Wizard window will appear.
2. Select "Install from a list or a specific location (advanced)" and click "Next".
3. Put the maya44v3 driver CD into the optical drive.
4. Select "Search for the best driver in these locations", then select "Include this location when searching" and click the "Browse" button to assign the maya44v3 driver folder to the optical drive.
If you installed from a downloaded update driver, please specify the location of the downloaded driver file.
5. Click the folder containing the maya44v3 driver, and click OK and Next.
6. On windows
Installed in 2000 and xp systems, the message "windows logo test failed to confirm its compatibility with windowsxp" can be displayed. In fact, the driver has been implemented by
Audiotrak has been completely tested and verified, and it is very safe to use. You can ignore this message and choose Continue Installation, and the installation will continue until the driver is copied to your computer.
7. The installer copies the driver to the computer.
8. When the installation is complete, click Finish.
9. The "Find New Hardware Wizard" window will appear again and continue to install additional maya44v3 drivers. The process is the same as the first installation.
10. When installing the second driver, a message "Installation completed, you can use the hardware" will appear in the lower left corner of the desktop.
1 1. Restart the computer to complete the installation.
To confirm that the maya44v3 driver has been installed, click the Start menu in the lower left corner of the desktop, and then select Settings] Console. Click System to open the System Contents window. Click the Hardware tab in this window.
Click the equipment manager button in the equipment manager section. The Maya44v3 driver should be in the list in the "Sound, Video and Game Controllers" section, so click "+"to expand the section.
Maya44v3 driver installation completed.
WINDOWS audio driver properties
To check whether maya44v3 is correctly recognized by windows and selected as the default audio device, click the Start menu in the lower left corner of the desktop, and then select Settings Console. Click Sound and Audio Devices to open the Sound and Audio Device Contents window. Select the Audio tab.
Maya44v3 driver is in the "sound playback" and "recording" lists.
Because maya44v3 control interface has all input and output tuning control interfaces, some advanced property buttons are grayed out (unavailable). Some functions of the control interface have replaced the original windows default tone.
Sound station This doesn't mean that you can't use advanced options. Maya44v3 control interface contains all audio functions. Some functions are consistent with the basic mixer control.
Interface of MAYA44 V3
2. Analog line input 3/4 interface (stereo input)
3. Analog line output 1/2 interface (stereo output)
4. Analog line output 3/4 interface (stereo output)
5. Coaxial digital output interface
6. Optical fiber digital output interface
7.Mi/ODI/O daughter card interface
The output port of maya44v3 uses stereo 2x mono Y line. As shown in the figure below, maya44v3 input port uses stereo trs jack, and the connected mixer and external equipment need two mono channels.
The jacks are used as left and right channels, respectively. The tip of the end of a three-dimensional (trs) connector is connected to the left (white) inlet/outlet port. The ring is connected to the right (red) inlet/outlet. The bushing is connected to the ground wires of the two channels.
Basic connection of external equipment
1. The signal obtained by analog input (1-4) is input to maya44v3 and computer. You can connect a general cd player, md and other analog audio sources for listening and recording. You can also connect audio sources, samplers and synthesizers to record their outputs.
2. Microphone input (analog input1&; 2) Used to connect a microphone. You can also connect a dynamic microphone or a condenser microphone that requires phantom power. You can record sounds or musical instruments, such as guitar, bass and piano.
3. The analog output port (1-4) has two different modes.
1) uses four output ports.
In this case, the analog output 1-4 is used as the output of the audio playback device. You can set them in software or windows multimedia features. This multi-output mode is often used when using a mixing table or multi-channel recording equipment. It can be used in multi-track recording software such as cubase~cakewalk.
* * * The black arrow in the figure below indicates the connection mode of this mode.
2) Output 1 and 2 as dual-channel main monitoring mode/use headphones.
You can use this mode when you don't have a mixer or want to get 2-channel downmix and main output.
Outputs 1 and 2 become the main stereo output of maya44v3. Its advantage is that it can monitor all the inputs and outputs of maya44v3 through outputs 1 and 2. At the same time, 3/4 of the output is the headphone monitoring output. Select the headset button on the control interface to monitor the output of 1/2 with headphones.
* * * The black and white arrows in the figure below indicate the connection mode of this mode.
