Measurement method
1, the length of a horizontal circle around the bottom of the breast is the length of the next week of the chest, in cm. When you buy a bra, you often choose a approximate number that is similar to your bra size according to your lower bust. For example, if your lower bust is between 68 cm and 72 cm, please choose size 70.
The letters are cups.
The "b" and "c" in the above example are cups.
The calculation formula of cup is: cup size = upper bust size-lower bust size.
2. The measurement method of bust size is as follows:
The length of a horizontal circle around the highest point (nipple) of the chest is the bust size. If you encounter decimals when measuring dimensions, it is recommended to adopt the progressive method, for example, 72. 1 cm, and calculate it as 73 cm.
After getting the size of the upper and lower bust, start to calculate the size of the cup:
Subtract the upper bust from the lower bust to get the difference between the upper and lower bust. Through the following comparison table of girth difference cups, the most suitable cup size can be obtained.
Pay attention to three points when measuring bra size:
The calculated number of cups is not necessarily the size that should be bought in the end. There are three possibilities:
1) Too much fat: the number of cups should be one level higher. (For example, when the difference is C, D is usually selected.)
2) The calculated difference is vague: try to choose a larger cup model, so that the breasts have room for development. (For example, if the difference between C and D is 15, D is usually selected. )
3) The breast shape is flat as loose sand: the smaller the measurement difference, the greater the cup grade. (For example, if the lost fat is molded according to the scientific dressing method, the measured difference is the B cup, so the selected cup is the C cup).
Wearing method
After measuring the bra size, the correct way to wear it is:
First, the upper body leans forward 45 degrees, the arms pass through the shoulder straps, the shoulders are hung down, and the lower part of the cup is held by both hands.
Second, keep the upper body leaning forward and buckle the back hook to make the chest enter the cup smoothly.
Third, after the buckle, the left and right shoulder straps are gently pulled up and adjusted to the most comfortable position. It is advisable to put the second finger in, so that it will not be too tight or too loose.
Fourth, the position of the back hook should be fixed under the scapula in parallel.
Fifth, adjust the exposed chest to the cup, so that the whole chest is in a natural state.
Coiling method
Choose different bra cup shapes;
1/2 cup bra The shoulder straps of this bra can usually be removed to become strapless underwear with off-the-shoulder clothing;
3/4 cup bra has strong concentration and good gathering effect, which effectively highlights the chest curve;
Full-cup bra completely wraps the chest to prevent sagging and expansion of the chest, which is suitable for any chest type.