Bian Xiao hides in the corner to keep warm, because the corner is 90 degrees, but lying underground will keep warm, because the ground is 180 degrees.
Then, to get to the point, floor heating has gradually become the mainstream of home improvement heating mode, and it is recognized as the most comfortable heating mode at present. But the floor heating system must be decided before decoration, and the laying needs to be combined with decoration. This is why some owners obviously want to install floor heating, but they can't, such as owners of hardcover rooms, owners who have only been decorating for a few years, owners who are not tall enough, and so on. So, can these owners really only give up such a comfortable heating method as floor heating? Obviously not! Here are three examples of owners, how to enlarge and crack them! Breakthrough 1: dedicated central air-conditioning indoor unit
Owner: Ms. Wang
Recommended products: unidirectional airflow indoor unit+intelligent induction 3D airflow indoor unit.
Requirements: It is better to use central air conditioning originally, otherwise the ceiling needs to be modified.
Duration: about a week.
One-way airflow indoor unit has a wide air supply angle, which directly sends hot air to the ground and heats it from hot to cold through convection, without the problems of hot head and cold feet and stuffy indoor air, and is especially suitable for long strip spaces such as guest restaurants.
For a small bedroom space, it can be matched with an intelligent 3D airflow sensing indoor unit. It has two intelligent probes, one of which can sense the position of human body. Through remote control, you can choose two air supply modes: blowing to people and blowing away from people, which makes the user experience more comfortable. Another detector is especially important in winter. It can directly sense the ground temperature. When the ground temperature is low, it will control the wind direction to blow against the ground and heat the air from bottom to top, which can also avoid the problem of hot head and cold feet.
Breakthrough Tip 2: Surface Mount Heated Radiator
Owner: Cheng Moumou
Recommended products: radiator+gas boiler
Requirements: drill holes to install water pipes, with bare surface and slight damage to decoration.
Duration: about 2 days.
Suitable for: hardcover rooms, renovation of old houses.
Simply put, surface-mounted heating is to use radiators to dissipate heat. If you have living habits in the north, you can consider central heating, but its temperature source is an independent heat source such as a common heating stove in the south.
Judging from the final comfort effect, surface-mounted heating is naturally not as good as floor heating because it is heated by radiating fins, and its value is not enough. But radiators also have many advantages. First of all, it is cheaper than the floor heating system. Secondly, there is no great requirement for installation, and there is no need for large-scale destruction and rectification of the original pattern. For the owners of old houses and hardcover houses, the cost performance far exceeds the floor heating. Breaking trick 3: electric heater
Owner: Qiao Moumou
Recommended product: electric heater
Requirements: Sufficient power cord
Duration: half a day
Suitable for: renovation of old houses
Reference price: single chip 1000 to more than 3000, depending on the scheme.
The heating system of electric heater is similar to that of radiator. The difference is that the electric heater uses a power supply, which does not need a boiler or a water pipe line. It just needs enough power near where you install the radiator. Of course, it is best to have relatively independent power supply lines and sockets. If not, you can also temporarily arrange an open line, which will not have much impact on the room decoration effect. The key point is that compared with other methods, the installation of electric heater is really too fast, and a separate radiator can be installed in about 5 minutes, without wires!