4. Digital output (coaxial and optical fiber) can record audio output, mp3 file or audio file directly to md, dat or cd transponder. You can connect S/PDIF-compatible devices, such as md, dat or cd burners, to transmit audio data with minimum signal loss.
Maya44 v3 has no s/pdif coaxial and optical digital input interface. But you can buy mi/odi/o daughter cards, as shown below.
MAYA44 V3 control
Maya44 v3 control interface is the control center of maya44 v3. Input and output can be adjusted through a series of menus in the control interface.
After installing maya44 v3 hardware and drivers, the control interface icon will appear in the taskbar. Click the icon to enter the control interface.
Control interface menu
Closing the maya44 v3 control interface window does not mean closing maya44 v3. You can start the control interface at any time by clicking the control interface icon in the taskbar.
combo meal
1. Mouse wheel
Use the mouse wheel to adjust the volume. The scrolling scale level ranges from 1 to 8.
delay
Adjust the delay time of maya44v3 (usually also refers to the buffer size). The smaller the selected buffer value, the shorter the delay time. It is ideal for software synthesizer and choose small buffer to record accurately and timely.
At the same time, the delay time is also limited by system performance. When recording, select buffer value of 64- 152. Yes, Pendim.
4 system, select the buffer of 128 or 256. Buffers with sizes of 48, 1024 and 2048 are used in special environments. The buffer size of 48 is designed for very fast and reliable asio drivers.
Program working environment reservation.
3. Restore the system defaults
Reset the control interface to the initial default settings.
4. Always at the top
The control interface is always displayed at the top of all open windows. This makes it easier to operate maya44 v3 and other music software that works at the same time.
5. Linkage mode
Lock the left and right volume adjustment levers at the same time.
Directory 3.0
(It will be described in detail later)
input interface
1.mic, line 1/2
Select line level input or microphone input at input l/2. When selected, the light turns blue.
2. Microphone Phantom+12v
Click this button to provide+12v phantom power for the condenser microphone with the input of 1/2 (when using a moving microphone, this button should not be lit, indicating that the microphone does not provide phantom power. Providing phantom power to a moving microphone will damage the microphone. )
3. Monday
Click this button to select the monitoring sound source.
Anna, dig
When the Mi/ODI/O daughter card is connected, you can select analog input and digital input at input 3/4. Otherwise, it is automatically set to analog input. (When the digital input is monitored through the input 3/4, the digital signal and waveform output through the da converter cannot be mixed. )
5. Adjusting lever
Display and change the input volume of each sound source. You can use the mouse, mouse wheel and arrow keys to set the level. The highest level is+12db (400%), which needs to be adjusted. The reference level is between -3db and -6db.
Set mute and unmute by clicking the db indicator.
output interface
Adjust and monitor the output level of each audio channel through the level adjusting lever and level indicator. Click the earphone icon on the level adjustment lever of output 3/4, and the output port 3/4 will be converted into an earphone jack. Maya44v3 will provide high fax headphone amplifier function.
1.line 1/2 and 3/4
Represents the output ports 1/2 and 3/4 respectively.
Step 2 mix
By selecting this button, the analog outputs 1/2 and 3/4 are mixed together and output through the output line 1/2. In other words, you can get the mixed output of channel 1/2 and 3/4 by analog output 1/2.
Maya44v3 is equivalent to its own built-in mixer. Some recording software that can only use the windows preset mixer may not be compatible with maya44v3.
3. HP
Select this button to make headphones output at 3/4 of the output line.
4. Adjusting lever
Display and change the output level of each sound source. You can use the mouse, mouse wheel and arrow keys to set the level. Set and cancel the output mute by clicking the db indicator.
5. Master
Displays and changes the level of the final output. You can use the mouse, mouse wheel and arrow keys to set the level. Set and cancel the output mute by clicking the db indicator.
Digital input/output, clock and sampling frequency
Maya44v3 supports digital input and output. But maya44v3 only has coaxial and optical fiber digital output. You need to purchase an additional "MF ODI/O" daughter card to support digital input.
1.s/r
Select the sampling frequency of maya44v3. The green light indicates that the current sampling frequency omaya44v3 supports sampling frequencies of 22, 24, 32, 44. 1, 48, 88, 96(khz).
