(1) Demolition shall be commanded by a special person, practical safety measures shall be taken, and the working area shall be marked below. Non-operating personnel are strictly prohibited from entering the operation area. (2) Check whether the tools used are firm before work, and tools such as wrenches must be hung on the body with rope chains. Concentrate on your thoughts when you work, to prevent nails from sticking your feet and falling into the air. (3) Generally, a long crowbar should be used to dismantle the formwork, and it is forbidden for the operator to stand on the formwork being demolished. (4) The dismantled formwork, columns and supports shall be transported away in time or properly stacked. It is forbidden for operators to stand on it or hold it with their hands to prevent them from falling when holding or stepping on it. (5) When there are reserved holes in the concrete wall and slab, safety guardrails should be installed on the hole in the wall or the slab hole should be tightly covered at any time after formwork removal. (6) When removing gaps, move templates, columns and supports. Should be fixed firmly to prevent sudden fall and collapse. (7) When dismantling the foundation and underground engineering formwork, check the soil wall of the foundation trench first. If unsafe factors such as soft cracks are found, preventive measures must be taken before people can work. Dismantled formwork and supports shall not be stacked in the range of foundation trench 1m, and shall be transported with the demolition. (8) Demolition shall be carried out one by one, and it shall not be loosened, pried open or pulled down. (9) Dismantle the bottom formwork of the platform layer and set up temporary support to prevent the big formwork from falling. Especially when dismantling the column, the operator should stand outside the doors and windows to dismantle it, and should prevent the template from falling suddenly and hurting people. (10) It is forbidden to stand on the suspended wall structure and beat the bottom die. (1 1) When dismantling high and narrow prefabricated formwork, support shall be provided at any time to stabilize the formwork and prevent dumping from hurting people. (12) Everyone should have enough working faces. When several people operate at the same time, they should divide their work scientifically and unify their signals and actions. .
If you want to know more about the construction information such as "Precautions should be taken when dismantling formwork", you can consult the link search of architecture and design in Zhong Da.
For more information about project/service/procurement bidding, and to improve the winning rate, please click on the bottom of official website Customer Service for free consultation:/#/? source=bdzd