The use of the heater is relatively simple because there is a time controller, and the operation of the electric heater is controlled by the time controller. This boot time setting can be set by the worker during installation, or you can call after-sales consultation by reading the instructions.
The heat storage electric heater only needs to be electrified for a period of time, and does not need to be electrified all day. The power consumption of this electric heater is the same as that of ordinary electric heaters, except that it does not need to be electrified all day, so it is more energy-saving. It consists of an air switch, a time controller and a heater body. The main body of the heater is composed of heat storage bricks, heating pipes, insulation layers and connecting wires, which need to be assembled on site.
Extended data:
The use of electric heater is introduced as follows:
The models of regenerative electric heaters are divided into 1600W, 2400W and 3200W according to power. According to the indoor thermal insulation.
If the heat preservation is good, it shall be calculated as average 100W, and the difference shall be calculated as 200W. Methods: 1600 w/100 w =16 flat, 1600w/200w=8 flat (i.e.1600 flat
At the same time, we should also pay attention to the wire load at home. Because the thermal storage electric heater does not need to be turned on all day, it can be heated all day by turning on 10 hour every day. So it saves a lot more than the direct electric heater. There is a baffle at the radiator outlet of the heater. In order to control heat dissipation, it can be adjusted by the left knob in the upper right cover plate of the heater. When you turn the knob, you can see that the baffle at the radiator outlet opens and closes.
Baidu encyclopedia-regenerative electric heater
People's Network-Beijing coal to electricity will introduce intelligent heat storage electric heaters to continuously release heat 16 hours.