How to install the ground stone? What should I pay attention to when installing?

With the improvement of modern people's quality of life, the requirements for home and home decoration are also constantly improving. As a natural product, stone can make the family present an artistic, historical and heavy effect, which is more and more loved by people. However, in the installation process of ground stone, only strict stone installation technology can show the original appearance of natural stone, so what should be paid attention to? Let's study together. Because natural decorative stones are natural products, the pattern and color characteristics of each plate will not be consistent. It is necessary to gradually extend and transition patterns and colors through mosaics (colors) in order to achieve overall color harmony. Number immediately after mosaic (color), so that it can be put in place according to the number when installation. The serial number can be written on the board by pasting labels or using wooden crayons, but it is forbidden to scribble marks on the surface of the slate with liquid color to prevent colored liquid from infiltrating into the stone and leaving indelible marks. During installation, firstly, clean water mud shall be painted on the ground, and then 12.5 cement mortar shall be used as the bottom layer, which shall be compacted and leveled, and then the stone shall be pasted after the clean water mud is poured. The thickness of cement mortar base is not less than 20mm, and no one may walk or press heavy objects within 8 hours after paving stone, so as to avoid empty shells or unevenness. At the same time, it must be noted that some imported stone materials have plastic grids on the back, and the flaky grids must be torn off before installation. When all stone decorative panels are fixed, they should be renovated. Because there is always flatness tolerance in a single stone veneer, it is inevitable that there will be unevenness when flat-fell seam is combined into a plane, so flat-fell seam leveling is an indispensable link in the installation project. Another important task of decoration is to remove all kinds of stains on stone veneer, especially cement mortar stains, which should be removed at will. After decoration, the stone surface must be waxed and maintained to protect the luster of the stone facing and reflect its best decorative effect. It is best to use white car wax as wax, as long as a thin layer of car wax is coated on the stone veneer, and then scrubbed with soft yarn and towel. Just scrub it every two weeks in the future. With a good installation process, we should also pay attention to regular maintenance and maintenance of luster. Dust removal and cleaning alone can't keep the bright stone shiny, so we must regularly ask professional stone maintenance personnel to do maintenance and luster regeneration. I hope my answer is helpful to you. If you think it's awesome, give me a thumbs up, and I will be more confident to answer later.