Select a (automatic mode) to automatically match the sampling frequency of the audio source (red light is on). Turn off the automatic setting and set the sampling frequency manually (the red light goes out).
2.m.clk
Select the main digital clock source.
Int: Select the internal clock of maya44v3 as the master clock. This mode must be selected when only one maya44 v3 is used or another device is set as a slave device.
Ext: Select the digital clock or audio data from external devices as the clock source. The external device will act as the master device. Maya44 v3 will run as a slave device.
Step 3 dig
Opt/cox: When connecting the Mi/ODI/O daughter card (sold separately), you can switch between maya44v3~zopt (optical fiber) and cox (coaxial) digital input sources.
Maya44v3 supports cdda(cd digital audio) technology. When cd-rom drive supports cdda technology, wdm driver can play cd digital audio from cd-rom drive. Please refer to the user manual of the CD-ROM drive.
circuit diagram
Settings in the software
* This section describes some basic configuration examples of popular software. Please refer to the user manuals of these softwares for details.
Steinberg Cuba SX
Execute cubase sx, find the device-] device settings -] VST multitrack, and select "asio 2.0-maya44 v3" as the asio device. At this point, clicking the asio control interface can't work yet. You need to press the Apply button to change the settings.
In cubase, the logical input 0/ 1 is the input of maya44 v3 1/2 (similarly, the input 2/3 is the input 3/4 of maya44 v3).
Logical audio
Perform Logical Audio and Find Audio-] Audio Hardware &; Driver. Click Audio Driver 2 and change the settings as shown below.
Cakewalk sonar
For sonar supporting wdm and asio, the following steps must be completed. Perform sonar and find the option-] Audio. ...
1.wdm/ks mode-Change the settings of input/output drivers as follows.
The input and output drivers must match each other. After changing the settings, restart the sonar.
2.asio mode
*sonar 2.x supports asio mode. For maya44 v3, these two modes recommend asio mode to you.
First, in the drop-down menu of audio options, select asio as the driving mode. As shown in the figure below. Then restart the sonar.
Step 2, change the settings of the input/output driver, as shown in the figure below.
Enabling sonar software input monitoring will introduce loops. Before processing sonar software input monitoring, you must turn off or mute ~maya44v3 input monitoring.
Steinberg Nundo
Run nuendo and find the device-] Device Settings -] vst multitrack. At this point, clicking the asio control panel will be invalid. Be sure to click the "Apply" button after changing the settings.
For nuendo 2.x and later, select and enter 3/4.
Locate the device-] device settings -]vst connection menu. Click the Input tab.
Click Add Bus and select an input port.
In nuendo, the logical input 1/2 of the software is the input 1/2 of maya44v3 (similarly, the input 3/4 is the input 3/4 of maya44v3).
TASCAM GigaStudio
Execute gigastudio and select Settings on the left.
On the right, select maya44 v3-gsif 1 as the hardware. The sampling rate and bit depth should also be matched according to the sequencer.
Sound Fe
Run sound fe and find the options-] preferences -]wave tab. Select maya44 v3 ch 12 in the playback and recording device.
Las Vegas & Vegas Video Execution Vegas, find Options-] Preferences-] Audio Devices tab. Select the preset stereo, front speakers and rear speakers you want in the audio device type.
Sour
Execute the acid and find the Options-] Preferences-] Audio tab. Select the preset stereo, front speakers and rear speakers you want in the audio device type.
sample
Run samplitude and find options-] system. Select "asio 2.0-maya44v3" and "Maya 44 V3 Clock" for the asio device and clock in the ASIO setting section.
If the settings are correct, you will see "ASIO 2.0- Maya 44V3 (1+2)" and "ASIO 2.0- Maya 44V3 (3+4)" at the top, as shown in the figure.
Wave laboratory
Run wave lab and find Options-] Preferences-] Sound Card.
Select "mme-MDM1-maya44v3 ch12" or "asio 2". -maya44 v3”。
What is DirectWIRE?
Direcire is 100% pure virtual digital connection line!
Direcire is a driving technology set by audiotra. By using audiotrak's unique e-wdm audio midi driver, this technology can send audio streams within the software.
With ireclre, applications can record the audio output of other software running at the same time, without external cables and without losing any data.
Direclre can easily cut off any audio stream by transmitting mp3, online broadcasting and other data. Through Direclre.
