What kind of car is the rail car ferry of the electric flat car?

The name of car ferry comes from its use environment and occasions. For the practical needs of some factories, laying two or more tracks, the battery-powered track flat car needs to be transferred from one track to another. According to this customer's situation, Xinxiang Xinlide Machinery Manufacturing Co., Ltd. has designed a scheme, which is to dig a pit between two tracks, then lay a horizontal track and put a laterally moving electric flat car. The flat car is required to be laid on the track, and the electric rail car for transporting objects can be placed on the electric flat car, and then the flat car will return to the next place and stop docking. The rail car began to enter the next track. Xinli machinery calls this kind of rail car a ferry rail car.

Q: What is your shuttle bus? What is the difference with ordinary rail transit vehicles?

A: The ferry rail car is composed of two-story rail cars. It is a car ferry used for changing tracks of more than two parallel tracks. The carriage is divided into two floors. The cart on the lower floor pulls the car. There are tracks on the platform of the cart, and the track gauge is the same as that of the three tracks on the ground, so that the cart can get off the cart and walk on the track on the ground.

Q: Do you need to dig a pit for the ferry rail car?

Answer: Yes, the depth of the pit is the same as the height of the cart, and the track on the cart platform can be flush with the track on the ground.

Q: In this case, the lower the height of the table and the shallower the pit, we will save more money. Excuse me, which model has the lowest platform?

Answer: this can't be generalized, it should be like this. First of all, it depends on how long your cart runs. If it is less than 20 meters, it is recommended to use towing cable to ferry the rail car. This kind of car has low cost and the lowest table height among these models, but it cannot be used for long-distance ferry rail cars. If the distance is too long and the table is the lowest, you can use the flat car powered by the sliding contact line, which needs to be installed.

Xinxiang 100% car ferry