Southwest direction:
1
When the set-top box is not powered on, a SIM card and a smart card are installed on the set-top box;
2. Install the set-top box antenna, connect the set-top box with the TV, and connect the set-top box with the satellite receiver.
three
Turn on the TV and set-top box, and set up the set-top box through the remote control. Click the menu key of the remote controller, select system settings, and enter the password "nine thousand nine hundred and ninety-nine" to enter the settings;
four
Enter the network connection settings, set the IP to "114.251.156.067", set the port to "4567", and save it after confirmation (if the port setting box of individual set-top boxes needs five digits, please precede "4567".
five
Exit the menu, debug the satellite receiver and get the test signal (color bar signal, channel number is generally 999);
six
A yellow prompt page appears on the TV screen, and after displaying the base station information (5 lines), click the corresponding color (red or orange) button on the remote controller according to the screen prompt to save; Id number 62280 1
seven
After waiting for a period of time (the set-top boxes of different manufacturers will be different, about 30 seconds), a yellow prompt page will appear on the screen, showing "The smart card is not authorized, please press the confirm button for installation, press the return button for cancellation", please press the confirm button on the remote control;
eight
Wait for a while (different manufacturers' set-top boxes will be different, about 30 seconds), and a yellow page will appear on the screen showing "Sending Successfully"; (If "sending failed" is displayed, you need to turn off the power of the set-top box, unplug the power cord, reinstall the SIM card, and complete the installation operation of 3-7. )
nine
After receiving the prompt message of "successful sending", the words "Installing, please wait ..." will be displayed in the upper right corner of the screen, and a video picture of a TV program will appear on the screen about 30 seconds later;
10
In the upper right corner, "Installing, please wait …" will disappear automatically after a period of time, and then a yellow prompt page will appear in the middle of the screen to show that "Installation succeeded" will disappear, and users will accept TV programs normally. The installation process is completely completed; (Added program package, including 57 satellite TV programs)
Precautions for installation
1, the live broadcast equipment must be installed in the authorized area.
2. Before installation, be sure to check the user information and machine card and confirm that it has been reported to the direct broadcast satellite management center.
3. When installing, be sure to lock the center, set the network port number correctly, and lock the signal quality above 45%.
4. The mobile card must be installed before starting to avoid activating the built-in base station information and smart card. After the card is successfully opened (location information changes,), it takes 5- 10 days.
5. The base station information must reach more than 50%. If it cannot be reached, a spiral antenna will be wound on the GPRS antenna to enhance the signal.
6. Anyone who applies for machine adjustment should call and tell him not to turn on the machine again, and then authorize it after the installation team comes to the door. Before starting, he must load the mobile card to avoid the built-in base station information and smart card activation, which will take 5- 10 days after the card is successfully opened (location information changes,).