Technological features: the wall is textured and the operation is quick. The fine elastic coating has smooth surface, concave-convex feeling and soft surface. The medium-thick elastic coating has strong texture and decorative function, and can be made into various shapes. The surface of bullet coating is irregular calendered particles.
2. Pour the bagged diatom mud into the bucket, and the mixing ratio is about 1: 0.6.
3. Put the electric stirrer into the bucket for standby, and the stirring time is about 20-30 minutes.
Put diatom mud into the electric pump spray gun, the air pressure is 0.8Mpa, and spray the wall from the upper left corner. Cross it back and forth, spray it on the wall, and spray it with granular diatom mud, whichever is evenly applied on the wall.
4. Stir until it becomes a paste, and there are no obvious unmixed diatom mud particles.
The mixing ratio of diatom mud and clear water in natural space is about 1: 0.6, and the stirring time is about 20-30 minutes until it is mixed into paste, and there are no obvious undisturbed diatom mud particles.
5, clean up the dust in front, and do not need to spray the place (walls, furniture, electrical appliances, etc.). ) with protective film, package protection.
6. First, use a trowel to batch the bottom diatom mud on the putty layer of the wall, with a thickness of about 0.3 mm. From left to right, from top to bottom, evenly smear one side.
When the wall surface is dry, light will be collected. Gently place the spatula made of low carbon steel on the wall, and the included angle between spatula and wall should be 30. Cross back and forth and gently press the wall.