1. Check the equipment manual: First, please check the user manual or manual of the intelligent robot you purchased. Find detailed instructions on how to enter the distribution network mode.
2. Reset the device: If you can't find the relevant information or you can't successfully enter the distribution mode after trying the corresponding method, please try to reset the device. Usually, a small hole can be found on the back or bottom of the device, and the reset operation can be completed by gently pressing and holding it for a few seconds with slender objects such as needles and toothpicks. Please note that before performing this operation, make sure that all data and settings saved on the instrument will be cleared.
3. Check the network environment: At the same time, make sure that the Wi-Fi network you are using is working normally, and the signal strength of the wireless router is enough to cover the area where the intelligent robot is located. If there is a problem with the network, it is recommended that you contact the network service provider for help.