How to inspect a blank house and master the skills of a good house.

At the beginning of buying a house, waiting for the delivery. For many first-time buyers, it is the first time to inspect the house. How to check the delivery of blank houses? What do you need to prepare in advance? It is not a sloppy thing to inspect the house now. You must do your homework before checking the house.

Yanfang won't leave.

1. Check the quality of doors and windows, and check the tightness, firmness, cat's eye clarity, window firmness, scratches, etc.

2. The ground, the top of the wall is flat, with and without empty drum, cracking, waterproof.

3. water and electricity. For the electrical part, check the number of circuits and instruments, and the sockets are in good condition and layout; For the water part, check whether the seals of water meter, drainage system and sewer pipe are intact and whether there is water seepage.

Must-have "Seven Artifacts", and master the skills of looking at the house.

table tennis

According to the code in architectural design and construction, a "ball-passing test" is needed after the installation of vertical pipes and horizontal pipes of indoor drainage pipes in residential buildings. The method is to put ping-pong balls in the sewer, then pour water, and then observe them in the first outdoor inspection well. If the ball flows out, it is qualified, indicating that the pipeline is well drained.

Table tennis can also be used to check the level of the bathroom. According to the specifications, the bathroom floor must have a slope towards the floor drain, but the slope may be only about two centimeters, which may not be visible to the naked eye, so you can put the table tennis at the door of the bathroom and at the root of the wall and gently push it to see if it rolls towards the floor drain.

Small mirror

Put a mirror at the top and bottom of the door to check these places that are usually invisible.

Small hammer

Empty drum is a common housing quality problem. Prepare a small hammer when inspecting the house, focusing on the places that are easy to empty, such as the middle of the wall and the sides of the window sill.

Test pen

According to the specification, only houses with water and electricity can be delivered. Use an electric pen to check whether the electricity is really connected.

tape measure

The tape measure can be used to measure the height of the floor, the size of the studio, the height difference between the bathroom and the living room floor, etc.

The "storey height" measured by ourselves is the clear height, and the floor thickness is the storey height agreed in the contract. The error is normal within 1.8-2 cm. If this figure is exceeded, the developer will rectify it.

basin

Toilets, balconies, kitchens and other places generally have floor drains. If the floor drain doesn't work, you can bring a surface. After pouring a few pots of water, see if the water flows in the direction of floor drain.

barge

When inspecting the house, there are reserved holes in the exhaust passage of the kitchen and bathroom, and whether the exhaust passage is normal can be detected with a lighter.

The above is the general process and skills of house inspection. As long as you master it, you don't have to be so flustered when checking the blank room. Housing inspection is a very delicate matter, and attention should be paid to all places, large and small, to avoid problems in the later housing.

(The above answers were published on 2015-10-16. Please refer to the actual situation for the current purchase policy. )

Sohu Focus provides you with comprehensive information on new houses, second-hand houses, renting houses and home improvement.