g73 P(ns)Q(nf)uδu wδw F _ _ _ S _ _ _ T _ _；
Δ d: The depth of each cut in the X-axis direction can be specified as the default value by the system parameter #40 13.
E: tool withdrawal amount, which can be specified by system parameter #40 12. The default value is.
Ns: cycle start sequence number nf: cycle end sequence number
Δ u: Finishing allowance in X-axis direction (outside diameter)
Δ W: Finishing allowance (length) in Z axis direction.
F: feed speed t: tool number
S: spindle speed setting
H: processing mode. If you enter 0, the Class I machining mode will be executed; If 1 is entered, the type II processing mode will be executed; If h is not specified, the system will judge the processing mode by itself.
G74 W d R e H _ _
g74 P(ns)Q(nf)uδu wδw F _ _ _ S _ _ _ T _ _；
D: The depth of each cutting in the Z-axis direction can be specified by the system parameter #40 13.
E: tool withdrawal amount, which can be specified by system parameter #40 12. The default value is.
Ns: cycle start sequence number nf: cycle end sequence number
δu:X-axis finishing allowance (outside diameter) δw:Z-axis finishing allowance (length).
F: feed speed t: tool number
S: spindle speed setting
H: machining mode, where 0 is used to execute Class I machining mode and 1 is used to execute Class II machining mode. When H is not specified, the system will judge the machining mode by itself.