Tools/raw materials:
1, host 1 or 1 standby (or server), host for installing cloud service software (genuine cloud service software is distributed with cloud terminal products for free and upgraded for free), and host configuration (according to the configuration of driver 10).
2. There is 10n computing L230 cloud terminal (there are different models of computing, please choose the appropriate model according to your actual situation).
3. Other peripheral devices (devices used to form a network environment) 1 1 PS/2 mouse and keyboard, 1/monitor,1switch with more than 24 ports, and multiple network cables.
Steps/methods
Build a LAN with routers, one of which is connected to the server and the other is connected to this NCOMPUTINGL230. In addition, NCOMPUTING is also connected with a display, a mouse and a keyboard. So the preparations are finished. The server (right) and NC (left) are all ready, so it's time to install the server software on the server. After installation, you need to restart, and then log in by setting 10 user in management. (according to the actual situation, set up multiple users as needed. If the router has DHCP function, then NCOMPUTING can find the server correctly. If a switch is used, the following IP addresses should be set in the options, and so on.
After the connection, the login interface appears, as if you have multiple users logging on to the same computer.
Entering the user and password just set on the server will generate a desktop, which is equivalent to two users logging in to a computer at the same time, but separate the display from the input device, and both computers use a server to calculate.
Precautions:
According to the different connection modes with physical PC computers, NCOMPUTING is divided into three series:
1.l series (L 130/L230/L300): PC is connected via Ethernet, which is not limited by distance in the local area network.
2.u series (U 170): connected to PC through USB 2.0 cable. Limited by USB specification, the maximum length of USB cable connected between hardware and physical PC is 5 meters (which can be upgraded through active USB Hub).
3.x series (X350/X550): It is a hardware board based on PCI interface and installed on the internal motherboard of the computer. The hardware connected to the NCOMPUITNG cloud terminal is connected to the PC through the super class 5 twisted pair or class 6 twisted pair, and the distance between the cloud terminal and the host is limited to 10 meter.
1 server can host 30 NComputing cloud terminals, but when your scale is expanding, you can buy various servers as long as the client of NComputing is connected to any server in a local area network. (Now 1 server can carry 100 N computing cloud terminals at most)
Please choose the appropriate cloud terminal model according to your actual situation, or consult Shenzhen Tianyuan Tengchuang Technology Co., Ltd., the core agent of cloud terminal, to recommend the appropriate model.
References:
/article/0964 ECA 2d d 07 ed 8285 f 53606 . html