Once, and then once a year. In this way, if you develop a customer, you can establish a customer file, we repeat the service and the customer repeats the consumption. Have you ever thought about bathing the tap water pipe at home? Now, there are also those who provide this service.
Cleaning company, specializing in cleaning water supply pipes, drainage pipes and water tanks for hotels, families and offices. always
Since then, even five-star hotels in Shanghai have the habit of washing dishes and brushing chopsticks, but I never thought that tap water that I thought was clean at home might be rust water or dirty water floating with impurities such as algae and bacteria. Because the tap water pipeline is closely related to people's life and life, it must be cleaned by physical methods. Pneumatic pulse cleaning technology is based on gas and water, and is formed by high-speed jet and controllable pulse.
Physical waves will impact and vibrate the pipe wall, peel off scale and deposits layer by layer, and quickly remove the outside of the pipe to achieve the purpose of cleaning. It has no corrosion to pipelines, no pollution to emissions, and can effectively purify water. Pulse cleaning or chemical reagent cleaning, pulse cleaning, which is called high frequency in some places, pulse cleaning with water and gas; In some areas, the hardness of water is high, which can not be completely satisfied by pulse cleaning alone.
Effect requirements, need to add cleaning agent, cleaning by chemical circulation method. Cleaning equipment pulse cleaning equipment, chemical reagent circulating cleaning equipment. It is worth noting that pulse or high frequency can't effectively complete the circulating cleaning of chemical reagents, because chemical reagents react with scale and other dirt, and sufficient contact time is needed between them, and pulse relies on high-speed jet to clean the cleaning agent.
When it is brought into the tap water pipeline, it flows out quickly, and the cleaning agent molecules queue up to flow through the inner wall of the pipeline, and the cleaning agent molecules in contact with the scale molecules are constantly replaced. The effective contact time is too short, the chemical reaction cannot be carried out effectively, and the pulse is clear.
Chemical reagent circulation cleaning can not effectively complete cleaning. How often do you wash it after cleaning? Answer: In principle, once a year. If a full-size water filter is installed, it can be delayed for half a year to one year. Answer: the water flow becomes smaller; The water heater won't light; The filter screen at the end of the faucet is stuck; When you come back in the morning or go on a business trip for a few days, rusty water will flow out of the faucet; If the tap water is muddy or sandy, or the house is more than five years old, as long as one of the above conditions exists, it means that your tap water pipe needs to be cleaned. Question: How can you tell that your water pipe is dirty?