Chapter I Registration Management System Article 1 In order to standardize the registration management of construction engineers, these implementation measures are formulated in accordance with the Administrative Licensing Law and the Regulations on the Administration of Registered Construction Engineers (Order No.23). Ministry of Construction 153) and relevant laws and regulations. Article 2 These Measures shall apply to the registration and management of second-class construction engineers within the administrative area of Yunnan Province. Article 3 The administrative department in charge of construction in Yunnan Province (hereinafter referred to as the Construction Department) is the registration management institution of the second-level construction engineer, and is responsible for the examination and approval of the registration of the second-level construction engineer. The specific registration work is entrusted to Yunnan Certified Architects Management Office. Chapter II Registration Application Procedures Article 4 Before applying for registration, the applicant shall be employed by an enterprise with qualifications of construction or survey, design, supervision, bidding agency and cost consultation, and sign an employment contract with the employing enterprise according to law. The applicant shall truthfully provide the relevant application materials to the employing enterprise and be responsible for the authenticity of the contents, and submit the registration application materials to the provincial construction administrative department or relevant business departments where industrial and commercial registration is located through the employing enterprise. Article 5 An application for registration shall be filed through the Internet and in written form. The applicant's unit fills in the information network of Yunnan Provincial Construction Management Office (website: www.ynjst-jgc.com), and automatically generates an application form to be printed after the online application is successful. Article 6 Application for registration includes initial registration, renewal registration, change registration, additional registration, cancellation registration and re-registration. If a registered architect loses or defaces his registration certificate or practicing seal, he may apply for a replacement or renewal. Article 7 An applicant for initial registration may apply for initial registration within 3 years from the date of issuance of the qualification certificate. If it fails to do so within the time limit, the applicant shall provide the corresponding professional continuing education certificate, and its learning content shall comply with the provisions of the Ministry of Construction on the continuing education of registered architects. To apply for initial registration, the applicant shall submit the following materials: (1) an application form for initial registration of the second-level constructor; (two) a copy of the qualification certificate, academic certificate and identity certificate; (three) a copy of the employment contract signed by the applicant and the employing enterprise or a certificate of labor, personnel and salary relationship issued by the applicant's enterprise; (four) overdue application for initial registration, it shall provide a copy of the certification materials that meet the requirements of continuing education. The application materials consist of the application form and the material attachments bound by parts (2), (3) and (4). Article 8 Anyone who needs to continue practicing after the expiration of the renewal registration period shall apply for renewal registration in accordance with the relevant requirements of the Regulations on the Administration of Registered Architects 30 days before the expiration of the registration period, and the renewal registration period shall be 3 years. To apply for renewal of registration, the applicant shall submit the following materials: (1) application form for renewal of registration of second-level constructor; (2) the original registration certificate; (three) the employment contract signed by the applicant and the employing enterprise or the certificate of labor, personnel and salary relationship issued by the applicant's employing enterprise; (four) a copy of the certification materials that meet the requirements of continuing education within the validity period of the applicant's registration. The application procedures and the number of copies of materials shall be handled according to the initial registration requirements. Article 9 In case of any of the following circumstances during the registration period, an application for change of registration shall be made in time. After the change of registration, the validity period of the original registration certificate shall be implemented. 1, change of practicing enterprise; 2. The name of the employed enterprise changes; 3. Change of the name of the registered architect. To apply for change of registration, the applicant shall submit the following materials: (1) application form for change of registration of second-level constructor; (2) The original registration certificate and practicing seal; (3) If the practicing enterprise changes, provide the employment contract signed by the applicant and the newly hired enterprise, or the labor, personnel and salary relationship certificate issued by the applicant's employing enterprise, and a copy of the job transfer certificate (the termination or expiration certificate of the employment contract with the original employing enterprise, and the retirement certificate of retirees); (4) If the name of the enterprise where the applicant works changes, a copy of the changed business license of the enterprise as a legal person and a copy of the letter of change of enterprise name issued by the administrative department for industry and commerce where the enterprise is located shall be provided. (5) If the name of a registered architect changes, the original identity certificate after the change or a valid certificate issued by the household registration administration department of the public security organ shall be provided. Tenth additional registered construction engineer can apply for additional registration after obtaining the corresponding professional qualification certificate. If the newly-added vocational qualification certificate has not been registered for more than 3 years, it shall provide the certificate of continuing education and study of the major during the latest registration period. After the additional registration is granted, the validity period of the original professional registration remains unchanged. To apply for additional registration, the applicant shall submit the following materials: (1) application form for additional registration of second-level constructor; (two) a copy of the qualification certificate of the additional vocational qualification examination; (3) The original registration certificate and practicing seal; (four) a copy of the