What new features does direcire 3.0 bring?
In the input bar on the leftmost side of the window, the four inputs represent the four input ports on the maya44v3 sound card. This allows external input signals (such as line level input, microphone, S/PDIF digital signal).
) and the internal software signal audio stream can be transmitted to another software at the same time. In the previous version of direcire (1.0 or 2.0), when two softwares are connected virtually, the corresponding
When the channel is occupied, external input signals cannot be input into the channel at the same time, and directly
3.0 solved this problem. For example, this allows users to simultaneously input their own voice and accompaniment music from one software to another.
DirectWIRE 3.0 interface
Click direcire on maya44v3 control interface to open direcire 3.0 interface window.
As shown in the figure below:
1. The numbers in each line represent input or output ports.
2. Columns represent the input and output (on and off) of each driver.
3. When dragging the mouse, draw a virtual line from one point to another.
The input part represents four input ports on maya44v3 sound card, which can be any signal input source:
Such as line input, microphone, S/PDIF digital signal, etc.
The mme part represents the input and output of general software:
Such as: winamp, wavelab (non-asio mode), cakewalk, cooledit, vegas, samplitude and so on.
The wdm part represents the input and output of the software supporting the multi-mme driving model:
Such as sonar, powerdvd, windvd, etc.
The asio part represents the input and output of the software of the asio driver model.
Such as cubase, logic, reason, nuendo, sonar, samplitude and so on.
The gsif part stands for gsif application software, such as gigastudio.
* Some software supports multi-driver mode.
Application example of DirectWIRE 3.0
Example 1: input the signal of winamp(mme) into wavelab(mme).
Example 2: Input the signal of winamp(mme) into sonar (wdm).
Example 3: Input the signal of winamp(mme) into cubase, logic and nuendo(asio).
Example 4: Input the signal of gigastudio(gsif) into sonar (wdm).
Example 5: Input the signal of gigastudio(gsip) into cubase(asio).
Example 6: input the external microphone signal (input) and gigastudio(gsip) signal into cubase at the same time.
(Asian Intelligence Organization)
Technical indicators
[Analog Audio Section]
1. Analog input
1) Interface type: 4 analog inputs.
A. 1/4-inch (55mm) TRS interface with microphone input (line input 1.2).
B. 1/4 inch (55mm) TRS (stereo) connector (line inputs 3 and 4)
2) Peak level: 0 dbfs @ 6 dbv
3) gain adjustment range:-35.5db ~+12db (1.5db is the incremental unit).
4) Impedance: 10kohm, 2kohm (when the phantom power supply is turned on)
2. Analog output
1) interface type: 4 analog line outputs 1/4 "(55mm) TRS (stereo) interface x2 (line outputs1,2,3
,4)
2) Peak level: +6dbv@0dbfs
3) attenuation range: -48db~+6db( 1db is the increasing unit)
4) Impedance: 100hm (line output 1 2), 00hm (line output 3,4, headphone output).
3. Microphone preamplifier
1) Peak level: 0dbfs@8mv
2) gain adjustment range: it can be increased by +42db, -35.5db ~+ 12db (the increase unit is 1.5db).
3)+ 12v phantom power supply
4. Earphone amplification
1) Load impedance range: 32-600 ohms (best performance)
2) Output power supply: 125mw@32ohm per channel.
[Digital Audio Section]
5. sampling frequency support: 22, 32, 44. 1, 48, 88.2, 96 (kHz)
6. A/D conversion, D/A conversion *
) modulus signal-to-noise ratio: 90db(a-weighted, 0db gain) @fs=8khz.
2) Signal-to-noise ratio of digital signal: 100db(a-weighted, 0db gain) @fs=48nlz.
3) A/D gain programming gain: -48db~+6b( 1db is the increment unit)
7. Digital output
1) interface type: gold-plated rca interface, optical fiber interface.
2) Format: IEC-0958 (South /PDIF)
3) Sampling frequency: 22,32,44.1,48,88.2,96 (kHz).
4) Conversion resolution: 24 bits
8.Ni/ODI/O daughter card (optional) *
1) 16-channel midi input/output interface
2) Coaxial input and output -PDIF IEC 958
3) Optical fiber input -IEC-958 (USA /PDIF)
(* Mi/ODI/O daughter cards need to be purchased separately. )