2. The main components of nutrients are sawdust and bran, followed by 1% sugar, 2% lime powder and other trace fertilizers, accounting for about 1% of the total. Then add water and stir, add water according to the principle of one to two, and then stir evenly. It should be noted that it needs to be stirred every three hours or so, and it can be loaded after three times. After distribution, it needs to be planted according to different conditions.
3. First, you need to select the strains of Dictyophora dictyophora, then you need to wear sterile clothes and disinfect the tools and equipment used for inoculation before inoculation. Inoculation is usually carried out at reasonable intervals. Generally, the row spacing is 8 cm and the plant spacing is about 6 cm. They are neatly arranged on the cultivation bed, and finally a layer of bamboo leaves is gently covered on it.
4. The management of fruiting, that is to say, in the process of the development of Dictyophora dictyophora mycelium, the most important issues are the management of temperature and humidity, light and air circulation. First of all, after the mycelium grows, it should be covered with a layer of fine soil with sufficient fertility and then covered with a layer of bamboo leaves. At the same time, at least the air circulation in the fungus room should be ensured every day, and the temperature should be controlled at about 24 degrees and the humidity should be controlled between 800% and 95%, so that the Dictyophora can wait for growth.
5. First of all, it should be noted that the nutrients planted are mainly bamboo leaves and bamboo poles. Try not to use chemical fertilizer, only add a little trace element fertilizer. Secondly, the planting temperature should not be lower than 15 degrees and higher than 35 degrees. Then, the humidity in the air should not be lower than 70%, and the humidity in nutrients should not be lower than 50%. Finally, we should pay attention to cleaning up the planting area.