certification materials that the added major meets the requirements of continuing education. The application procedure and the number of copies of materials shall be handled according to the initial registration requirements. Eleventh cancellation of registered construction engineer has one of the circumstances listed in Article 17 of the Regulations on the Administration of Registered Construction Engineers, and the Ministry of Construction shall handle the cancellation procedures. The applicant or his enterprise shall provide the following materials: (1) application form for cancellation of registration of the second-level constructor; (2) The original registration certificate and practicing seal; (three) a copy of the certificate that meets one of the circumstances listed in Article 17 of the Regulations on the Administration of Registered Construction Engineers. The registered construction engineer himself and the employing enterprise shall promptly apply to the construction department for cancellation of registration; The relevant units and individuals have the right to report to the registration authority; The competent construction department or relevant department of the local people's government at or above the county level shall promptly inform the registration authority. Article 12 If a re-registered constructor cancels or refuses to register, he may apply for re-registration after meeting the registration conditions again, and the re-registration shall be handled according to the initial registration requirements. To apply for re-registration, the applicant shall submit the following materials: (1) Application Form for Re-registration of Second-level Construction Engineer; (two) a copy of the qualification certificate, academic certificate and identity certificate; (three) a copy of the employment contract signed by the applicant and the employing enterprise or a certificate of labor, personnel and salary relationship issued by the employing enterprise; (four) a copy of the certification materials that meet the requirements of continuing education. The application procedure and the number of copies of materials shall be handled according to the initial registration requirements. Article 13 If a registered construction engineer loses his registration certificate and practicing seal, he shall apply to the construction department for a replacement, and submit the following materials: (1) An application form for the replacement of his registration certificate and practicing seal by a second-class construction engineer; (2) a copy of the identity certificate; (3) The original loss statement published in newspapers at or above the provincial level. Article 14 If the registration certificate and practicing seal are defaced and replaced, the following materials shall be submitted when applying for replacement: (1) An application form for replacement of the registration certificate and practicing seal lost by the second-level constructor; (2) A copy of the identity certificate; (three) the original registration certificate and practicing seal. Article 15 A person who has obtained the qualification certificate of Grade II constructor may apply for registration in the following majors: construction engineering, highway engineering, water conservancy and hydropower engineering, municipal public works, mining engineering and electromechanical engineering. If the major indicated in the qualification certificate is housing construction engineering or decoration engineering, it shall apply for registration according to the major of construction engineering; If the major indicated in the qualification certificate is mining engineering, apply for registration according to the major of mining engineering; If the major indicated in the qualification certificate is smelting engineering, you can choose a major in mining engineering or electromechanical engineering to register; If the major indicated in the qualification certificate is power engineering, petrochemical engineering and mechanical and electrical installation engineering, the applicant shall apply for registration as a mechanical and electrical engineering major. Chapter III Examination and Approval Article 16 The provincial registered construction engineer's office shall check the material integrity of the registered applicant in accordance with the relevant provisions of initial registration, renewal registration, change registration, new registration, re-registration, cancellation of registration, replacement of lost materials and defacement. If there are errors in the application materials that can be corrected on the spot, the applicant shall be allowed to correct them on the spot. If the application materials are complete and conform to the statutory form, or the applicant submits all the corrected application materials as required, the applicant's application for registration shall be accepted. The applicant shall not be accepted or registered under any of the circumstances listed in Article 15 of the Regulations on the Administration of Registered Construction Engineers: (1) Not having full capacity for civil conduct; (2) applying for registration in two or more enterprises; (three) does not meet the requirements of continuing education of registered architects; (four) subject to criminal punishment, has not yet been completed; (5) Being subjected to criminal punishment for practicing activities, and less than 5 years have passed since the date of completion of the execution of criminal punishment and the date of application for registration; (6) Having been subjected to criminal punishment for reasons other than those mentioned in the preceding paragraph, and less than three years have passed from the date of the decision on punishment to the date of applying for registration; (seven) the registration certificate has been revoked, and it has been less than 2 years since the date of punishment decision to the date of application for registration; (eight) within three years before the date of applying for registration as the person in charge of the project of the construction enterprise, there have been major quality and safety accidents in the project in charge; (nine) the applicant's employment enterprise does not meet the requirements of registered enterprises; (10) Over 65 years of age; (eleven) other circumstances that laws and regulations do not allow registration. Seventeenth provincial registered construction engineer management office reported to the construction department to review the applicant's application materials, including qualification certificate, academic certificate, identity certificate, continuing education certificate and the original and photocopy of the employment contract. Eighteenth provincial registered construction engineer management office shall, within 15 days from the date of accepting the application for initial registration, re-registration and supplementary registration, review the applicant's registration conditions and application materials, and make a