1. Connect the mobile phone to the computer through usb cable, and check "Settings->"; Wireless and network->; Binding and portable hotspot->; "USB binding" option, a virtual network card will appear on the computer. In order to distinguish easily, the name of the virtual network card is changed to: Android.
2.* * * Enjoy the computer network to Android network card;
3. Open the super terminal, and Sue becomes a super user. Check the mobile phone IP: # busyboxifconfig, mobile phone IP:192.168.43.100 (everyone is different).
4. Change the ip of the Android network card on the computer to192.168.43.6438+0;
5. Add default gateway: # busybox route Add default GW192.168.43.1(auxiliary software: busybox, z4root).
Important: The gateway IP on the mobile phone is the same as the IP on the computer.
Method 2: wireless network card, mobile phone AP
This method is suitable for notebooks or all-in-one computers with wireless network cards, but it does not support adhoc, so the third method is recommended. (Generally, only XP systems can use adhoc, and Android phones do not support adhoc. )
1, check "Settings->; Wireless and network->; Binding and portable hotspot->; Portable Wi-Fi hotspot "option, and set AP (such as MyAP);
2. Connect the computer to myAp and get the ip address (for example:192.168.23.121);
3. Add default gateway: # busybox routing Add default GW192.168.23.121(auxiliary software: busybox, z4root).
Important: The gateway IP on the mobile phone is the same as the IP on the computer.
Method 3: Support adhoc wireless network card and set up wifi. If the computer's own wireless network card does not support it,
In this way, you can buy a usb wireless network card that supports adhoc (usually with a driver, which can directly simulate AP for mobile phones) (in fact, this method is the same as the one we usually use WiFi to enjoy the guide), so this method is only a general description, because it can be replaced by software.
Here, take win7 as an example (a common system) to describe the general process:
1. Run the command prompt as an administrator;
2. Enable and set the "Virtual Wifi Network Card" mode; Run the following command to enable the virtual wireless network card: netsh WLAN set hosted network mode = allowsid =
3. Enable "Internet access * * * enjoyment (ICS)";
4. Open the wireless network: netsh wlan start hostednetwork；;
5. wifi set for mobile phone connection.