A hectic year is coming to an end. Looking back on the work in the past year, there must be a lot to sort out. It is better to make a summary and analyze and summarize the past work. I believe many people are in a state of confusion and inner collapse! The following is the year-end summary of the laboratory director (selected 6 articles) carefully compiled by me, which is for reference only and I hope it will help you.
Year-end summary of laboratory supervisor 1 Under the leadership of the Party committee and the administration of the college, according to the work plan formulated at the beginning of the year and around the work requirements of building a qualified undergraduate college, the service consciousness of "teaching and scientific research as the center" has been improved, an efficient and standardized work operation mechanism has been formed, and all the work and tasks assigned by the school have been earnestly completed. The summary is as follows:
I. Equipment management
(a) to ensure the stability of the school.
Do a good job in the inspection and preparation of teaching equipment to ensure that the equipment is in place and in good condition at the beginning of school; Do a good job in purchasing and supplying materials and consumables needed by the laboratory, and maintain and lend related equipment.
(two) to ensure the normal and orderly teaching order, do a good job in the management of various equipment.
1. Further standardize the management of teaching equipment in the college, establish and improve the post responsibility target of equipment manager, implement the equipment manager of each department, and clarify the post responsibility, and the responsibility lies with people.
2, strengthen equipment inspection at ordinary times, focusing on the implementation of the management system, at the same time, timely maintenance, to ensure the equipment intact rate.
3. Do a good job in purchasing and supplying daily needed materials and consumables, and improve and standardize the borrowing and receiving system.
4. Make records of new equipment and report relevant data in time.
5. Complete the annual inspection of the elevator.
6. Do a good job in scrapping some assets of the school.
7, do a good job in the school sports meeting equipment inspection and maintenance.
8. Ensure the safety of equipment during typhoon and communication.
Two, do a good job in the school air conditioning outdoor unit inspection, timely rectification of security risks, strengthen laboratory construction and management.
1. Formulate the Measures for the Management of Experimental Training Rooms in shanghai dianji university, and standardize the laboratory construction management and daily management of the college.
2. According to the present situation of the laboratory and the demand of undergraduate teaching, the college construction project in xx years was determined, with the project *** 18. The project leader is responsible for the work system.
3. Carefully plan and deploy all the construction projects of the college, complete the declaration of government procurement equipment, and ensure the completion of government procurement special projects and college projects in 20XX.
4.xx years began to apply for the establishment of laboratory construction projects.
Third, do a good job in other aspects.
1. Complete the post appointment of employees.
2, do a good job in safety, health and security.
3. Do a good job in language standardization.
4. Do a good job in file management.
5. Complete other related work assigned by school leaders.
2 year-end summary of laboratory supervisor In the past 20xx years, under the overall arrangement of company leaders, with the strong cooperation of brother departments and site comrades, and with the conscientious and diligent efforts of laboratory staff, we are about to conclude this year successfully.
After many inspections by the municipal quality supervision station and the development zone, the laboratory followed up in time according to the requirements of the superior, and exchanged learning with other laboratories in the area under the auspices of the quality supervision station. Our laboratory experience has indeed improved a lot, the standard technical documents have been updated in time, and the scientific quality of personnel has been trained many times, which has better improved the overall level of our laboratory in production and practical operation.
The experimenters pay attention to their own learning, and serve the laboratory with a scientific and rigorous attitude under the guidance of the technical leaders of other laboratories in the region and in accordance with national and regional standards. In practical work, experimenters should carry out multi-batch and multi-faceted tests and irregular sampling inspection of raw materials; If there is a big deviation in the experimental data, we should contact the raw material manufacturer in time and report it to the laboratory, so as to control the concrete quality in time, solve the problem and avoid or reduce the chance of concrete leaving the factory from the source. This year, inspectors tested more than 300 batches of cement, with a pass rate of 98%; More than 280 batches of fly ash were tested, and the qualified rate was 95%. The unqualified concrete was avoided or greatly reduced from the source, which laid a solid foundation for the follow-up work of the laboratory.
For the quality inspector, because of the particularity of his post, that is, the position closest to concrete in practice, he even stands in the laboratory and construction site and has the most direct and sincere view on materials. Their reaction on the spot has brought valuable adjustment information for the construction of the laboratory. In view of the importance of personnel in special positions, the laboratory often organizes study and exchange in combination with new national standards and management documents issued by the region to strengthen the quality management awareness of personnel. Exchange experience in the laboratory regularly, share your own experience and experience, and make progress together. Make the laboratory work more stable in the exchange of theoretical study and practical experience, and escort the actual production. In view of some actual production work, some measures are also summarized:
1, when small quantities are needed for site construction, concrete slump shall be reduced as much as possible on the premise of ensuring site construction;
2. For the large-scale construction site with large requirements, the quality inspector must go to the construction site with the vehicle, so as to feed back the site situation in time and bring technical reference for the adjustment of site technology;
3. The problems on site can be solved in time and effectively and fed back to the station.
4. When the weather changes greatly, contact the site technical department in time to bring maintenance measures to better ensure the quality of concrete.
