1. Walk about 320 meters from Shenzhen Baoan International Airport and arrive at the airport station.
2. Take the subway 1 1 line, pass 8 stops and arrive at Futian Station.
3. Walk about 940 meters to Shenzhen.
How to take the self-driving route from Shenzhen Baoan International Airport to Shenzhen Convention and Exhibition Center: The whole journey is about 32.9 kilometers.
Starting point: Shenzhen Baoan International Airport
1. Start southwest from the starting point, drive for 300 meters, turn left and enter the pilot viaduct.
2. Drive along the pilot viaduct for 2.9 kilometers and go straight into the elevated airport south road.
3. Drive along Airport South Road150m, and go straight into Airport South Road.
4. Drive along Airport South Road for 3.0km and go straight into Hezhou Interchange.
5. Drive along Hezhou Interchange 1.4km and go straight into Beijing-Hong Kong-Macao Expressway.
6. Drive along Beijing-Hong Kong-Macao Expressway 18.4km, exit at Futian/Nanshan, turn right slightly and enter Futian Interchange.
7. Drive 400 meters along Futian Interchange and go straight.
8. Drive 6 10 meters, go to G4/G 15/ Guangzhou/Shennan Avenue, and go straight on the ramp.
9. Drive along the ramp for 750 meters and go straight into Binhe Avenue.
10. Drive along Binhe Avenue for 3.0km and go straight into Binhe Avenue.
1 1. Drive along Binhe Avenue for 520 meters, exit at Yitian Road/Jintian Road/Exhibition Center, turn right slightly and enter the auxiliary road of Binhe Avenue.
12. Drive along the side road of Binhe Avenue for 390 meters, turn left slightly in the direction of Hua Fu 3rd Road/Zhongxin4th Road/Exhibition Center (South) and enter the tunnel.
13. Drive along the tunnel for 6 10 meters and enter Zhongxin No.4 Road.
14. Drive along Center No.4 Road 10 meter, turn right and enter Hua Fu No.3 Road.
15. Drive along Hua Fu No.3 Road 190 meters, drive in the direction of Jintian Road/Binhe Avenue, turn right slightly, and enter Hua Fu No.3 Road auxiliary road.
16. Drive along the side road of Hua Fu 3rd Road for 90 meters, and then turn right.
17. Drive to the finish line.
End point: Shenzhen Convention and Exhibition Center
How can I get to the Art Exhibition Center from Block A of Shenzhen Baoan International Airport? Walk to the East Airport Station, take the Robo line and get off at Grand Theatre Station (Exit D).
Walk to Ye Zhen Building Station, take air conditioner No.321(or air conditioner No.336) and get off at Meiyuan Road Station.
Walk to the art exhibition center
How to take a bus from Baoan International Airport to Shenzhen Convention and Exhibition Center: e 10 → subway 1 line, the whole journey is about 3 1.5 km.
1. Walk about 2 10 meters from Shenzhen Baoan Airport and arrive at Shenzhen Airport Station.
2. Take e 10 and arrive at Science Park Station after 2 stops.
3. Walk about 270 meters to Shenda Station.
4. Take the subway 1 line, pass 10 station and arrive at the convention center station.
5. Walk about 260 meters to Baidu map of Shenzhen Convention and Exhibition Center.
How to get to Shenzhen Baoan International Airport from Tangxia Town, Dongguan City, Guangdong Province?
1. Go south from Huayuan New Street for 494 meters to Tang Xin Street.
2. Turn left at Tang Xin Street and drive 80 meters.
3. At the roundabout, take the third exit and drive along Zhang Shen Road for 0.9 km.
4. Turn left around Huanshi North Road 1.0km.
5. Turn left slightly at Yingbin Avenue1.3km..
6. Turn right slightly and continue to drive along Yingbin Avenue for 2.5 kilometers.
7. Take the ramp to Longlin Expressway.
The toll road section is 66 meters
8. At the crossroads, continue to turn left in the direction of Longlin Expressway and take Longlin Expressway.
Toll section1.8km.
9. Take the Dongguan-Shenzhen Expressway after the exit.
Toll section 5.6 kilometers
10. At Li Guang Toll Station of Guanshen Expressway, keep going and get on Meiguan Expressway.
Toll section 9. 1 km
1 1. Huizhou/Baoan Airport/Shantou/Guangzhou/clear lake Interchange/Yantian/Dameisha/Yanpai Expressway/Yantian Port Exit, Shangjihe Expressway.
Toll road section 0.5 km
12. At the intersection, continue to turn right in the direction of the machine-load expressway and take the machine-load expressway.
Toll section 2 1.9 km
13. Take Guangzhou-Shenzhen Expressway after exit.
The toll road section is 3.7 kilometers
14. Take the Chuangye Road at the exit of Bao 'an Airport/Fuyong/Huaide.
Part of the toll road section1.8km.
15. Go up the slope of 57 meters.
16. At the roundabout, take the 1 exit and take the airport ramp No.4150m.
17. Take Airport Road 4 for 0.5km..
18. Turn around 435 meters.
19.209 meters exit.
20. Continue straight for 5 1 m..
Shenzhen Baoan International Airport, Baoan District, Shenzhen City, Guangdong Province
How to take the self-driving route from Hong Kong to Shenzhen Baoan International Airport: The whole journey is about 76.5 kilometers.
