A. What majors does the engineering consulting qualification include?
The professional qualifications of engineering consulting
A. What majors does the engineering consulting qualification include?
The professional qualifications of engineering consulting units are divided into the following 365,438+0 majors: (1) Highway; (2) Railways; (3) Urban rail transit; (4) Civil aviation; (5) water and electricity; (6) nuclear power and nuclear industry; (7) thermal power; (8) Coal; (9) Oil and natural gas; (10) petrochemical industry; (xi) Chemical industry and medicine; (12) Building materials; (13) machinery; (14) electronics; (15) light industry; (sixteen) textiles and chemical fibers; (17) steel; (eighteen) non-ferrous metallurgy; (XIX) Agriculture; (20) forestry; (2 1) communication information; (twenty-two) radio, film and television; (twenty-three) hydrogeology, engineering investigation, geotechnical engineering; (24) water conservancy projects; (twenty-five) port river and sea engineering; (twenty-six) ecological construction and environmental engineering; (twenty-seven) municipal public works; (28) architecture; (29) urban planning; (thirty) comprehensive economy (not limited to specific majors); (31) Other (to be filled in by specific major) building qualification is Rong Zhi.
B. Grade A engineering consulting qualification
Order of People's Republic of China (PRC) Ministry of Construction
Measures for the Administration of Engineering Cost Consulting Enterprises 149 No.
Chapter IV Consulting Management of Project Cost
Nineteenth engineering cost consulting enterprises engaged in engineering cost consulting activities according to law, not restricted by administrative regions.
Grade A engineering cost consulting enterprises can engage in engineering cost consulting business of various construction projects.
Grade B engineering cost consulting enterprises can engage in engineering cost consulting business of various construction projects with engineering cost less than 50 million yuan.
Twentieth engineering cost consulting business scope includes:
(a) the construction project proposal and feasibility study investment estimation, project economic evaluation report preparation and audit;
(two) the preparation and review of the construction project budget, with the design scheme comparison, optimization design, quota design and other work, analysis and control of the project cost;
(three) the determination of the contract price of the construction project (including the compilation and review of the bill of quantities and the pre-tender estimate of the bidding project); Signing and adjustment of contract price (including engineering change, engineering negotiation and calculation of claim cost), project payment, project settlement and compilation and audit of completion settlement report, etc. ;
(4) Appraisal and arbitration consultation of economic disputes over project cost;
(5) Providing engineering cost information service, etc.
Engineering cost consulting enterprises can manage and serve the organization and implementation of construction projects in the whole process or in several stages
Twenty-first engineering cost consulting enterprises shall conclude a written engineering cost consulting contract with the client when undertaking engineering cost consulting business of various construction projects.
The project cost consulting enterprise and the client may conclude a contract with reference to the construction project cost consulting contract (model text).
Twenty-second engineering cost consulting enterprises engaged in engineering cost consulting business shall issue engineering cost documents in accordance with the requirements of relevant regulations.
The engineering cost achievement document shall be stamped with the practicing seal of the enterprise name, qualification grade and certificate number by the engineering cost consulting enterprise, and signed and stamped with the practicing seal by the registered cost engineer who performs consulting business.
Article 23 Where an engineering cost consulting enterprise establishes a branch, it shall, within 30 days from the date of obtaining the business license of the branch, submit the following materials to the competent construction department of the people's government of the province, autonomous region or municipality directly under the Central Government where the branch is located for industrial and commercial registration:
(1) A copy of the business license of the branch;
(two) a copy of the qualification certificate of the engineering cost consulting enterprise;
(3) Copies of the registration certificates of not less than 3 registered cost engineers who intend to practice in branches;
(4) Lease contract or property right certificate of the fixed office space of the branch.
The people's governments of provinces, autonomous regions and municipalities directly under the Central Government shall, within 20 days from the date of accepting the record, report to the competent construction department of the State Council for the record.
Article 24 If a branch company engages in engineering cost consulting business, the engineering cost consulting enterprise that established the branch company shall be responsible for undertaking the engineering cost consulting business, signing the engineering cost consulting contract and issuing the engineering cost achievement document.
Branches may not undertake engineering cost consulting business in their own names, conclude engineering cost consulting contracts, and issue engineering cost achievement documents.
