1, upshift
Before starting, squeeze the clutch and step on the first gear. Come on, slowly release the clutch. As long as the clutch is completely released, you can enter second gear. Anyone who has learned these steps knows when to shift up and when to shift. This needs to be adjusted according to engine characteristics and road conditions. When the road conditions are good, there are few people, so it is necessary to drive at a constant speed and economically, and choose high-grade and low-speed. As long as you don't turn off the engine, try to use high-grade engine and keep the engine running at low speed, which can save fuel and machinery.
Traffic jam, you need to wear a car, try to maintain high speed, one is to make a louder sound to let the car in front notice you, and the other is that the engine will have better power at high speed and can accelerate at any time. When cornering, slow down and downshift before entering the corner (downshifting will be mentioned later). Don't shift gears up and down when cornering (improper operation will cause the rear wheel to lose its grip and drop the car), keep the throttle, and then upshift after exiting the corner.
2. Shift down.
When it is predicted in advance that deceleration is needed, engine braking can be used to decelerate. Tighten the clutch, downshift, replenish oil, and immediately release the clutch. Repeat the above steps after the engine speed drops. This action is the same as the heel of a car. You need to master the degree of oil replenishment through practice. After practice, you won't feel the car pulling or rushing forward every time you downshift and replenish the Chinese pine clutch. If you feel a pulling feeling, it means that the oil supply is not enough, and the purpose of rushing forward is to replenish more oil.
It is necessary to downshift and replenish oil when driving violently and cornering, especially when riding in a long row, the rear wheel has great grip. Incorrect downshift will impact the crankshaft and clutch, which will be easily damaged after a long time. When the road is slippery, it is easy to cause the rear wheel to slip.
Extended data:
Precautions for motorcycle driving:
When the motorcycle is running, if the engine power is insufficient (such as uphill) or there are obstacles on the road, it should be shifted down in time. The key points of shifting from high gear to low gear are: first, turn down the throttle, reduce the speed, quickly hold the clutch handle and shift to the required gear, then gradually loosen the clutch handle and increase the throttle. When shifting from high gear to low gear, the vehicle speed must be reduced to a speed close to that of gear shifting. Otherwise, due to the high speed, the engine will have a great binding force after being put into gear, causing damage to related transmission components.
References:
Baidu encyclopedia-motorcycle