written review opinion. If it doesn't agree, it must explain the reasons. Article 19 Where an applicant applies for initial registration, re-registration, additional registration or renewal of registration, the construction department shall complete the examination and approval within 20 days from the date of receiving the written examination and approval opinions of the provincial registered architect management office, and publicize the examination and approval results to the public 10. If there is no objection, registration will be granted, and the Ministry of Construction will issue the registration certificate and practicing seal of China people's * * and national second-class constructor. Report to the Ministry of Construction for the record within 30 days after issuing the certificate. Article 20. If the application for change of registration or cancellation of registration is lost, the registration certificate and practicing seal are reissued or the application for replacement is defaced, the construction department shall go through the formalities within 20 days after receiving the written verification opinion, and destroy the reissued and recovered registration certificate and practicing seal. In case of cross-provincial change, the second-level constructor shall apply for change, and declare through the original employing enterprise in accordance with the declaration procedures. After the approval of the Ministry of Construction, it shall be examined and handled by the provincial construction administrative department. Article 21 The date of examination and approval is the date when the registration certificate is issued. The registration certificate is valid for 3 years from the date of issuance, and the practicing seal is the same as the registration certificate. Chapter IV Registration Certificate and Practice Seal Article 22 The registration certificate is made of dark green paper, rectangular, 124mm long and 87mm wide, and uniformly printed by the Ministry of Construction. (a) the registration certificate adopts two numbering systems. The registration number consists of a Chinese character and 12 Arabic numerals, and the certificate number is the serial number printed by the registration certificate of the whole province; (two) the registration number rules apply to the registration number of the second-level constructor and the second-level constructor. The Chinese characters of the registration number and the meaning of each group of numbers are: 1. The first Chinese character in the number represents the abbreviation of the currently registered province, and Yunnan is "Yunnan"; 2. The second representative is a registered builder, and the second level is 2; 3. The third and fourth digits indicate the administrative division code of the city and state where the enterprise is located at the time of initial registration: 4. The 5th and 6th digits indicate the year when the qualification certificate was obtained, and the year when the qualification certificate was obtained in 2005 is "05"; 5. The 7th and 8th digits indicate the year of initial registration, and if it is initial registration in 2007, it is "07"; 6. The number 9- 13 means that the applicant has registered the serial number in the city and state where the registration application is filed. For example, the number 1 means "0000 1". For example: Yunnan 20 105070000 1, which means that the registered architect is registered in Yunnan, Grade II, registered in Kunming for the first time, and obtained the qualification certificate in 2005. The first registration year was 2007, and the serial number was 0000 1. (3) The first Chinese character in the registration number represents the current registration. If it is renewed, changed or re-registered, the first Chinese character of the number will change with the change of the registered province, and the digital number is still the number at the time of initial registration. (4) The registration number of the registration certificate is the same as the practicing seal. Article 23 Practice Seal (1) Practice Seal Style The practice seal style is as follows: 1. The sealing form is concentric double ellipse. The specifications are: the major axis of the outer circle is 50mm, the minor axis is 36mm, the major axis of the inner circle is 36mm, and the minor axis is 22 mm The stamp color is dark blue. 2. The practicing seal shall be made according to the specifications and format of the sample seal, and shall be marked in turn: (1) "People's Republic of China (PRC) * * and No.2 Construction Engineer's practicing seal", in Song typeface, with a word height of 4 mm; (2) The name of the seal holder, in Chinese official script, with a word height of 4 mm; (3) Registration number and seal check code, in song typeface, 3.5mm in word height; (4) Registered major, Song Ti, with a word height of 3 mm; (5) The expiration date of the practicing seal is 2.5mm in terms of song style and word height; (6) The name of the employing enterprise is 4 mm 3. In "Yunnan 20 105070000 1(02)", "Yunnan 20 105070000 1" is the registration number, and 02 is the seal check code. 4. "20 10.09.07" in the sample stamp indicates that the effective deadline of the seal is 20 19.7. (2) Practice seal check code The seal check code consists of two Arabic numerals, indicating the cumulative number of reissues after the seal is lost and invalidated. At the time of initial registration, the check code is 00, the first 1 time is 0 1, and the maximum number is 99. (3) The registered major is referred to as Architecture, Highway Engineering, Water Conservancy, Municipal Public Works, Mining and Electromechanical Engineering. The abbreviations of various majors are connected by a space ",",indicating that there are multiple registered majors. For example, "Building Highway" is the specialty of building engineering and highway engineering. (4) No matter whether the applicant registers one major or multiple majors, only one registration certificate and one practicing seal can be issued. (5) If more than one major has been registered, and the expiry date of the registration period is different among the majors due to additional registration, renewal of registration or cancellation of registration, the expiry date of the practicing seal shall be the earliest expiry date of the registration period. Chapter V Other Article 24 After registration, the second-level construction engineer shall, when receiving the registration certificate and practicing seal, return the qualification certificate of the original project manager of the construction enterprise to the construction department where the application is located, and the construction department shall be responsible for destroying the certificate. Twenty-fifth the implementation measures shall be interpreted by the Ministry of construction.
For more information about project/service/procurement bidding, and to improve the winning rate, please click on the bottom of official website Customer Service for free consultation:/#/? source=bdzd