In normal production, the laboratory will contact with the construction party attentively, exchange opinions in time according to the characteristics of the construction party, and strengthen technical exchanges, so as to better complete the project, better understand the needs of the construction site, facilitate targeted adjustments on site, and better improve our services.
But there are also some shortcomings in actual production. Because the seasonal exchange of raw materials is unstable, the unstable state of materials brings inconvenience to construction. The laboratory also carefully searched for the reasons and seriously contacted the raw material suppliers for technical adjustment. We discuss and study the problems according to the problems to ensure the smooth implementation of subsequent production. On these issues, the laboratory has also accumulated a lot of experience to avoid or reduce the occurrence of similar incidents in subsequent production, and indirectly improve the laboratory's own adaptability.
In the obvious seasonal transition stage, the laboratory has carried out detailed communication with the construction site, such as watering and curing of concrete in spring and summer, anti-freezing measures in winter, and matters needing attention in mass concrete curing. At the same time, we also got the strong assistance from the comrades at the scene to complete the project and minimize the probability of problems.
Over the past year, we have successfully completed the resettlement of high-rise buildings in front of Nanbeizhuang and Yantai in Xuejia Island, and worked as a tourist and holiday worker in Yintan. Jiaonan villa group; As well as the first-phase project of Jiaonan Poly Hailuolan and Qingdao Liansheng International Building under construction, the construction sites are progressing smoothly, and Anmai Aluminum (Qingdao Branch) is about to be completed; And successfully launched the Phoenix Coast 1# area project!
The year 20xx is coming to an end. In this coming year, we thank the leaders of the company for their support to the laboratory work, the brothers of the company for their mutual trust and understanding, and the local leaders and technical comrades for their support and understanding!
The end of a new year, the beginning of a new year. It is expected that we can profoundly sum up our past there and better serve our future.
Year-end summary of laboratory supervisor: In 3-20xx years, under the correct leadership and specific guidance of the company, our laboratory is the functional department responsible for the company's technology development and quality control, and all our testers adhere to the team spirit of self, are responsible for the company's product quality, work diligently for the company's interests, and successfully complete various quality control and inspection tasks assigned by the company. The laboratory attaches great importance to all kinds of work ideologically, and each responsible person has a clear post and a high enthusiasm for work, and cooperates well with other relevant departments to successfully complete all kinds of test and detection tasks. The following is a summary of the laboratory's work in 20xx:
I. Technical exchange and on-the-job training:
1, all special or important projects, we consciously strengthen technical guidance, inspection, supervision and service to the construction site, ensure product quality, strive to satisfy customers, be responsible for customers, and leave no quality hidden danger for every poured concrete project, so as to reassure customers. Conscientiously implement the spirit of relevant instructions from superiors, and comprehensively improve the overall quality awareness of personnel.
2. In order to improve personnel's business skills, we have carefully organized on-the-job training for personnel, on the one hand, we have obtained post qualification certificates, on the other hand, we have enabled personnel to fully master various inspection skills.
Second, the function:
1. further improved the work responsibilities, management system and management methods of the laboratory, defined the post responsibilities of laboratory personnel, improved the use, maintenance and maintenance records of testing instruments, and standardized the filling and storage system of testing report forms.
2, fully implement the daily material test task, do a good job of technical service of qualified concrete products. In 20xx, the company has a large number of production tasks, which requires high laboratory work intensity. With the joint efforts of all the staff in the laboratory, all the experimental tasks have been successfully completed. Up to now, more than 300 batches of sand and gravel aggregate, cement, admixture and fly ash have been inspected, 3,245 groups of concrete compressive strength specimens have been inspected, the qualified rate of concrete compressive strength inspection is 100%, 387 groups of various types of concrete have been trial-produced, and more than 3000 inspection reports have been issued. Successfully completed the optimization of concrete mix proportion, reduced cement consumption, saved costs and improved benefits. According to the customer's demand, we have successfully prepared a variety of special concrete products, such as equal strength mortar, high strength fine stone concrete and so on, which make up for many shortcomings in the same industry. This year, the monthly summary statistics of laboratory cement and concrete compressive strength were carefully made, and the quality control level was determined according to its standard deviation. The reasons for the unsatisfactory data are analyzed and improved.
As the laboratory work of the company itself belongs to a high-tech work, as a technical department serving production and products, it must adapt to the market choice with high-quality products. In the future work, we should strive to improve our professional level and ideological style, and better serve the development of the company with higher work enthusiasm and upward team spirit.