Starting point: Hong Kong Special Administrative Region
1. Hong Kong Special Administrative Region Driving Plan
1) Drive from the starting point to the southeast, follow lower albert road 100 meters, cross the east wing of the office on the left, and turn left into Garden Road.
2) Drive along Garden Road 190 meters, pass the Yangtze River Group Center on the left for about 70 meters, then turn left and enter Queensway.
3) Drive along Queensway for 20 meters and turn left slightly into Queen's Road Central.
4) Drive along Queen's Road Central for 670 meters, cross Keda Commercial Building on the right and turn right into Potianzha Street.
5) Drive along Bitianzha Street for 40 meters, pass Prestige Sound on the right for about 90 meters, and go straight into Bitianzha Street.
6) Drive along Bidianzha Street for 40 meters, cross Huamao Building on the right, turn left and enter No.4 Road.
7) Drive along Line 4 1.2km, pass Jinyou Commercial Building on the left for about 70m, then turn left slightly in the direction of Kowloon (West)/Disney/Airport /3 and get on the ramp.
8) Drive along the ramp for 320 meters, pass through Baoding Center on the left for about 560 meters, and then go straight into No.3 Road.
9) Drive 5.9 km along Route 3 to Tsing Yi/Lantau Island/Airport /8, turn left slightly and enter Liwan Interchange.
10) Drive along Liwan Interchange 1. 1 km, and go straight into Highway 8.
1 1) Drive 5.5km along Line 8, pass the Nanwan Administration Building on the left, and turn left slightly in the direction of Yuen Long/Lantau Island/Airport /3.
12) Drive along the ramp for 5 10 meters and go straight into Highway 3.
13) Follow Line 3 12.8km, head for Lok Ma Chau and Sheung Shui /9, turn right slightly and enter Line 9.
14) Drive 500 meters along Line 9, cross Hongmao Bridge and go straight into Line 9.
15) Drive 6.3km along No.9 road, turn left at Shenzhen (truck)/Xintian/Azuma Tani exit and get on the ramp.
16) Drive along the ramp for 440 meters and go straight on the ramp.
17) Drive along the ramp for 60 meters, exit at 1, turn left in the direction of Shenzhen/Huanggang, and enter Shenxin Road.
18) Drive along Shenxin Road for 3. 1 km, and then turn right.
19) Drive 380 meters and enter Futian South Road.
20) Drive 330 meters along Futian South Road and turn left into Lily Road.
2 1) Drive along Baihe Road 140m, and turn left slightly on the ramp heading for Guangzhou/Nanping Expressway /G4/G 15.
2. Drive along the ramp 1.4km and go straight into Beijing-Hong Kong-Macao Expressway.
3. Drive along Beijing-Hong Kong-Macao Expressway for 26.0km, turn right slightly and enter Hezhou Interchange.
4. Drive along Hezhou Interchange 1.5km straight.
5. Shenzhen City Driving Plan
1) Drive for 200 meters, head for the terminal/Xixiang/Baoan Avenue, turn right slightly and enter Airport South Road.
2) Drive along Airport South Road for 2.9 kilometers, turn left slightly towards the terminal building/pilot viaduct, and enter the pilot viaduct.
3) Drive along the pilot viaduct for 3.0km to reach the destination.
End point: Shenzhen Baoan Airport
How to get to Huaqiang North from Shenzhen Baoan International Airport? Huaqiang North: Futian District is located in the middle of Shenzhen Special Economic Zone. It starts from Hongling Road in the east, reaches OCT and Nanshan District in the west, reaches Bijiashan and Lianhua Mountain in the north, reaches Zhi Min Street in Baoan District, and is connected with Luohu District. Shenzhen River and Shenzhen Bay in the south face Mai Po and Yuen Long in the New Territories of Hong Kong. Futian District is the seat of Shenzhen Municipal Party Committee and Municipal Government, the key development and construction center of Shenzhen, and will be built into the administrative, cultural, information, international exhibition and business center of Shenzhen.
How to take the bus line from Shekou to Shenzhen Baoan International Airport: Line 2 → subway 1 1, the whole journey is about 26. 1 km.
1. Walk about 350 meters from Shekou and arrive at Ocean World Station.
2. Take Line 2, pass 6 stops and arrive at Houhai Station.
3. Walk for about 300 meters, and then transfer to subway line 1 1.
4. Take the subway 1 1 line, pass five stops and arrive at the airport station.
5. Walk about 230 meters and arrive at Shenzhen Baoan International Airport.
How to take the bus from Changlong to Shenzhen Baoan International Airport: Line 5 → subway 1 1, the whole journey is about 43.4 kilometers.
1. Take Line 5 from Chimelong and arrive at Qianwan Station after 20 stops.
2. Take the subway 1 1 line, pass three stops and arrive at the airport station.
3. Walk about 230 meters and arrive at Shenzhen Baoan International Airport.
How to get from Gushu to Shenzhen Baoan International Airport by bus: 1 line, 6.4 kilometers.
ancient book
Take the 1 line, pass 2 stops and arrive at the East Airport Station.
Walk about 630 meters and arrive at Shenzhen Baoan International Airport.
Shenzhen Baoan international airport