Stop:0x000000FE blue screen reason: running Windows7 or WindowsServer2008R2 computer. When the computer enters or recovers from the sleep state (S3) or the hibernation state (S4), the computer may fail.
This problem may occur if a USB composite device that supports the selective suspension function is connected to the computer. This problem occurs because there is a conflict in the Usbccgp component.
Stop:0x000000FE Blue Screen Solution: Just disable the hibernation and sleep functions, or get a support patch from Microsoft.
Extended data:
An effective method to solve the blue screen of general computer;
1, restart the computer, press F8 all the time before entering the system, and select the final correct configuration.
2. If the software or driver is installed in front of the blue screen, enter the safe mode, uninstall or delete the newly installed software and driver, and then turn it on and have a try.
3. If the screen is still blue after deletion, or you can't enter safe mode at all, reinstall the operating system.
4. If the screen is still blue after reinstalling the system, consider the hardware problem. First of all, clean up the dust inside the computer thoroughly, remove the equipment on the memory, graphics card and PCI slot, and clean it with an eraser. Too high temperature and poor contact caused by dust can also cause blue screen; At the same time, remove the fans such as CPU and graphics card and replace them with new heat dissipation silicone; Also check whether the temperature of all hardware is normal.
5. If it still doesn't work after cleaning the computer, it is recommended to find professional maintenance personnel to deal with it.
6. Check the hardware replacement in the following order: memory, hard disk, graphics card, motherboard, power supply, other hardware and CPU.