① Material brand-fill in according to the "material" in the incoming material identification card;
② Material specifications-fill in according to the "specifications" on the incoming material identification card; ; 3. Fill in the basis; 3. Fill in the basis; Example:; 1. The workshop picker goes to the raw material warehouse with production statistics/plans. ; Workshop picking list; Workshop work order; ; 3. After the materials are delivered to the production site, the material picker fills in the material identification card according to the contents on the material requisition, in which: ① See the "product name" on the material requisition; ② For material specifications, see the "Specifications" in the picking list; ③ For the batch number of materials, see "Batch Number" in the picking list; ④ See "Work Order Number" in the picking list for the work order number. After filling in, cut off the wrapping paper of the inner ring of raw materials, and stick a material identification card on the inner ring of raw materials, so that the stamping operator can trace back in production, and can completely fill in the daily report of stamping operation and JR quality tracking sheet, so as to quickly and accurately confirm the production of raw materials when changing materials. ; ; 3. Records in the production process; 1. Statistics of single product completion; (2) fill in the subject; (3) fill in the basis; Information in the work order; Information in the picking list; (4) Fill in the time; Error example:; 2. Daily report of stamping operation; New report; (1) Fill in the account; (2) fill in the instructions; ◆ The time in the daily report is set according to the machine tool 1 1 hour, which should be reflected in various states from the start of work to the end of work. If there is a blank, it is incomplete and incorrect.