At the end of 4 years, the director of the laboratory concluded that with the care and support of the school leaders and the active cooperation of all chemistry teachers, the chemistry laboratory strictly implemented the chemistry experiment teaching plan, tried every means to overcome difficulties and carry out experiments, and successfully completed the chemistry experiment teaching tasks and laboratory management this semester. The following work was carried out this semester:
First of all, in experimental teaching.
During my time as an experimental teacher in the laboratory, I earnestly implemented the experimental teaching plan and actively carried out my work to keep abreast of the progress of chemistry teaching in Grade Three. I often make full preparations for "students' experiments" before receiving the notice of experiments, and debug "demonstration" instruments and appliances so that I can take them with me at any time and open the laboratory for students to experiment at any time, which not only ensures the normal operation of various experimental teaching. Cooperate with the chemistry teacher to successfully complete the experimental teaching task of this semester. In addition to ensuring the normal development of chemistry demonstration experiments and junior three students' experiments, data are also sorted and classified. This school year, we have done a lot of work to cooperate with the school to meet the balanced acceptance of Tianshan District. Organize accounts, prepare all kinds of materials, submit all kinds of forms, and successfully complete all kinds of materials with the cooperation of our teacher.
Second, in laboratory management.
Attach great importance to laboratory safety management. At the beginning of the semester, students do experiments for the first time, and teachers are required to educate students about laboratory safety first. When students experiment, I insist on following the class, correct students' wrong operations in time, and try to avoid dangerous situations in the experiment.
Insist on cleaning the instrument room and laboratory in time to ensure the cleanliness of the instrument room and laboratory. The fault of the instrument can be repaired and eliminated as much as possible, which ensures the intact and normal use of most instruments. Try to maintain the experimental equipment yourself. In account management, we always insist on timely posting after shopping, posting damaged items in time, and timely checking and writing off at the end of the period to make the accounts clear and consistent. In the collection of experimental data, we can fill in all kinds of tables, tables and books in the laboratory in time, and urge teachers to make all kinds of plans and tables in time and bind them into books, which ensures the continuity of the data and makes them meet the requirements of superiors.
Third, cooperate with other work done by the school as a whole.
Actively cooperate with the academic affairs office to do a good job in class checking, recess and self-study for grade groups, as well as subcontracting monthly and final examination papers. Do a good job in the use registration of laboratories and electronic blackboards. Take the initiative to regularly disinfect the chemistry laboratory with ultraviolet rays, and strive to provide a safer and healthier experimental learning place for students. Provide a good place for the second day training and monthly examination. At the same time, in order to avoid the damage and loss of experimental instruments, the instruments and appliances in the ongoing experiment are often moved up and down and put back in place in time, which fully ensures the orderly training of grade two.
In a word, with the care, support and help of school leaders and chemistry teachers, the chemistry laboratory has played a positive auxiliary role in chemistry teaching and the overall education and teaching of the school, and successfully completed all the tasks of this semester. We will continue our efforts in the future, as always!
No.13 middle school chemistry laboratory
The director of the laboratory summed up five years at the end of the year and has been employed for more than two months. Under the care of the leaders, with the tireless guidance and help of colleagues, I have a little knowledge of the work tasks at the beginning, and now I can solve the work problems comprehensively and efficiently. Improve your working ability and accumulate working experience through continuous learning. Try your best to assist leaders and colleagues to complete various experimental tasks. Colleagues strictly abide by company rules and regulations. Now I will make a comprehensive summary and reflection on my post work and study since I joined the company for two months.
I. Work aspects
As a equipment manager, the main work in the near future is to understand and master the basic parameters, performance and standardized operation of instruments and equipment; Filing, sorting and summarizing the parameter data of instruments and equipment; Ensure the normal operation of instruments and equipment; Sorting and counting laboratory tools and auxiliary equipment; Conduct daily safety and environmental inspection of the laboratory; Manage test samples; Inspection instruction for instruments and equipment during preparation; Develop new standard work instructions and explain standards.
At first, I couldn't start from work, but through the unremitting guidance and help of leaders and colleagues, the situation gradually improved. Now I can consider the problem more carefully and comprehensively, instead of rushing blindly. There are some shortcomings in the preliminary work, such as the failure to know the equipment parameters, performance and use environment in advance when writing the verification regulations in the process of instruments and equipment, which leads to the ineffectiveness of the written regulations; Unfamiliar with the system process, I confused the sample circulation with the management process, but I found it in time and corrected it. Treating this job requires enough care, patience and sense of responsibility, so in the future, I will calm down, do every job carefully and methodically, complete every task well, and improve efficiency and quality.
Second, study.