Article 25 Where an engineering cost consulting enterprise undertakes engineering cost consulting business across provinces, autonomous regions and municipalities directly under the Central Government, it shall, within 30 days from the date of undertaking the business, go to the competent construction department of the people's government of the province, autonomous region or municipality directly under the Central Government where the construction project is located for the record.
Twenty-sixth engineering cost consulting fees shall be stipulated by the parties in the construction project cost consulting contract in accordance with the relevant provisions.
As can be seen from the above, the difference between different qualifications is mainly reflected in the different conditions required to obtain this qualification and the different business inputs that can be undertaken.
C. How can I check whether the Grade A engineering consulting organization is true?
Engineering cost consulting enterprises are engaged in engineering cost consulting activities according to law and are not restricted by administrative regions.
Grade A internal price consulting enterprise: engaged in engineering cost consulting business of various capacity construction projects.
Grade B cost consulting enterprise: it can engage in engineering cost consulting business of various construction projects with engineering cost below 50 million yuan.
Business scope includes:
1, construction project proposal and feasibility study investment estimation, project economic evaluation report preparation and review;
2. Prepare and review the construction project budget, and analyze and control the project cost with the help of design scheme comparison, optimization design and quota design.
3, the determination of the contract price of the construction project (including the tender project bill of quantities and pre-tender estimate, tender offer preparation and audit); Signing and adjustment of contract price (including engineering change, engineering negotiation and calculation of claim cost), payment of project funds, compilation and review of project settlement and completion settlement report, etc. ;
4. Appraisal and arbitration consultation of economic disputes over project cost;
5. Provide engineering cost information service, etc.
I hope it helps you. Class a should not be online. Because the qualification of cost consulting enterprises has two sections, and Grade A is the highest level.
D. how to check the authenticity of the qualification certificate of the company's engineering consulting unit?
There must be at least five registered consulting engineers in engineering consulting class B. You can check the engineering consulting network to see if there are five registered consulting engineers in their unit. If not, it must be fake. If there is, it may be true.
E. where can a registered consulting engineer inquire?
I think I know what you're asking.
Enter China Engineering Consulting Association to check members.
//cn AEC . cn/Work/refer/search . ASP
Qualification certificate of engineering consulting unit in feasibility study report
It's usually printed. I also work in a consulting company. I always use the printed version and never use the printer.
G. What are the requirements for engineering consulting qualification?
All units applying for engineering consulting qualification generally need to start with Grade C qualification, which needs to meet the following conditions:
1, with a registered capital of not less than 500,000 yuan (except institutions);
2. Having a fixed office space of not less than 6 square meters;
3. There is proof of performance;
4. Have a strict quality management system;
5, each professional field needs to be equipped with not less than 5 professionals, and at least 1 registered engineering consultants;
6, the main person in charge should have intermediate or above technical titles, and engaged in this work shall not be less than 5 years.
(7) Engineering consulting qualification certificate query extended reading:
In a narrow sense, the main business of engineering consulting is to prepare the feasibility study report, project proposal, project application report, fund application report, planning consultation and evaluation consultation of investment projects. Generally speaking, the engineering consulting industry is an intelligent service industry. Its function is to provide consulting services for departments and investors to make investment decisions, implement economic construction and engineering projects by using multidisciplinary knowledge and experience, using modern science and technology and management methods, and following the principles of independence, science and justice, so as to improve macro and micro economic benefits.
Engineering consultation refers to the intellectual service that follows the principle of independence, science and justice, and uses the knowledge and experience of engineering technology, science and technology, economic management, laws and regulations to provide consulting activities for the decision-making and management of engineering construction projects of * * * departments, project owners and other customers. , including pre-project consultation, survey and design consultation, construction consultation, commissioning or post-delivery evaluation.
H which website or department should I check the authenticity of the engineering consulting certification certificate?
China engineering consulting network.
First, how to check the authenticity of the qualification certificate of registered consulting engineer?
On the website of China Engineering Consulting Association (//cnaec.cn/), click on the registered consulting engineer (investment) database, click Query, and enter a special name to query.
J. how to apply for the engineering consulting qualification certificate?
In the past, both the Ministry of Construction and the National Development and Reform Commission could issue engineering consulting certificates, but now only the certificates of the National Development and Reform Commission are recognized. Go to the National Development and Reform Commission.