How to disassemble Baowo bx7 oil three filters?

What you want to know is "How to disassemble the Baowo bx7 oil machine filter?" The relevant contents are as follows:

Baowo bx7 Disassemble the oil filter as follows:

1. Start the vehicle for about 1 min to make the engine flow fully, then turn off the engine, open the oil filler cap, loosen the filter and oil pan screws with tools, put the oil basin under the oil pan screws, completely loosen the oil pan screws, and drain the old oil until the flow stops completely;

2. Then tighten the oil bottom screw, wipe off excess oil stains with cotton cloth, and unscrew the old filter element. It is recommended to carefully pad cotton cloth and burn your hands. Apply engine oil to the sealing ring of the new filter and tighten it clockwise. Add new oil from the oil filler. It is recommended to consult the 4S shop in advance about the amount of oil to be added, and tighten the fuel filler cap after adding.

3. Restart the engine 1-2 minutes, and observe whether the bottom screw and the mechanical filter leak oil. If there is oil leakage, shut down the engine in time for inspection and treatment; If there is no oil leakage, check the oil quantity of the dipstick after flameout, add it to the standard position (above the center line of the dipstick) and replace it.