The normal operation of the equipment is the cornerstone of the smooth progress of the inspection task, so it is particularly important to ensure the normal operation of the equipment, which is also one of the important tasks of equipment manager. Therefore, I have been constantly learning to master the basic parameters, performance and basic operating specifications of instruments and equipment, understand the characteristics and basic structure of equipment operation, and can come up with countermeasures once problems arise. Fire safety is also an important part of laboratory management, so my colleagues and I participated in the fire safety knowledge training organized by the company in June, which gave me a deeper understanding of fire-related knowledge and how to deal with fires correctly. In June, I participated in the internal audit of the whole testing company. As a member of the testing company, I deeply understand the operation process and existing problems of the company's testing system, and work with my colleagues to solve these problems. Now, in order to finish the three-in-one review on schedule, I learned how to standardize the interpretation standards and write standard work instructions. During these two months of study, I deeply felt the charm of leaders and their work, as well as the unity and mutual assistance among colleagues. In the future work, I will learn with an open mind, consult my colleagues, constantly improve and enrich myself, and finish my work better.
Third, summary.
After two months of work and study, I found that my working ability and ideological consciousness have been greatly improved. As a new employee, I want to thank the company for giving me an opportunity to reflect my own value and grow with the company. This is my opportunity and honor. When I first entered the company, I was flawed in many aspects, but with the tireless guidance and help of company leaders and colleagues, I constantly improved myself, improved myself, and gradually improved myself, and achieved good results.
In the future work, I will treat every task carefully and strictly demand myself to complete the task with high efficiency and high standards. Grow up at work and improve work ability.
The above is a summary of my two months' work. Although there were some problems in my work, I corrected them in time. In the following days, I am still confident in my work, less impulsive and reckless, and more mature and calm. No pains, no gains. I will continue to move forward and make progress with the company.
At the end of 6 years, the director of the laboratory summarized that according to the General Guide for Biosafety of Microbiology and Biomedical Laboratories and the requirements of biosafety management of laboratories in Hebei Health System, especially the requirements of the national and provincial video conference on disease prevention and control on 8 October, in order to further implement the relevant regulations on laboratory biosafety, we mainly did the following work:
First, strengthen leadership and improve organization.
In order to better implement the various systems and regulations of laboratory biosafety, the party group of the Standing Committee decided to set up a biosafety management committee, with Comrade Dou as the director, Zhu Fengchao and Chen Yanqing as deputy directors, and Ge,,, and Huo Jianguo as members. Various management systems and safety systems of laboratory biological safety have been formulated.
Second, the system is implemented and measures are in place
Various biosafety related systems have been formulated, including laboratory management system, microbiological laboratory work system, aseptic room operation system, microbiological laboratory disinfection and isolation system, laboratory biosafety management and guarantee system, laboratory accidental pollution accident handling system, bacteria and virus strain preservation management system, drug reagent management system, highly toxic drug management system and waste disposal system.
The third is to check and evaluate and rectify in time.
On 26th, X, the Biosafety Committee conducted a self-examination and inspection of the unit and the stations under its jurisdiction. Summarize after the self-inspection and put forward effective rectification opinions and measures (with self-inspection table and inspection content table attached). Through self-examination, we found out the existing problems and gradually improved our biosafety work.
Fourth, do a good job in training and improve quality.
In order to further improve the change of the city's health inspection personnel's understanding of biological safety, according to the requirements of the station leaders, a study class focusing on biological safety management and food poisoning treatment was held from June 13 to June 16, with the participation of inspection personnel from all counties and stations. Director Dou put forward specific requirements on the importance of biosafety work and biosafety work. Through the study, the laboratory biosafety awareness of the city's inspectors has been improved, and the concept has changed, which has played a certain role in doing a good job in biosafety. In X, we plan to hold a biosafety seminar with the participation of city and county inspection chiefs. The plan has been made and the leader has approved the unfinished work.
Verb (abbreviation of verb) implements the system and regulates management.
We should establish a management system for the preservation of strains and highly toxic chemicals, do a good job in preservation and custody in strict accordance with the management system, and do a good job in registration. Special storage facilities should be set up, locked and kept by two people, strict approval and use procedures should be formulated, and registration records should be kept.
Six, strengthen safety awareness, eliminate potential safety hazards
In order to prevent experimental pollution accidents and make preparations, we have formulated operating rules for laboratory pollution and waste disposal, and strictly followed them to prevent pollution accidents caused by improper waste disposal. Once it happens, do it in strict accordance with the handling regulations.
There is a problem:
First, the strain preservation system is not perfect.
Second, although the leaders have made great efforts and inclinations, due to economic problems, the sampling equipment and untrustworthy reagents for public health incidents can only be basically achieved. I hope that the superior leaders will reflect more and strive for policy support.
Third, the formulation of biosafety measures should be further improved.
;